Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear m ....Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear medicine). The project also seeks to extend the Australian nuclear research capability by developing an innovative technique to study radiation damage using the OPAL reactor at ANSTO.Read moreRead less
Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. In ....Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. Innovation: For the first time, the properties controlling photo-sensitivity (defect disorder; charge transport; and chemically-induced, local, surface electric fields) will be modified. Outcomes: Technologies for the production of fuel (hydrogen) using renewable energy (solar energy) and a renewable resource (water).
Read moreRead less
Chip-scale implantable bionics for next generation therapeutic neural prostheses. Australia has an unmatched reputation as a world leader in neuroprostheses. Most notable of these is the bionic ear and, more recently, leading edge research towards a bionic eye. This project will combine the research strengths and experiences from both the hearing and visual bionics fields to address the main obstacles that prevent the number of electrical stimulation channels (equating to the number of frequenci ....Chip-scale implantable bionics for next generation therapeutic neural prostheses. Australia has an unmatched reputation as a world leader in neuroprostheses. Most notable of these is the bionic ear and, more recently, leading edge research towards a bionic eye. This project will combine the research strengths and experiences from both the hearing and visual bionics fields to address the main obstacles that prevent the number of electrical stimulation channels (equating to the number of frequencies heard by the deaf, and the number of spots of light seen by the blind) from increasing. The study will improve our understanding of the electrode-tissue interface, the life-long implantablity, and electrical circuitry that will allow future bionic devices to significantly improve their performance.Read moreRead less
Concentrating solar thermal energy storage using metal hydrides. This project will investigate energy storage for concentrating solar thermal energy systems. These systems can be used to efficiently generate electricity in remote locations, day and night, using solar energy. The solar energy is converted to heat energy and then chemical energy stored in a metal-hydrogen compound.
Non-destructive characterisation of residual stresses for the silicon-on-sapphire technology. Every sapphire wafer for the fabrication of integrated circuits using the silicon-on-sapphire technology is worth more than a thousand dollars, and the cost grows exponentially with successive processing of circuitry. Early detection and prevention of wafer failure is therefore an economic and quality necessity. The fast, non-destructive method to be developed by the proposed research will enable semic ....Non-destructive characterisation of residual stresses for the silicon-on-sapphire technology. Every sapphire wafer for the fabrication of integrated circuits using the silicon-on-sapphire technology is worth more than a thousand dollars, and the cost grows exponentially with successive processing of circuitry. Early detection and prevention of wafer failure is therefore an economic and quality necessity. The fast, non-destructive method to be developed by the proposed research will enable semiconductor electronics manufacturers to achieve a cost-effective fabrication of integrated circuits by detecting damages in wafers at the very early stage of production.Read moreRead less
Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable ....Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable waste for the manufacture of improved FC products. The successful outcomes of the project could allow a new range of cost-effective building products which need less energy for their manufacture, to be realised for both developed and developing countries.Read moreRead less
PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of tit ....PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of titania for photo-electrochemical devices for hydrogen generation and water decontamination. Innovation: processing of titania with reduced band-gap to be achieved through optimised oxygen nonstoichiometry. Outcome: processing technology of titania with outstanding photo-sensitivity.Read moreRead less
AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme envir ....AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme environment applications, and new methods to increase the 3D printability of brittle materials. This should provide significant benefits to aerospace and defense industries through solving their long standing bottleneck material and processing problems. The outcomes also enhance Australia’s manufacturing capacity.Read moreRead less
New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expe ....New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expensive since it requires melting by fuse-casting and high-purity raw materials. The project aims to eliminate both requirements by sintering and use of waste fly ash, giving microstructures of dense, direct-bonded, percolated, mullite, single crystals, with residual impurities in the interstices that do not affect creep.Read moreRead less
Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large depos ....Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large deposit of topaz in Torrington, NSW to be used to develop a high-value niche product (fibres) and a large-volume, low-value product (fluoride). This will provide significant economic and environmental benefits and it addresses the research priorities - Resources and Advanced Manufacturing.Read moreRead less