Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductil ....Crack Propagation within Graded Interfaces. Functionally graded interfaces are a technologically new way of joining materials in a wide range of biomedical and industrial applications. The reduction in the interfacial stresses resulting from the graded interface increases the structural integrity of the component, however, existing models do not fully address issues of plasticity and cyclic fatigue to their fracture. The intention of this study is to investigate how modifications to the ductile reinforcement phase and how the cyclic loading influence crack extension within a graded interface. These results will assist in future design and prediction of the in-service lifetime of components containing gradient interfaces.Read moreRead less
Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance ....Design Of Practical Passive Cooling Radiators Utilising Spectrally Selective Covers And Surfaces. Radiative cooling offers a means to cool buildings sustainably without complex and costly heat pumps or air conditioners. Units similar to solar panels can be designed with surfaces which radiate mostly into the 8 - 12 micron atmospheric window, which has a radiance much less than for other wavelengths. Commercial development has been limited by problems associated with the degradation, performance or cost of radiator surfaces. This project seeks to improve both performance and durability with innovative use of alternative materials and sputtered coatings suitable for mass manufacture, and to test the outdoor performance of laboratory produced radiative plates.Read moreRead less
Structures and properties of tissue engineering matrices for cartilage and bone: Imaging, visualising and modelling tissue/scaffold constructs in 3D. Tissue engineering of bone and cartilage has the potential to lower costs and improve outcomes. The first stage requires the design of porous 3D scaffolds. To date they have been found less than ideal for clinical applications. Our ability to design and optimise scaffolds has been ad hoc, as local structure and properties have not been measurable ....Structures and properties of tissue engineering matrices for cartilage and bone: Imaging, visualising and modelling tissue/scaffold constructs in 3D. Tissue engineering of bone and cartilage has the potential to lower costs and improve outcomes. The first stage requires the design of porous 3D scaffolds. To date they have been found less than ideal for clinical applications. Our ability to design and optimise scaffolds has been ad hoc, as local structure and properties have not been measurable during tissue growth and repair. In this proposal, an interdisciplinary group from three universities will utilise microCT imaging, visualisation and numerical modelling to determine these structures and properties. This will provide an invaluable understanding for the further development of tissue engineering scaffolds.Read moreRead less
De-consolidation and Re-consolidation of Advanced Thermoplastic Matrix Composites. The project provides a comprehensive physical understanding on thermal de-consolidation and re-consolidation processes in advanced thermoplastic composites during re-heating/cooling processes, such as thermoforming and joining. Mechanistic models based on theoretical analysis, experimental studies and computational modelling will be established to provide a unified approach to predict de-consolidation and re-conso ....De-consolidation and Re-consolidation of Advanced Thermoplastic Matrix Composites. The project provides a comprehensive physical understanding on thermal de-consolidation and re-consolidation processes in advanced thermoplastic composites during re-heating/cooling processes, such as thermoforming and joining. Mechanistic models based on theoretical analysis, experimental studies and computational modelling will be established to provide a unified approach to predict de-consolidation and re-consolidation processes. Optimum processing-windows will be established, with which the undesired deterioration in material meso-structures and mechanical performance due to de-consolidation is effectively minimised. The outcomes of the project will fill the gap in the knowledge for thermoplastic composite processing and will improve the integrity of thermoplastic composite structures in practical applications.Read moreRead less
Development of high-temperature superconducting coated conductors by pulsed-laser deposition technique for future long-length applications. The aim of the project is to develop a novel technology for manufacturing flexible coated conductors with the help of a pulsed laser deposition technique, in order to enhance the current-carrying ability of high-temperature superconducting coatings (including multi-layered coatings) for future long-length high power applications. To achieve desirable electr ....Development of high-temperature superconducting coated conductors by pulsed-laser deposition technique for future long-length applications. The aim of the project is to develop a novel technology for manufacturing flexible coated conductors with the help of a pulsed laser deposition technique, in order to enhance the current-carrying ability of high-temperature superconducting coatings (including multi-layered coatings) for future long-length high power applications. To achieve desirable electromagnetic properties governed by the nano-structures of the coatings, a well-balanced combination of world-class "global" and "local" electromagnetic property measurements with advanced structural characterisations is suggested. It is expected that a controlled network of nano-scale pinning centres will allow the development of high performance coated conductors.Read moreRead less
On-line structural integrity assessment of advanced composite airframe with senor network. The project addresses frontier technologies that lead to solutions to one of the critical key issues forming the Australian community - online integrity/safety assessment of structures or asset including aircraft, ships, buildings and bridges. The community benefits significantly if potential disaster due to occurrence of damage associated with those structures can be prevented - the ultimate aim of resear ....On-line structural integrity assessment of advanced composite airframe with senor network. The project addresses frontier technologies that lead to solutions to one of the critical key issues forming the Australian community - online integrity/safety assessment of structures or asset including aircraft, ships, buildings and bridges. The community benefits significantly if potential disaster due to occurrence of damage associated with those structures can be prevented - the ultimate aim of researchers for decades. It is imperative that Australian industries remain technologically ahead of international competitors. Outcomes of the project will lead to novel technologies for real-time structural health monitoring and integrity assessment, bringing significant improvement in operation safety and driving down maintenance cost.Read moreRead less
Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transfo ....Some Outstanding Mechanics Problems in Layered Ferroelectromagnetic Composites with Enhanced Magnetoelectric Effect. The proposed research has high impact on both science and technology of ferroelectromagnetic materials. The outcomes will expand Australia's knowledge base and research capability in this emerging field. Relevant industries, such as smart materials and devices, can benefit from the results of this project. The theoretical, experimental and numerical results can be directly transformed to design and application guidelines for the materials engineers and scientists to develop innovative and structurally/functionally reliable ferroelectromagnetic composites and their various devices and products.Read moreRead less
Online Structural Health Monitoring (SHM) System Using Active Diagnostic Sensor Network. It is imperative to remain technological leading for Australian research community. But current lack of reliable technique in structural health monitoring in Australia is considerably impeding her competition with other developed countries in areas of forefront technology. Outcomes of the project will lead to an online structural health monitoring system incorporated with active diagnostic sensor network, re ....Online Structural Health Monitoring (SHM) System Using Active Diagnostic Sensor Network. It is imperative to remain technological leading for Australian research community. But current lack of reliable technique in structural health monitoring in Australia is considerably impeding her competition with other developed countries in areas of forefront technology. Outcomes of the project will lead to an online structural health monitoring system incorporated with active diagnostic sensor network, related software and hardware, novel signal processing technique, and artificial intelligence algorithm-based damage identification scheme. Its successful applications in various industries, e.g. aerospace, maritime and civil, are expected to bring significant improvement in operation safety and great benefit in reducing maintenance cost.Read moreRead less
Fabrication of high quality MgB2 superconductor. Superconductors are electrical resistance free materials. They have great potential for power applications. Nowadays, superconductors have been used in applications such as Magnetic Resonance Imaging and other R&D equipment. This project deals with newly discovered MgB2 superconductor. The process outlined in this project will produce MgB2 superconductor with better superconducting properties. The application of MgB2 superconductor will save ene ....Fabrication of high quality MgB2 superconductor. Superconductors are electrical resistance free materials. They have great potential for power applications. Nowadays, superconductors have been used in applications such as Magnetic Resonance Imaging and other R&D equipment. This project deals with newly discovered MgB2 superconductor. The process outlined in this project will produce MgB2 superconductor with better superconducting properties. The application of MgB2 superconductor will save energy, and enhance the performance of existing electrical devices such as magnet and power line.Read moreRead less
New directions to miniaturized power sources: Integrated all-solid-state rechargeable batteries. This project will lead to the development of safe integrated all-solid-state miniaturized lithium ion batteries for small autonomous devices, such as implantable medical devices, hearing aids, small autonomous devices with sensing and actuation, and for communications and rapid chemical/biological analysis. This will make a significant contribution to the nation in the areas of science, technology, h ....New directions to miniaturized power sources: Integrated all-solid-state rechargeable batteries. This project will lead to the development of safe integrated all-solid-state miniaturized lithium ion batteries for small autonomous devices, such as implantable medical devices, hearing aids, small autonomous devices with sensing and actuation, and for communications and rapid chemical/biological analysis. This will make a significant contribution to the nation in the areas of science, technology, health, and the economy. The development of new scientific knowledge related to this project will place Australia at the forefront of an emerging domain of research. The project will also provide excellent training for postgraduate students and young researchers to develop their skills in chemistry, materials science, and battery technology.Read moreRead less