2D oxide supported single-atom catalysts for sustainable fuel generation. This project aims to develop two-dimensional oxide supported single-atom catalysts for sustainable fuel generation from water and CO2 using combined theoretical and experimental investigations. The outcomes of this project will offer atomic and electronic level principles in designing high-performance catalysts and provide novel approaches on green fuel generations for emerging energy technologies. The success of this proj ....2D oxide supported single-atom catalysts for sustainable fuel generation. This project aims to develop two-dimensional oxide supported single-atom catalysts for sustainable fuel generation from water and CO2 using combined theoretical and experimental investigations. The outcomes of this project will offer atomic and electronic level principles in designing high-performance catalysts and provide novel approaches on green fuel generations for emerging energy technologies. The success of this project will meet the knowledge gap between advanced materials and practical sustainable energy technologies, and contribute to the development of sustainable society of Australia and international community by supplying low-cost and green fuels.Read moreRead less
Mid-Career Industry Fellowships - Grant ID: IM230100132
Funder
Australian Research Council
Funding Amount
$1,060,944.00
Summary
Novel minerals and mix design in low embodied carbon concrete products . Research and development in materials and mix design for concrete building products will target utilisation of abundant and low cost mineral materials including natural clay, hard rock quarry fines and unclassified fly ash resources. New mix design and preparation methods are targeting improved strength and production efficiency with reduced Portland cement and embodied carbon. This technology will be used in the manufactur ....Novel minerals and mix design in low embodied carbon concrete products . Research and development in materials and mix design for concrete building products will target utilisation of abundant and low cost mineral materials including natural clay, hard rock quarry fines and unclassified fly ash resources. New mix design and preparation methods are targeting improved strength and production efficiency with reduced Portland cement and embodied carbon. This technology will be used in the manufacture of concrete blocks, roof tiles and brick and block mortar products currently manufactured by Brickworks. Outcomes are efficient and sustainable full scale manufacture of higher value, low embodied carbon, lightweight, large format and/or high durability products that are not currently available to the Australian market.Read moreRead less
Hybrid Toughening of Carbon Fibre Composites for Liquid Hydrogen Storage. This project aims to develop hybrid toughening technologies to overcome the major problem of transverse matrix cracking and splitting in existing carbon fibre composites when subjected to thermal-mechanical loading at the ultracold liquid hydrogen temperature. Nano-toughened thin-ply carbon fibre layers will be hybridised with standard-ply laminates to sustain internal pressure and external impact loading at cryogenic temp ....Hybrid Toughening of Carbon Fibre Composites for Liquid Hydrogen Storage. This project aims to develop hybrid toughening technologies to overcome the major problem of transverse matrix cracking and splitting in existing carbon fibre composites when subjected to thermal-mechanical loading at the ultracold liquid hydrogen temperature. Nano-toughened thin-ply carbon fibre layers will be hybridised with standard-ply laminates to sustain internal pressure and external impact loading at cryogenic temperatures without leaks. The hybrid composites are expected to enable Australian companies to engineer, manufacture and export lightweight carbon fibre tanks for storing and exporting liquid hydrogen, which is emerging as a transformational opportunity for Australia to become a global supplier of green energy.Read moreRead less
All-Solid-state Sodium-ion Batteries for Renewable Energy Industry. Sodium-ion batteries have been widely recognised as scalable and sustainable system for renewable energy storage and conversion owing to abundant resource of sodium and low cost. However, the electrochemical performance and safety of this technology must be improved for practical deployment. This project aims to rationally design and synthesise solid-state polymer electrolytes with high sodium ion conductivity and high sodium io ....All-Solid-state Sodium-ion Batteries for Renewable Energy Industry. Sodium-ion batteries have been widely recognised as scalable and sustainable system for renewable energy storage and conversion owing to abundant resource of sodium and low cost. However, the electrochemical performance and safety of this technology must be improved for practical deployment. This project aims to rationally design and synthesise solid-state polymer electrolytes with high sodium ion conductivity and high sodium ion transfer number. The expected outcome of the project is to manufacture all-solid-state sodium-ion batteries for renewable energy industry in Australia. The project will support the transition of energy supply to renewables, and therefore attain a secure and reliable zero-carbon emission energy future. Read moreRead less
Early Career Industry Fellowships - Grant ID: IE230100476
Funder
Australian Research Council
Funding Amount
$465,237.00
Summary
Development of rapid-response thermal batteries for the global market. In collaboration with Isothermix, this project aims to develop and commercialize cost-effective, rapid-response thermal batteries to meet the air conditioning peak demand of buildings. This project expects to generate new knowledge about the phase change materials which can be used to store thermal energy across a range of temperatures and the highly thermal conductive materials which can be used as a heat exchanger. Expected ....Development of rapid-response thermal batteries for the global market. In collaboration with Isothermix, this project aims to develop and commercialize cost-effective, rapid-response thermal batteries to meet the air conditioning peak demand of buildings. This project expects to generate new knowledge about the phase change materials which can be used to store thermal energy across a range of temperatures and the highly thermal conductive materials which can be used as a heat exchanger. Expected outcomes include the development of rapid response thermal batteries which can cool buildings across a range of temperatures and site conditions. This should provide significant benefits by reducing primary heating and cooling plant capacity and thereby our reliance on fossil fuels.Read moreRead less
High-Performance and Evaporative Triboelectric Nanogenerators. This project aims to create high performance triboelectric nanogenerators (TENGs) with outstanding moisture wicking and thermal-moisture stability, while providing a comfortable platform for biomechanical energy harvesting and self-powered sensing. The project expects to generate new knowledge on simultaneous enhancement of output power and moisture management capability of tribo-textiles using interdisciplinary approaches. This shou ....High-Performance and Evaporative Triboelectric Nanogenerators. This project aims to create high performance triboelectric nanogenerators (TENGs) with outstanding moisture wicking and thermal-moisture stability, while providing a comfortable platform for biomechanical energy harvesting and self-powered sensing. The project expects to generate new knowledge on simultaneous enhancement of output power and moisture management capability of tribo-textiles using interdisciplinary approaches. This should overcome the bottleneck of output deterioration of TENGs under humid conditions and provide significant benefits by offering an attractive renewable energy source for driving low power sensors in the era of IoT and opening new opportunities in healthcare, sports, virtual reality and smart homes.
Read moreRead less
Silicon-based Anode Materials for Next Generation Lithium-ion Batteries. This project aims to develop low-cost high-performance silicon-based anode materials for next generation high-energy lithium-ion batteries. A cutting-edge in situ reduction and encapsulation technique will be developed to synthesise sub-nanometer silicon nanoparticles homogeneously embedded in graphite matrix. The newly developed silicon-based anode material is expected to deliver high specific capacity and long cycle life. ....Silicon-based Anode Materials for Next Generation Lithium-ion Batteries. This project aims to develop low-cost high-performance silicon-based anode materials for next generation high-energy lithium-ion batteries. A cutting-edge in situ reduction and encapsulation technique will be developed to synthesise sub-nanometer silicon nanoparticles homogeneously embedded in graphite matrix. The newly developed silicon-based anode material is expected to deliver high specific capacity and long cycle life. The novel silicon-based anode materials will boost the energy density of next generation lithium-ion batteries, which will be used to power electric vehicles and renewable energy storage. This project will benefit the industry partner to launch commercial production of silicon-based anode materials for global market. Read moreRead less
Novel Membranes for High-performance Zinc-Iron Redox Flow Batteries. Membrane is a critical component in zinc-iron redox flow battery (ZIRFB) which is considered a promising technology for large-scale energy storage in the future. This project aims to design and construct high performance membranes using low-cost polymers and nanostructured carbon materials through functionalization and innovative membrane structure design. The goal is to develop cost-effective membranes that possess high ion-se ....Novel Membranes for High-performance Zinc-Iron Redox Flow Batteries. Membrane is a critical component in zinc-iron redox flow battery (ZIRFB) which is considered a promising technology for large-scale energy storage in the future. This project aims to design and construct high performance membranes using low-cost polymers and nanostructured carbon materials through functionalization and innovative membrane structure design. The goal is to develop cost-effective membranes that possess high ion-selectivity and ion conductivity as well as stability that are required to fabricate high performance, long cycle lifetime ZIRFB. Successful achievement of the outcomes will enable cost-effective, reliable ZIRFB, placing Australia at the forefront of exploiting flow batteries based clean energy storage technologies. Read moreRead less
High entropy metal organic frameworks for sustainable hydrogen production. The ultimate critical core for green hydrogen fuel generation is efficient and cost-effective catalysts. This project aims to design novel high entropy metal organic frameworks (HE-MOFs) using advanced high throughput computational screening integrated with experimental validation for sustainable hydrogen production. The outcome of this project will discover a new class of HE-MOFs materials with superior hydrogen generati ....High entropy metal organic frameworks for sustainable hydrogen production. The ultimate critical core for green hydrogen fuel generation is efficient and cost-effective catalysts. This project aims to design novel high entropy metal organic frameworks (HE-MOFs) using advanced high throughput computational screening integrated with experimental validation for sustainable hydrogen production. The outcome of this project will discover a new class of HE-MOFs materials with superior hydrogen generation efficiency, while also provide rational design principles for the exploration of high-efficient catalysts in sustainable fuel generation. The success of this project will help to achieve the zero-carbon target and contribute to the development of a sustainable society with low-cost and renewable energy supply.Read moreRead less