Nanoscale electrochemical imaging of catalyst inks for water oxidation. This project aims to reduce the cost of current water splitting technology by making new catalysts from earth abundant materials that will ensure a sustainable technological solution for the storage of renewable energy. This technology is an excellent solution to storing energy from intermittent renewable energy sources such as solar as it generates hydrogen which is a clean fuel. Using new techniques that can image the cata ....Nanoscale electrochemical imaging of catalyst inks for water oxidation. This project aims to reduce the cost of current water splitting technology by making new catalysts from earth abundant materials that will ensure a sustainable technological solution for the storage of renewable energy. This technology is an excellent solution to storing energy from intermittent renewable energy sources such as solar as it generates hydrogen which is a clean fuel. Using new techniques that can image the catalyst at the nanoscale while it is operating is expected to provide the knowledge for developing the next generation of water splitting electrolysers that can be utilised by households and businesses for storing solar or wind energy.Read moreRead less
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
New biosensing strategies based on bipolar electrochemiluminescence. Chemical analysis is a vital activity in our society, which is to a large extent confined to scientific laboratories and carried out with complex instrumentation. The breakthrough technology envisioned in this proposal will pave the way for simple, low-cost tests which can be used by non-scientists. The development of small, portable sensors for applications ranging from pollution monitoring to health testing, will enable ordi ....New biosensing strategies based on bipolar electrochemiluminescence. Chemical analysis is a vital activity in our society, which is to a large extent confined to scientific laboratories and carried out with complex instrumentation. The breakthrough technology envisioned in this proposal will pave the way for simple, low-cost tests which can be used by non-scientists. The development of small, portable sensors for applications ranging from pollution monitoring to health testing, will enable ordinary people to gain knowledge about the concentrations of molecular compounds in their environments and in themselves. This will stimulate economic and social benefits related to environmental testing and early disease diagnosis and generate new commercial opportunities for the Australian biotechnology industry.Read moreRead less
Functionalising sustainable natural binders for energy storage devices. This project aims to produce low-cost energy storage devices to meet the energy demands and safety requirements of electric appliances, electric vehicles and smart electricity grids. High-cost and non-regenerable resources and existing energy storage devices’ safety issues have hindered the electrification of portable electronic devices and vehicles and use of intermittent solar and wind energy. This project will use sustain ....Functionalising sustainable natural binders for energy storage devices. This project aims to produce low-cost energy storage devices to meet the energy demands and safety requirements of electric appliances, electric vehicles and smart electricity grids. High-cost and non-regenerable resources and existing energy storage devices’ safety issues have hindered the electrification of portable electronic devices and vehicles and use of intermittent solar and wind energy. This project will use sustainable natural polymers to develop green electrode technologies for manufacturing batteries with greatly reduced production and environmental cost. The in-depth understandings from the combination of experiments and computation simulations will help create strategies to realise low cost, long-life and safe batteries.Read moreRead less
Designing New Visible-light Active Photocatalysts for Efficient CO2 Reduction. The increasing concern over Climate Change has triggered great efforts in developing new CO2 capture technologies. The outcomes of this program will lead to a new class of photocatalysts that underpin the development of economical CO2 reduction for clean fuel production using sunlight. Such technologies will speed up the transition of Australian environmental and energy industries from fossil fuel economy to renewable ....Designing New Visible-light Active Photocatalysts for Efficient CO2 Reduction. The increasing concern over Climate Change has triggered great efforts in developing new CO2 capture technologies. The outcomes of this program will lead to a new class of photocatalysts that underpin the development of economical CO2 reduction for clean fuel production using sunlight. Such technologies will speed up the transition of Australian environmental and energy industries from fossil fuel economy to renewable energy economy. The research program will contribute significantly to knowledge advancement in nanomaterials, surface chemistry, and photochemistry, and falls in the National Research Priority Area of 'Environmentally Sustainable Australia' addressing the key goals of Climate Change and low emission energy supply.Read moreRead less
Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes in ....Two-dimensional nanoporous structured high performance gas evolution electrocatalysts. This project aims to develop nano-catalysts with high catalytic activity and rapid gas detachment properties for efficient fuel gas production. Heterogeneous electrocatalytic gas evolution reactions are important for clean energy generation and storage technologies, but high overpotentials caused by slow gaseous products’ detachment from catalyst surface severely hinder their efficiencies. Expected outcomes include insights into gas bubble formation and evolution during electrocatalysis, effective catalyst structures to mitigate negative effects of gas bubble formation, and improved catalytic efficiency of gas evolution reactions and develop high performance electrocatalysts for fuel gas production.Read moreRead less
Short circuiting redox enzymes. Enzymes that catalyse oxidation or reduction reactions can be integrated with an electrode in the development of biosensors. A key challenge is enabling an electrical current between the enzyme and the electrode and this project aims to probe this phenomenon to provide an enzyme system that operates with greater efficiency than in nature.
Biotransformation and biodegradation of organic nitrogen compounds from wastewater in bio-electrochemical systems. The rapid emergence of water recycling in Australia requires more vigilant control of pollutants that are discharged to sewers. This project will develop a novel, cost-effective process to remove organic nitrogen compounds (and likely other organics) present in many industrial wastewaters. It could provide an excellent solution for the pre-treatment of such industrial wastewaters at ....Biotransformation and biodegradation of organic nitrogen compounds from wastewater in bio-electrochemical systems. The rapid emergence of water recycling in Australia requires more vigilant control of pollutants that are discharged to sewers. This project will develop a novel, cost-effective process to remove organic nitrogen compounds (and likely other organics) present in many industrial wastewaters. It could provide an excellent solution for the pre-treatment of such industrial wastewaters at the source without any chemical addition, hence reducing the challenge and risks facing the water recycling plants. This innovative technology will further expand the growing research capacity and know-how in water recycling in Australia.Read moreRead less
Sodium ion interactions with biomass-derived hard carbon electrodes. This project aims to investigate sodium ion behavior when electrochemically interacting with hard carbon electrode materials by using both in-situ and ex-situ techniques in combination with advanced computational methods. This project expects to generate new knowledge and establish structure-property-performance correlations, thus providing guidelines and strategies for synthesising cost-effective electrode materials from bioma ....Sodium ion interactions with biomass-derived hard carbon electrodes. This project aims to investigate sodium ion behavior when electrochemically interacting with hard carbon electrode materials by using both in-situ and ex-situ techniques in combination with advanced computational methods. This project expects to generate new knowledge and establish structure-property-performance correlations, thus providing guidelines and strategies for synthesising cost-effective electrode materials from biomass for developing sustainable sodium-ion batteries. The intended outcome of this project includes knowledge advancement, enhanced capability to build international collaborations, training of early career researchers and students, and positioning Australia on the world map as a world-leading nation in energy storage.Read moreRead less
Novel Graphitic Mesoporous Carbon Materials for Next Generation Carbon Catalyst Supports and Carbon Electrodes. This project will bring about direct application benefits in terms of disclosing novel graphitic mesoporous carbons with high accessible surface area and graphitic framework as catalyst supports and electrode materials. This would lead to advanced processes important to the Australian energy and environmental industries, such as electrical double layer capacitors, greenhouse reduction ....Novel Graphitic Mesoporous Carbon Materials for Next Generation Carbon Catalyst Supports and Carbon Electrodes. This project will bring about direct application benefits in terms of disclosing novel graphitic mesoporous carbons with high accessible surface area and graphitic framework as catalyst supports and electrode materials. This would lead to advanced processes important to the Australian energy and environmental industries, such as electrical double layer capacitors, greenhouse reduction by hydrogen fuel, and hydrodesulfurization of diesel fuels. The techniques and synthesis strategies developed in this project are also applicable to creating other graphitic mesoporsous carbons important to advanced sensors, fuel cells and optoelectronic applications. Read moreRead less