Lithium-air battery: a green energy source for the sustainable future. Electrification of vehicles and the implementation of smart electric grids can dramatically reduce greenhouse gas emissions and realise sustainable development. Lithium-air batteries have the highest energy density among all battery systems and are therefore a promising power source for electric vehicles and stationary energy storage.
New Methods to Harvest Light: Towards Better Dye-Sensitized Solar Cells. Dye-sensitized solar cell (DSC) technology has emerged as a complementary energy source to silicon photovoltaic technology. The efficiency of the DSC relies heavily on sensitizing molecules to absorb solar photons and then transfer electrons to a semi-conducting particle. This project will investigate new sensitizing methods using a combination of different dyes which work cooperatively to absorb a large part of the solar ....New Methods to Harvest Light: Towards Better Dye-Sensitized Solar Cells. Dye-sensitized solar cell (DSC) technology has emerged as a complementary energy source to silicon photovoltaic technology. The efficiency of the DSC relies heavily on sensitizing molecules to absorb solar photons and then transfer electrons to a semi-conducting particle. This project will investigate new sensitizing methods using a combination of different dyes which work cooperatively to absorb a large part of the solar spectrum and efficiently inject electrons into a semi-conducting particles. The development and understanding of these new methods to sensitize the dye-sensitized solar cell should lead to new and better solar cells.Read moreRead less
Nanoscale electrochemical imaging of catalyst inks for water oxidation. This project aims to reduce the cost of current water splitting technology by making new catalysts from earth abundant materials that will ensure a sustainable technological solution for the storage of renewable energy. This technology is an excellent solution to storing energy from intermittent renewable energy sources such as solar as it generates hydrogen which is a clean fuel. Using new techniques that can image the cata ....Nanoscale electrochemical imaging of catalyst inks for water oxidation. This project aims to reduce the cost of current water splitting technology by making new catalysts from earth abundant materials that will ensure a sustainable technological solution for the storage of renewable energy. This technology is an excellent solution to storing energy from intermittent renewable energy sources such as solar as it generates hydrogen which is a clean fuel. Using new techniques that can image the catalyst at the nanoscale while it is operating is expected to provide the knowledge for developing the next generation of water splitting electrolysers that can be utilised by households and businesses for storing solar or wind energy.Read moreRead less
Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful ....Hybrid cathode for low temperature solid oxide fuel cells. This project aims to develop molten carbonate-perovskite hybrid cathode materials for low temperature solid oxide fuel cells (LT-SOFCs) possessing both high catalytic activity towards oxygen reduction reaction (ORR) and high tolerance to carbon dioxide poisoning. Carbon dioxide in air can poison nearly all the perovskite cathode materials developed for LT-SOFCs (below 600 degrees C) so far. These materials will not be practically useful until carbon dioxide poisoning can be prevented. This project expects to make these LT-SOFC cathode materials commercially viable, solving a problem for the widespread use of low temperature solid oxide fuel cells.Read moreRead less
New biosensing strategies based on bipolar electrochemiluminescence. Chemical analysis is a vital activity in our society, which is to a large extent confined to scientific laboratories and carried out with complex instrumentation. The breakthrough technology envisioned in this proposal will pave the way for simple, low-cost tests which can be used by non-scientists. The development of small, portable sensors for applications ranging from pollution monitoring to health testing, will enable ordi ....New biosensing strategies based on bipolar electrochemiluminescence. Chemical analysis is a vital activity in our society, which is to a large extent confined to scientific laboratories and carried out with complex instrumentation. The breakthrough technology envisioned in this proposal will pave the way for simple, low-cost tests which can be used by non-scientists. The development of small, portable sensors for applications ranging from pollution monitoring to health testing, will enable ordinary people to gain knowledge about the concentrations of molecular compounds in their environments and in themselves. This will stimulate economic and social benefits related to environmental testing and early disease diagnosis and generate new commercial opportunities for the Australian biotechnology industry.Read moreRead less
Light Activated Electrochemistry: Microelectrode Arrays with just one wire. Electrochemistry requires each electrode to be connected to the external circuit by a wire. With many electrodes this means many wires. Wires limit electrode density in arrays and dictate that the electrode architecture must be predetermined. This project aims to remove the need for a wire for each electrode by using light to sequentially connect each electrode to a single wire. This will be achieved using modified silic ....Light Activated Electrochemistry: Microelectrode Arrays with just one wire. Electrochemistry requires each electrode to be connected to the external circuit by a wire. With many electrodes this means many wires. Wires limit electrode density in arrays and dictate that the electrode architecture must be predetermined. This project aims to remove the need for a wire for each electrode by using light to sequentially connect each electrode to a single wire. This will be achieved using modified silicon electrodes where irradiating with light causes an increase in conductivity at the illumination spot. The project will explore the variables that influence the spatial resolution and apply the ideas to making soft connects for nanoelectronics and making high density electrode arrays for electroanalysis.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE240101045
Funder
Australian Research Council
Funding Amount
$448,407.00
Summary
Bioinspired 2D nanocatalysts for inorganic nitrogen cycle. This project aims to develop novel catalysts for high-efficient nitrogen fixation by learning from the natural enzymes, which can convert nitrogen or nitrate into reactive ammonia at very mild conditions. It is expected that the enzyme-mimicking catalysts possessing the nitrogen active sites similar with the natural enzymes will allow the effective fixation of nitrogen from both the atmosphere and the nitrogen excessively fertilized envi ....Bioinspired 2D nanocatalysts for inorganic nitrogen cycle. This project aims to develop novel catalysts for high-efficient nitrogen fixation by learning from the natural enzymes, which can convert nitrogen or nitrate into reactive ammonia at very mild conditions. It is expected that the enzyme-mimicking catalysts possessing the nitrogen active sites similar with the natural enzymes will allow the effective fixation of nitrogen from both the atmosphere and the nitrogen excessively fertilized environment into reusable ammonia. The outcomes of this project will provide a sustainable approach to solve the issues in current unbalanced inorganic nitrogen cycle in the world and contribute to a green artificial nitrogen cycle while with minimized environmental impact.Read moreRead less
Carbon-based electrode materials for electrochemical energy storage and water desalination. Clean energy and water resource are two critical issues for an environmentally sustainable Australia. The research project will lead to the discovery of innovative carbon-based electrode materials with well-designed physical and chemical properties for clean energy storage and alternative water desalination technology.
Phosphonium ionic liquids for advanced lithium energy storage systems. This project will develop, along with a leading manufacturer in the world, high performance electrolytes for lithium batteries. The technologies and expertise generated will be of importance to many niche industries in Australia in their shift towards lower carbon operations.
Surface modification of semiconducting organic charge transfer complexes with metal nanoparticles to create a new class of multifunctional materials. This project aims to deliver a facile and cheap method to produce a class of nanostructured composite materials to be used in applications which will have environmental and social benefits such as photocatalyst development for water purification, biosensing and the creation of antibacterial fabrics to prevent the spread of infection.