Discovery Early Career Researcher Award - Grant ID: DE130101046
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Ecotoxicology-on-a-chip: towards smart devices in environmental biomonitoring. High-throughput water quality monitoring is of great importance to the wellbeing of Australian society. The project will address this issue by developing new economical miniaturised biocybernetic instrumentation, designed for use by non-specialists and thus applicable for governmental, industrial and community projects.
Silicon-germanium-carbon - a novel opto-mechanic material for optical micro-electromechanical systems. Evolving from past black-and-white images, through present red-green-blue multi-spectral capability, future remote imaging systems promise spectroscopic functionality across much broader wavelength ranges in a low-cost system. However, the high cost of multiple materials and technologies for each specific spectral band limits them to high-cost industry sectors. This project proposes a simple, l ....Silicon-germanium-carbon - a novel opto-mechanic material for optical micro-electromechanical systems. Evolving from past black-and-white images, through present red-green-blue multi-spectral capability, future remote imaging systems promise spectroscopic functionality across much broader wavelength ranges in a low-cost system. However, the high cost of multiple materials and technologies for each specific spectral band limits them to high-cost industry sectors. This project proposes a simple, low-cost, single material technology based on silicon-germanium-carbon thin films for mechanical and optical applications from ultraviolet to long-wave infrared, enabling widespread application of spectroscopic imaging to multiple fields extending from climate change research, through resource exploration, to cancer detection, and aerospace/defense.Read moreRead less
Adaptive multispectral imaging system for remote sensing applications. The many applications of remote sensing include environmental/crop monitoring, oil/mineral exploration, and aerospace/defence. However, remote sensing stands to benefit greatly from infrared spectral imaging devices. This project will develop the technology for an infrared spectral imaging system, suitable for numerous remote sensing applications.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100228
Funder
Australian Research Council
Funding Amount
$400,000.00
Summary
Low Temperature Co-fired Ceramic Device Fabrication Facility. Low temperature co-fired ceramic device fabrication facility:
This project seeks to establish a low temperature co-fired ceramics fabrication facility. New kinds of ‘meso-scale’ structurable ceramic processes are filling the technological and dimensional gap between microsystems in silicon and macro microsystems, as the platform can now structure microdevices in the range from a few micrometres to millimetres. This facility would pro ....Low Temperature Co-fired Ceramic Device Fabrication Facility. Low temperature co-fired ceramic device fabrication facility:
This project seeks to establish a low temperature co-fired ceramics fabrication facility. New kinds of ‘meso-scale’ structurable ceramic processes are filling the technological and dimensional gap between microsystems in silicon and macro microsystems, as the platform can now structure microdevices in the range from a few micrometres to millimetres. This facility would provide a resource for Australian researchers to create novel electronic materials and devices that will be key to achieving breakthroughs in micro/nano-technologies and telecommunications. This project expects to support cutting-edge research into multilayer ceramic microsystems such as microelectromechanical systems, wireless sensors and actuators, radio frequency and microwave devices, microfluidic packaging, interfacing and implantation of ultra-fast photoelectrons and acoustic wave devices.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140100805
Funder
Australian Research Council
Funding Amount
$395,220.00
Summary
Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light ....Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light supporting material aerographite that has a state-of-the-art ratio value of Young's modulus to cubic density. It will also develop a new inorganic nanoparticle resist with ultra-low dose. These building blocks will enhance RIPEL's throughput by four orders of magnitude. The project will contribute to making processors or solid state storage cheaper and more efficient.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100108
Funder
Australian Research Council
Funding Amount
$175,000.00
Summary
Ultra-high frequency non-contact vibrometry equipment for biomicrofluidics metrology. This equipment will enable experimental vibration measurement up to an unprecedented one billion cycles per second of motion smaller than the width of a helium atom (20 femtometres). Understanding and harnessing the phenomena unique to this regime, especially very large accelerations surpassing one billion times the acceleration of gravity, will enable the development of rapid protein crystallisation techniques ....Ultra-high frequency non-contact vibrometry equipment for biomicrofluidics metrology. This equipment will enable experimental vibration measurement up to an unprecedented one billion cycles per second of motion smaller than the width of a helium atom (20 femtometres). Understanding and harnessing the phenomena unique to this regime, especially very large accelerations surpassing one billion times the acceleration of gravity, will enable the development of rapid protein crystallisation techniques and constant-temperature organic chemical reaction enhancement for rapid development of new drugs, new devices for measuring the profile of surfaces at video speeds (videoAFM), new micro- and nano-devices for fluid pumping, mixing, colloidal separation and concentration, and new autonomous nanorobots for non-invasive microsurgery.Read moreRead less
Hetero-epitaxial silicon carbide: enabling wide-band-gap semiconductors on silicon for greener technologies. In the next decade wide band gap materials will unlock vast potential for a capillary outreach of smart heterogeneous devices, improving energy efficiency and lessening our carbon footprint. This project will aim at major breakthroughs, enabling this pressing technological demand, and putting Australia at the leading edge of this revolution.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100126
Funder
Australian Research Council
Funding Amount
$527,638.00
Summary
Advanced Maskless Photolitography for Western Australia. This project aims to close an existing gap in micro- & nano-fabrication in Western Australia and provide access to advanced maskless photolithography in support of Australian research flagships of international excellence which include advanced infrared and quantum technologies, semiconductor optoelectronics, chemical engineering, microelectromechanical systems, as well as dark matter and gravitational wave discovery. Notably, the new capa ....Advanced Maskless Photolitography for Western Australia. This project aims to close an existing gap in micro- & nano-fabrication in Western Australia and provide access to advanced maskless photolithography in support of Australian research flagships of international excellence which include advanced infrared and quantum technologies, semiconductor optoelectronics, chemical engineering, microelectromechanical systems, as well as dark matter and gravitational wave discovery. Notably, the new capability is of utmost importance for five distinct ARC Centres in multidisciplinary areas and will be available to all researchers via the WA Node of Australian National Fabrication Facility in support of high impact scientific research and to maintain strong engagement with industry and Australian economy.Read moreRead less
Integrated on-chip force and displacement sensors for high-speed atomic force microscopy of ultimate sensitivity. This project aims to develop next generation atomic force microscopy systems based on a novel interferometric method for on-chip force and displacement sensing. The proposed sensitivity improvement of two orders of magnitude over the present state-of-the-art will provide a disruptive innovation for various present and future nanotechnologies.