Effect of cane sugar juice composition on scaling rate and scale composition in sugar mills. The Australia sugar industry produces 1100 GWh of renewable electricity annually, abating ~1.1 M tonnes of CO2-equivalent of greenhouse gases. This can be increased if the juice evaporation performance, which largely determines the energy efficiency of the sugar factory, can be improved through reduced fouling of evaporators. This project will investigate the effect of juice composition on fouling of sug ....Effect of cane sugar juice composition on scaling rate and scale composition in sugar mills. The Australia sugar industry produces 1100 GWh of renewable electricity annually, abating ~1.1 M tonnes of CO2-equivalent of greenhouse gases. This can be increased if the juice evaporation performance, which largely determines the energy efficiency of the sugar factory, can be improved through reduced fouling of evaporators. This project will investigate the effect of juice composition on fouling of sugar factory evaporators so that a model to predict scale type and scale propensity can be developed. This will enable the development of better scale control strategies, resulting in reduced energy usage and reduced usage of the hazardous and polluting chemicals required to remove scale.Read moreRead less
Improved Management of Australian Port Infrastructure by Development of Predictive Ageing Simulation. Exposure of built infrastructure to corrosive marine conditions causes deterioration and reduced service life. Asset managers lack predictive models of in-service durability. Using data gathered from Australian ports, life-cycle predictions will be developed, simulating durability and incorporating geographical location, structure type, composition, and levels of maintenance. The modelling has ....Improved Management of Australian Port Infrastructure by Development of Predictive Ageing Simulation. Exposure of built infrastructure to corrosive marine conditions causes deterioration and reduced service life. Asset managers lack predictive models of in-service durability. Using data gathered from Australian ports, life-cycle predictions will be developed, simulating durability and incorporating geographical location, structure type, composition, and levels of maintenance. The modelling has not been undertaken on Australian port assets, whereas international models reflect very different infrastructure and exposures and are based on simpler 2D conditions that do not simulate actual deterioration. The three-dimensional (3D) modelling and graphics will be unique worldwide, providing decision support for construction and maintenance.Read moreRead less
Design, build and test a fault current limiter employing magnesium diboride (MgB2) superconducting coils. Recent occurrences of blackouts around the world caused immeasurable damage to electrical network hardware in the range of $10M, however, the losses from an unavailable network are much more. The CIs and Zenergy Power Pty Ltd (formerly Australian Superconductors) have been developing saturated core fault current limiters (FCL) since 1999. The first saturated core fault current limiter employ ....Design, build and test a fault current limiter employing magnesium diboride (MgB2) superconducting coils. Recent occurrences of blackouts around the world caused immeasurable damage to electrical network hardware in the range of $10M, however, the losses from an unavailable network are much more. The CIs and Zenergy Power Pty Ltd (formerly Australian Superconductors) have been developing saturated core fault current limiters (FCL) since 1999. The first saturated core fault current limiter employing the Australian's entity's technology was installed in California. The aim of this proposal is to extend this technology to demonstrate next generation FCL using a newly developed superconductor magnesium diboride (MgB2) wire which is cheaper and easier to manufacture than high temperature superconductors and the CIs' group hold strong IP on nano-scale chemically doped MgB2 wires.Read moreRead less
Multilevel converters. Until recently the vast majority of power electronic applications have been to low voltage systems. However, developments in high voltage semiconductor switches in the last decade have generated significant activity in high voltage power electronic applications.
Traditional two level converters have significant problems in high voltage applications - high output dv/dt damages insulation and motor bearings, and the semiconductor switches have high switching losses.
Mu ....Multilevel converters. Until recently the vast majority of power electronic applications have been to low voltage systems. However, developments in high voltage semiconductor switches in the last decade have generated significant activity in high voltage power electronic applications.
Traditional two level converters have significant problems in high voltage applications - high output dv/dt damages insulation and motor bearings, and the semiconductor switches have high switching losses.
Multilevel converters hold the promise of alleviating these problems. This project will research and develop multilevel converter technology for static VAR compensators and medium voltage drives, initially targeted at mining applications.Read moreRead less
Cue Acquisition as a Mediator of Cognitive Skills Development. As the Australian workforce ages and there is a consequent reduction in the availability of experienced practitioners, organisations are going to be faced with the dilemma of placing relatively inexperienced staff in positions that were once occupied by experts. The result is a potential increase in the risks to critical infrastructure, such as electricity transmission. In this project, we expect to develop a set of principles that c ....Cue Acquisition as a Mediator of Cognitive Skills Development. As the Australian workforce ages and there is a consequent reduction in the availability of experienced practitioners, organisations are going to be faced with the dilemma of placing relatively inexperienced staff in positions that were once occupied by experts. The result is a potential increase in the risks to critical infrastructure, such as electricity transmission. In this project, we expect to develop a set of principles that can ensure that scenario based training is targeted to those aspects of the situation that are most important in maintaining the integrity of the system. The outcome is not only a safer system, but one that provides a structured approach to the acquisition of skills amongst employees.Read moreRead less
Investigation of a Novel Fan. Fans are very widely used for cooling and heating, thrust and mass transport and are one of the most common fluid mechanical devices. An optimal fan design will maximise flow velocity and pressure rise for minimum energy requirements and noise production. De Rolfe has recently developed a new fan that shows considerable promise in comparison to conventional designs on single point tests.
In this project experimental and computional fluid dynamics investigations o ....Investigation of a Novel Fan. Fans are very widely used for cooling and heating, thrust and mass transport and are one of the most common fluid mechanical devices. An optimal fan design will maximise flow velocity and pressure rise for minimum energy requirements and noise production. De Rolfe has recently developed a new fan that shows considerable promise in comparison to conventional designs on single point tests.
In this project experimental and computional fluid dynamics investigations of the new fan will be carried out to determine the basic fluid mechanics and to obtain performance curves. Scaling laws will be obtained and, if possible, the fan will be further optimised.Read moreRead less
Environmental and Social Responsibility in the Small and Medium Sized Enterprise Sector: Challenges and Prospects. The proposed research addressed two of the National Research Priorities, viz., promoting an environmentally sustainable Australia (Goal 2: Transforming existing industries), and promoting and maintaining good health (Goal 4: strengthening Australia's social and economic fabric). The research findings will identify best practices in the areas of environmental and social responsibili ....Environmental and Social Responsibility in the Small and Medium Sized Enterprise Sector: Challenges and Prospects. The proposed research addressed two of the National Research Priorities, viz., promoting an environmentally sustainable Australia (Goal 2: Transforming existing industries), and promoting and maintaining good health (Goal 4: strengthening Australia's social and economic fabric). The research findings will identify best practices in the areas of environmental and social responsibility in the SME sector thus contributing to the creation of environmentally and socially sustainable workplaces. By integrating perspectives from multiple stakeholders the research also addresses community environmental and social concerns.Read moreRead less
Integration of Life Cycle Analysis, EnternE, and Economic Models to Sustainable Regional Development. This project involves the development of a novel decision-making framework to support the transition to sustainability within regions. The approach is based on integrating the methodologies of Life Cycle Analysis, externality costing and traditional economic analysis to assess the tradeoffs between economic, environmental and social outcomes. The integration of these techniques will allow the re ....Integration of Life Cycle Analysis, EnternE, and Economic Models to Sustainable Regional Development. This project involves the development of a novel decision-making framework to support the transition to sustainability within regions. The approach is based on integrating the methodologies of Life Cycle Analysis, externality costing and traditional economic analysis to assess the tradeoffs between economic, environmental and social outcomes. The integration of these techniques will allow the relative magnitude of positive and negative impacts of development decisions to be reported as an economic unit. This will allow the tradeoffs that occur between economic, environmental and social considerations to be quantified and the sustainability of a development or planning scenario to be assessed.Read moreRead less
Design and Optimisation of Novel Enthalpy Heat Exchangers. This project deals with the thermal design and optimisation of a novel type of latent energy heat exchanger. This new heat exchanger overcomes the practical implementation problems of previous latent energy heat exchangers such as heat-wheels. The main application of this innovative heat exchanger will be to improve the capacity and efficiency of air conditioning systems. As the new heat exchanger is very compact it will be ideally sui ....Design and Optimisation of Novel Enthalpy Heat Exchangers. This project deals with the thermal design and optimisation of a novel type of latent energy heat exchanger. This new heat exchanger overcomes the practical implementation problems of previous latent energy heat exchangers such as heat-wheels. The main application of this innovative heat exchanger will be to improve the capacity and efficiency of air conditioning systems. As the new heat exchanger is very compact it will be ideally suited for integration with air conditioning coils. Existing latent heat wheels are very bulky and are difficult to integrate into standard air conditioner installations.Read moreRead less
Modelling of Nitric Oxides and Carbon Monoxide Emissions from Bagasse-Fires Boilers. The project aims to develop computational models to predict emissions of nitric oxides and carbon monoxide from sugar-mill boilers burning bagasse. Bagasse combustion does not contribute to greenhouse gas emissions and clean and efficient combustion of this fuel has become very important for the sugar industry and for Australia. The project combines the opportunity of direct boiler measurements by SRI with the m ....Modelling of Nitric Oxides and Carbon Monoxide Emissions from Bagasse-Fires Boilers. The project aims to develop computational models to predict emissions of nitric oxides and carbon monoxide from sugar-mill boilers burning bagasse. Bagasse combustion does not contribute to greenhouse gas emissions and clean and efficient combustion of this fuel has become very important for the sugar industry and for Australia. The project combines the opportunity of direct boiler measurements by SRI with the modelling expertise at the University to develop combustion-kinetics models for these species. The models will be incorporated into the previously developed computational fluid dynamics - combustion code of the furnace to give the capability of emission prediction as a function of burner operating conditions and fuel parameters.Read moreRead less