Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100235
Funder
Australian Research Council
Funding Amount
$180,000.00
Summary
Interfacial mapping facility. New electronic materials and devices impact on everyday life in areas such as photovoltaics, biotechnology and healthcare. This facility will provide researchers with the unique capability of mapping both the structure and electronic properties of materials on the nanoscale. It will be an essential tool for developing new electronics based on nanotechnology.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100004
Funder
Australian Research Council
Funding Amount
$470,000.00
Summary
Thin film processing cluster: precise synthesis and nano-patterning of functional coatings. This facility will allow Australian researchers to create advanced functional materials with unprecedented control over material configurations and near atomic scale precision in dimensions. This will enable significant advances in high speed photonics and electronics, health and environment monitoring, and micro-energy sources.
High-cadence near-infrared imaging. This project aims to deploy a cryogenic camera system to improve the outputs of astronomical telescopes. The system is equipped with an emerging detector technology, a near-infrared Avalanche Photo-Diode array, capable of high cadence imaging with frame rates of 10 - 1,000 Hz at a wavelength of around 2.2 microns. This new technology is a key component to the future of adaptive optics systems for astronomical telescopes as it allows the rapid measurements nece ....High-cadence near-infrared imaging. This project aims to deploy a cryogenic camera system to improve the outputs of astronomical telescopes. The system is equipped with an emerging detector technology, a near-infrared Avalanche Photo-Diode array, capable of high cadence imaging with frame rates of 10 - 1,000 Hz at a wavelength of around 2.2 microns. This new technology is a key component to the future of adaptive optics systems for astronomical telescopes as it allows the rapid measurements necessary to correct the image blurring introduced by the Earth's atmosphere. No expertise currently exists in Australia with this new technology. Capitalising on previous investment, the camera system is intended to fill a capability gap in local expertise and to ensure the potential of the next generation of telescopes is realised and strengthen our competitive edge for frontier instrumentation across the wider Australian imaging community.Read moreRead less
A silicon-compatible light source on a silicon-on-insulator platform. Silicon is emerging as an important photonic material owing to the cheap processing methods developed for electronics. This project aims to capture key technology for integrating photonic components onto silicon. It can bring social and commercial benefits to Australia such as high-level research as well as opportunities for commercialisation.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100124
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Rapid prototyping 3-D nano-pattern large area writer . Rapid prototyping 3-D nano-pattern large area writer:
The project aims to establish a nanoscale three-dimensional patterning rapid prototyping capability to enable advanced nanofabrication research and development. The extension of patterning nanostructured materials in three dimensions with nanometre resolution, developed for semiconductor processing, to nano-electronics, nanophotonics, nanosensors, nanobiotechnology and fundamental studi ....Rapid prototyping 3-D nano-pattern large area writer . Rapid prototyping 3-D nano-pattern large area writer:
The project aims to establish a nanoscale three-dimensional patterning rapid prototyping capability to enable advanced nanofabrication research and development. The extension of patterning nanostructured materials in three dimensions with nanometre resolution, developed for semiconductor processing, to nano-electronics, nanophotonics, nanosensors, nanobiotechnology and fundamental studies of nanoscale phenomena in science and engineering has opened new opportunities in these areas. As these areas accelerate, there is a need to develop nanoscale patterns and structures via rapid prototyping pathways and with methods accessible to an ever-diverse researcher base without a background in nanofabrication. By establishing the first NanoFrazor in Australia, this project aims to provide new technology for the fabrication of high-resolution nanoscale structures and patterns.
Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140100805
Funder
Australian Research Council
Funding Amount
$395,220.00
Summary
Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light ....Radioisotope-powered Parallel Electron Lithography for High-throughput Nano-manufacturing. This project aims to realise rapid fabrication of controllable nano-devices over large areas with high throughput and low cost. The lack of large-size (greater than four inch) mask and ultra-low dose resist are the fundamental challenges for high-throughput radioisotope-powered parallel electron nano-lithography (RIPEL) systems. This project aims to realise a large-size RIPEL mask by using the ultra-light supporting material aerographite that has a state-of-the-art ratio value of Young's modulus to cubic density. It will also develop a new inorganic nanoparticle resist with ultra-low dose. These building blocks will enhance RIPEL's throughput by four orders of magnitude. The project will contribute to making processors or solid state storage cheaper and more efficient.Read moreRead less
Selective area nano-epitaxy. A new major program will be initiated to investigate the epitaxial growth of certain semiconductor nanowires on patterned substrates, without the use of a catalyst. It will result in the ability to produce nanowires of high quality and uniformity. This will lead the way for new and advanced concept nanowire-based devices for future applications.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100233
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Characterisation of infrared imaging technologies. This project aims to establish a facility for two-dimensional (2D) infrared sensor array testing and prototyping. Systematic characterisation and prototyping of 2D imaging arrays is vital in showcasing and realising Australia's innovation and research investment in photodetector technologies. This facility will enable research on 2D imaging arrays, such as pixel yield and cross-talk, device reliability physics, failure mechanisms, noise and long ....Characterisation of infrared imaging technologies. This project aims to establish a facility for two-dimensional (2D) infrared sensor array testing and prototyping. Systematic characterisation and prototyping of 2D imaging arrays is vital in showcasing and realising Australia's innovation and research investment in photodetector technologies. This facility will enable research on 2D imaging arrays, such as pixel yield and cross-talk, device reliability physics, failure mechanisms, noise and long-term stability. The facility will demonstrate Australia's innovative imaging technologies, applicable in science, industry, defence and security, attracting interest from both Australian and international industries.Read moreRead less
Exploiting deep sub-surface temperature-induced phase-transformations for an improved approach to semiconductor laser-dicing. This project aims to explore sub-surface laser-induced phase transformations in semiconductors and to exploit this novel method for ultra-fine laser cutting of semiconductor wafers without debris. The outcomes will be understanding new temperature-induced material modifications and innovative technology development relevant for the semiconductor industry.
A fundamental study of electronic transport in advanced semiconductor nanostructures. The principal aim of this project is to attract and retain very high calibre early career researchers by providing them with the best-available infrastructure and research environment, combined with world-class supervision and mentoring. The project brings together an outstanding team of international collaborators, who will work with the early career researchers to ensure that they are trained and mentored at ....A fundamental study of electronic transport in advanced semiconductor nanostructures. The principal aim of this project is to attract and retain very high calibre early career researchers by providing them with the best-available infrastructure and research environment, combined with world-class supervision and mentoring. The project brings together an outstanding team of international collaborators, who will work with the early career researchers to ensure that they are trained and mentored at an international level. The new science, novel characterisation methods, and theoretical models that are outcomes of this project will provide new opportunities and expertise to advance the strategic defence and national security interests of Australia, and the emerging Australian semiconductor device and solar cell industry. Read moreRead less