Discovery Early Career Researcher Award - Grant ID: DE190101152
Funder
Australian Research Council
Funding Amount
$404,000.00
Summary
Micro/nano-mechanical testing methodologies for interfacial adhesion. This project aims to develop reliable approaches for measuring the toughness of a variety of metal/polymer interfaces integral to contemporary flexible devices. Adhesion between metal thin film conductors and polymer substrates is a critical factor influencing the reliability of the emerging polymer-based flexible electronics. This project will develop new methodologies for understanding the behaviour of these metal/polymer in ....Micro/nano-mechanical testing methodologies for interfacial adhesion. This project aims to develop reliable approaches for measuring the toughness of a variety of metal/polymer interfaces integral to contemporary flexible devices. Adhesion between metal thin film conductors and polymer substrates is a critical factor influencing the reliability of the emerging polymer-based flexible electronics. This project will develop new methodologies for understanding the behaviour of these metal/polymer interfaces. This project will be a crucial enabler to accelerating the development of new flexible microelectronic technologies, from solar panels to electronic skin. This innovation will enable Australia to maintain an important connection to the rapidly-evolving international microelectronic industry and add significant value to Australian manufacturing industries.Read moreRead less
Bioplastics in the environment: lifetimes and toxicology. Globally, governments are implementing policies to drive a move to a circular economy. In the process, new materials are being introduced whose potential impacts need to be understood before they are widely used. This project pioneers investigations into the rate and extent of biodegradation of biodegradable plastics in aquatic and soil environments and the associated ecotoxicology of this process. In particular, it aims to quantify the e ....Bioplastics in the environment: lifetimes and toxicology. Globally, governments are implementing policies to drive a move to a circular economy. In the process, new materials are being introduced whose potential impacts need to be understood before they are widely used. This project pioneers investigations into the rate and extent of biodegradation of biodegradable plastics in aquatic and soil environments and the associated ecotoxicology of this process. In particular, it aims to quantify the extent to which the surfaces of these materials accumulate environmental pollutants via adsorption and other mechanisms. The outcomes will include conceptual models of biodegradation across environments, including lifetimes and likely impacts, critical information for framing a sustainable plastics industry.Read moreRead less
Development of nanostructured sensors for ultra-sensitive, label-free and selective detection of biological and chemical species. Outcomes will significantly advance the technical and fundamental understanding of sensor assembly and provide guidelines for developing and manufacturing nanostructured sensors, which is critical for next generation nanoscale sensing platforms for health care, medical diagnostics and chemical detection and Australia's emerging sensor industries.
Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-den ....Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-density means no chemicals in proppant transportation and application. Successful development of such high-performance proppants will significantly increase Australia oil/gas exploration and production with an environmental acceptable technology, a leap forward for the oil/gas industry in Australia and the world.Read moreRead less
Industrial Transformation Research Hubs - Grant ID: IH130100017
Funder
Australian Research Council
Funding Amount
$5,000,000.00
Summary
ARC Research Hub for Australian Steel Manufacturing. ARC Research Hub for Australian Steel Manufacturing. The aim of this Research Hub is to develop breakthrough process and product innovations to enable the Australian steel industry to improve its global competitiveness. Based on an integrated, value chain-wide approach to innovation in the steel sector the Research Hub includes projects on innovation strategy and management, customer-focused product development, innovation in coating and surfa ....ARC Research Hub for Australian Steel Manufacturing. ARC Research Hub for Australian Steel Manufacturing. The aim of this Research Hub is to develop breakthrough process and product innovations to enable the Australian steel industry to improve its global competitiveness. Based on an integrated, value chain-wide approach to innovation in the steel sector the Research Hub includes projects on innovation strategy and management, customer-focused product development, innovation in coating and surface engineering technology, and economic and environmental sustainability of iron and steelmaking.Read moreRead less
Development of next generation smart sucker rod wear guides . In a natural gas wells, sucker rod guides protect the production tubing from wear by the rod string. Premature and erratic failures are costing the industry tens of millions every year. In collaboration with two local SMEs, this project aims to develop the next generation of smart and durable wear guides. The project seeks to understand the complex three body wear mechanisms that drive guide and tubing wear, then use this knowledge to ....Development of next generation smart sucker rod wear guides . In a natural gas wells, sucker rod guides protect the production tubing from wear by the rod string. Premature and erratic failures are costing the industry tens of millions every year. In collaboration with two local SMEs, this project aims to develop the next generation of smart and durable wear guides. The project seeks to understand the complex three body wear mechanisms that drive guide and tubing wear, then use this knowledge to develop new wear resistant compounds and develop a smart guide that provides feedback on its wear state. This will enable the industry partners to supply cutting edge technology to the global oil and gas industry that not only reduces well operation cost but also enhances well resilience.Read moreRead less
Biodegradable magnesium alloy scaffolds for bone tissue engineering. This project aims to develop a class of porous, biocompatible, biofunctional and biodegradable magnesium alloy scaffolds with designed pore architecture and mechanical properties mimicking those of natural bone for tissue engineering applications. These magnesium alloy scaffolds will be biocompatible, able to bear loads, and will be gradually replaced by natural bone. The outcomes are expected to benefit the ageing population a ....Biodegradable magnesium alloy scaffolds for bone tissue engineering. This project aims to develop a class of porous, biocompatible, biofunctional and biodegradable magnesium alloy scaffolds with designed pore architecture and mechanical properties mimicking those of natural bone for tissue engineering applications. These magnesium alloy scaffolds will be biocompatible, able to bear loads, and will be gradually replaced by natural bone. The outcomes are expected to benefit the ageing population and people with bone abnormalities.Read moreRead less
Next generation flexible high current micro-electronic interconnects. The project aims to reduce the temperatures required for the manufacture of electronic circuitry through the use of low melting temperature metallic gallium-based alloys. The project will use a range of innovative techniques to generate methods that these low temperature alloys can rapidly transition from a liquid state to a solid intermetallic in short timeframes at low-temperatures. The outcomes from this project include red ....Next generation flexible high current micro-electronic interconnects. The project aims to reduce the temperatures required for the manufacture of electronic circuitry through the use of low melting temperature metallic gallium-based alloys. The project will use a range of innovative techniques to generate methods that these low temperature alloys can rapidly transition from a liquid state to a solid intermetallic in short timeframes at low-temperatures. The outcomes from this project include reduced energy costs during electronic manufacture and the development of techniques that will enable sensitive next-generation components to be assembled by removing the need to use elevated temperatures.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100156
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Advanced Laser Additive Manufacturing System for Extended Applications to Surface Engineering, Direct Manufacturing and New Alloy Development. Advanced laser additive manufacturing system for extended applications to surface engineering, direct manufacturing and new alloy development: This project will provide an advanced laser additive manufacturing system for extended applications. Although the facility was originally designed for forefront additive manufacturing, it enables innovative resear ....Advanced Laser Additive Manufacturing System for Extended Applications to Surface Engineering, Direct Manufacturing and New Alloy Development. Advanced laser additive manufacturing system for extended applications to surface engineering, direct manufacturing and new alloy development: This project will provide an advanced laser additive manufacturing system for extended applications. Although the facility was originally designed for forefront additive manufacturing, it enables innovative research on surface engineering to solve the long standing corrosion and wear problems associated with metal components and to produce biomedical coatings on titanium implants. The facility can also be used to develop high quality alloys, including titanium and magnesium alloys, through an accelerated metallurgy approach, leading to breakthrough progress in metal research. Such alloys are highly desired by automotive and aerospace industries to improve fuel efficiency through weight reduction. Read moreRead less
Towards energy-efficient lighting based on light-emitting diodes: the role of silicon carbide grown on Si Wafers. This project will investigate a potential solution to the problems of cost and quality of light-emitting diodes for solid-state lighting. The expected outcome is knowledge to underpin future development of solid-state lighting that is suitable for a wide replacement of the much less efficient and effective incandescent bulbs and fluorescent tubes.