Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100177
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Advanced electron paramagnetic resonance (EPR) facilities for chemical, biological and materials sciences. New instrumentation to advance national research in hydrogen fuel generation from renewable sources, new generation photo-voltaic technologies, novel polymer and other chemical materials and advanced computing systems will be provided by this project. A new high sensitivity electron paramagnetic resonance facility, located at the Australian National University, will serve researchers in the ....Advanced electron paramagnetic resonance (EPR) facilities for chemical, biological and materials sciences. New instrumentation to advance national research in hydrogen fuel generation from renewable sources, new generation photo-voltaic technologies, novel polymer and other chemical materials and advanced computing systems will be provided by this project. A new high sensitivity electron paramagnetic resonance facility, located at the Australian National University, will serve researchers in the ACT region devoted to the broad range of activities summarised above. A particular focus involves novel, biologically inspired energy systems and high efficiency solar cell technology.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Rechargeable lithium carbon dioxide battery - catalyst design to prototype . This project aims to develop a new concept of rechargeable lithium carbon dioxide batteries and scaled-up prototypes. Such a battery will be first of its kind to show high power comparable to gasoline and superior rechargeability over existing gas-involved batteries, ensuring realistic use for industrial purposes. Expected outcomes include 2-dimensional catalysts made from earth-abundant elements lowering large-scale pr ....Rechargeable lithium carbon dioxide battery - catalyst design to prototype . This project aims to develop a new concept of rechargeable lithium carbon dioxide batteries and scaled-up prototypes. Such a battery will be first of its kind to show high power comparable to gasoline and superior rechargeability over existing gas-involved batteries, ensuring realistic use for industrial purposes. Expected outcomes include 2-dimensional catalysts made from earth-abundant elements lowering large-scale production cost, a novel but reliable working principle based on reversible carbon dioxide/oxalate conversion, and prototypes featuring high specific capacity, large energy density and excellent durability. Via industrial pilot trials, commercial benefits will be fast tracked for energy security and carbon dioxide utilisation.Read moreRead less
Design and exploration of novel p-block materials for visible light photocatalysis. This project aims to design and explore novel visible light p-block photocatalysts through in depth surface studies of materials at an atomic level. A new strategy of band structure engineering and in-situ investigation of atomic-level photocatalytic dynamics will be the key elements in this research which is expected to yield several novel visible light photocatalysts. The outcome of the project will be the unde ....Design and exploration of novel p-block materials for visible light photocatalysis. This project aims to design and explore novel visible light p-block photocatalysts through in depth surface studies of materials at an atomic level. A new strategy of band structure engineering and in-situ investigation of atomic-level photocatalytic dynamics will be the key elements in this research which is expected to yield several novel visible light photocatalysts. The outcome of the project will be the understanding of processes and mechanisms underlying the photocatalysis and building the foundation of usable, stable, and durable visible-light photocatalytic applications.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100112
Funder
Australian Research Council
Funding Amount
$275,000.00
Summary
A Raman facility for advanced research supporting Australia’s natural gas, oil, coal and minerals industries. This modern Raman Spectroscopy facility will support the science and engineering that underpins the production and processing of Australia’s natural resources. Using high-pressure fibre optics, novel lasers and advanced imaging, the facility will enable the monitoring and improvement of processes and materials under extreme conditions.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100164
Funder
Australian Research Council
Funding Amount
$680,000.00
Summary
Dynamic phase behaviour characterisation facility for nanostructured interfaces and solids. This infrastructure will increase our understanding of interfacial phenomena of nanostructured materials over very short periods of time. This new understanding will allow optimisation of the correlation of the chemistry of a material to the properties of that material. The infrastructure will enhance Australia's capabilities in creating new materials relevant to electronics, medicine, the environment and ....Dynamic phase behaviour characterisation facility for nanostructured interfaces and solids. This infrastructure will increase our understanding of interfacial phenomena of nanostructured materials over very short periods of time. This new understanding will allow optimisation of the correlation of the chemistry of a material to the properties of that material. The infrastructure will enhance Australia's capabilities in creating new materials relevant to electronics, medicine, the environment and security technologies.Read moreRead less
Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new el ....Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in wearable electronics, significant advances in self-powered, environmentally friendly devices, and commercialisation of the technology to Australian industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100047
Funder
Australian Research Council
Funding Amount
$245,750.00
Summary
An upgraded nanoindenter facility with in-situ Raman at high temperature. This LIEF grant aims to upgrade an existing TI950 Nanoindenter with a new system that physically couples
Raman Spectroscopy system with on a shared stage that uniquely enables combined assessment of materials
with sub-micrometers or spanning millimetre-sized regions from room temperature up to 800oC. The equipment
with much enhanced features will be unique in Australia with the added Raman and a hot stage.
The combination ....An upgraded nanoindenter facility with in-situ Raman at high temperature. This LIEF grant aims to upgrade an existing TI950 Nanoindenter with a new system that physically couples
Raman Spectroscopy system with on a shared stage that uniquely enables combined assessment of materials
with sub-micrometers or spanning millimetre-sized regions from room temperature up to 800oC. The equipment
with much enhanced features will be unique in Australia with the added Raman and a hot stage.
The combination of Raman and nanoindentation allows the mechanical property to be correlated to physical
characteristics such as chemical bonds and physical state, volume fractionation of crystallinity, amorphous and
unpolymerised phases, molecular orientation, residual strain, polymer cross-linking, surface treatment effects.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100035
Funder
Australian Research Council
Funding Amount
$200,000.00
Summary
Joint processing facility for the production of far-from-equilibrium alloy structures. One of today’s research frontiers is to design materials with tailored physical, chemical and mechanical properties which would be suitable for new uses. Equipment for melt spinning and high-pressure torsion will be used to process materials to achieve novel microstructures. These will pave the way to new types of advanced materials for future applications in lightweight transport, energy technologies and biom ....Joint processing facility for the production of far-from-equilibrium alloy structures. One of today’s research frontiers is to design materials with tailored physical, chemical and mechanical properties which would be suitable for new uses. Equipment for melt spinning and high-pressure torsion will be used to process materials to achieve novel microstructures. These will pave the way to new types of advanced materials for future applications in lightweight transport, energy technologies and biomaterials.Read moreRead less