Renewable energy generation from flow-induced vibration. Much engineering effort has been expended to eliminate vibration of marine structures. This project seeks to provide the basis for the development of tidal energy harnessing, by deliberately amplifying and harnessing vibration. This technology offers the promise of capturing clean, zero-emissions energy, while presenting no risk to marine life.
Applying search theory for eradicating invasive species. Invasive species have major economic and environmental impacts in Australia and are a major cause of extinctions worldwide. Monitoring is crucial for the timely control of invasive species in sensitive environments. Early detection increases the probability of eradication and increased accuracy in detection reduces the impact of control programs on non-target species. Efficient monitoring also is crucial in determining whether eradication ....Applying search theory for eradicating invasive species. Invasive species have major economic and environmental impacts in Australia and are a major cause of extinctions worldwide. Monitoring is crucial for the timely control of invasive species in sensitive environments. Early detection increases the probability of eradication and increased accuracy in detection reduces the impact of control programs on non-target species. Efficient monitoring also is crucial in determining whether eradication has succeeded. Search Theory has been applied for over 60 years in a wide range of non-biological monitoring problems, resulting in large increases in target detection rates. Gains of a similar magnitude in invasive species detection would greatly enhance Australia's capacity to manage these threats.Read moreRead less
Automatic control systems for low-energy pipelines in irrigation networks. Automatic control systems for low-energy pipelines in irrigation networks. This project aims to design automated pipelines to distribute irrigation water from backbone open-channels to end-users. Automation can make irrigation networks more efficient, which is important for food security and the environment. Automation is expected to achieve low-energy distribution, in line with the gravity-powered operation of typical op ....Automatic control systems for low-energy pipelines in irrigation networks. Automatic control systems for low-energy pipelines in irrigation networks. This project aims to design automated pipelines to distribute irrigation water from backbone open-channels to end-users. Automation can make irrigation networks more efficient, which is important for food security and the environment. Automation is expected to achieve low-energy distribution, in line with the gravity-powered operation of typical open-channel networks. The main challenges are the development of suitable models for designing outlet-flow control systems, optimization-based outlet-flow scheduling methods for ensuring operation within hydraulic constraints, and system monitoring techniques. This project will design automatic control systems to enable low-energy water distribution from open-channels to end-users by pipes.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC220100003
Funder
Australian Research Council
Funding Amount
$4,930,205.00
Summary
ARC Training Centre for Biofilm Research and Innovation . The ARC Training Centre for Biofilm Research and Innovation aims to transform biofouling management strategies for maritime platforms by building on local and international expertise to mentor and train the next generation of interdisciplinary scientists and engineers. Anticipating evolving regulatory stringency, this project expects to establish a dynamic environment for industry partners, students and scientists to collaborate and devel ....ARC Training Centre for Biofilm Research and Innovation . The ARC Training Centre for Biofilm Research and Innovation aims to transform biofouling management strategies for maritime platforms by building on local and international expertise to mentor and train the next generation of interdisciplinary scientists and engineers. Anticipating evolving regulatory stringency, this project expects to establish a dynamic environment for industry partners, students and scientists to collaborate and develop biofilm management strategies. Expected outcomes include new and enhanced collaborations that advance and translate knowledge to better manage biofouling. The significant benefits will include a generation of industry-focused researchers critical for growing Australia’s Defence industry.Read moreRead less
Making Green Guard® greener: enhancing the efficacy of a biopesticide. The project aims to identify naturally occurring micro-organisms to increase the effectiveness of Green Guard ®, which is a biopesticide used against the Australian plague locust. The project will use next-generation sequencing and other molecular techniques to potentially identify candidate microbes or combinations of microbes that can be added to Green Guard to enhance locust susceptibility. The project also aims to quantif ....Making Green Guard® greener: enhancing the efficacy of a biopesticide. The project aims to identify naturally occurring micro-organisms to increase the effectiveness of Green Guard ®, which is a biopesticide used against the Australian plague locust. The project will use next-generation sequencing and other molecular techniques to potentially identify candidate microbes or combinations of microbes that can be added to Green Guard to enhance locust susceptibility. The project also aims to quantify the interactive impact of temperature and nutrition on immune function, disease resistance and host-plant quality of plague locusts; and to explore the combined effects of temperature, habitat and Green Guard, in combination with candidate microbes or pathogens, on the behaviour and collective movement of locusts. It is anticipated that this will have implications for management and control strategies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100041
Funder
Australian Research Council
Funding Amount
$680,320.00
Summary
National laser-based non-destructive evaluation system. This project aims to establish the first Australian national facility for non-destructive evaluation, consisting of a three-dimensional scanning laser vibrometer, laser shearography, and an optical de-rotator, to enable full-field characterisation of the deformation and damage state of materials and structures. This solution is expected to perform rapid, broad-area scans, characterise dynamic response and wave propagation in human-engineere ....National laser-based non-destructive evaluation system. This project aims to establish the first Australian national facility for non-destructive evaluation, consisting of a three-dimensional scanning laser vibrometer, laser shearography, and an optical de-rotator, to enable full-field characterisation of the deformation and damage state of materials and structures. This solution is expected to perform rapid, broad-area scans, characterise dynamic response and wave propagation in human-engineered or natural structures, and diagnose rotating systems. This will enhance experimental capabilities, with uses spanning many industry sectors including aerospace, naval, automotive and medical.Read moreRead less
Co-design and dynamic mission optimisation of hypersonic flight vehicles. This project aims to deliver fundamental knowledge by integrating the modelling and control with the design of next generation hypersonic platforms. In an era where Australia's national security reliance on geographic isolation and support from allied forces are being challenged, the research outcomes of this project will play an important role in understanding the capabilities of hypersonic systems. The project will also ....Co-design and dynamic mission optimisation of hypersonic flight vehicles. This project aims to deliver fundamental knowledge by integrating the modelling and control with the design of next generation hypersonic platforms. In an era where Australia's national security reliance on geographic isolation and support from allied forces are being challenged, the research outcomes of this project will play an important role in understanding the capabilities of hypersonic systems. The project will also have significant spillover benefits into other complex system domains, where computational tools can be used to aid in design leading to high embedded-IP products for Australian industry. Furthermore, the proposal encompasses a strong research training aspect, with graduates exposed to leading edge industry and academia.Read moreRead less
Subject-specific computational models for accurate evaluation of muscle function in human locomotion. The purpose of this project is to advance current understanding of muscle function during human locomotion. The most significant outcome will be the development of novel computational tools that can play a pivotal role in the healthcare industry through the prevention, diagnosis and treatment of movement disorders.
Design of Real-time Optimisation Methods with Guaranteed Performance. The project aim is the development of a framework for the advancement of optimisation algorithms operating in real-time applications. This project expects to generate new knowledge in the area of systems theory and optimisation, and its application to time-varying problems. Expected outcomes of this project should lead to a new theoretical and practical framework that aims to ameliorate the shortcomings of the existing approac ....Design of Real-time Optimisation Methods with Guaranteed Performance. The project aim is the development of a framework for the advancement of optimisation algorithms operating in real-time applications. This project expects to generate new knowledge in the area of systems theory and optimisation, and its application to time-varying problems. Expected outcomes of this project should lead to a new theoretical and practical framework that aims to ameliorate the shortcomings of the existing approaches that struggle to rapidly respond to new information. This should provide significant benefits. Specifically, this project aims to facilitate a technological leap that generates smaller, faster, and more powerful embedded systems such as broadband services, mobile phones, medical imagining, radar and avionics.Read moreRead less
Silicon: a novel solution to reduce water use and pest damage in wheat. The project aims to improve Australian wheat production by increasing drought resilience and reducing reliance on pesticides. This is achieved by incorporating amorphous silicon (Si), an abundant national resource. Si uptake by wheat has been proven to alleviate stress from drought and pests, but mechanisms and agronomic feasibility remain to be fully assessed. The project will deliver a mechanistic understanding of how Si a ....Silicon: a novel solution to reduce water use and pest damage in wheat. The project aims to improve Australian wheat production by increasing drought resilience and reducing reliance on pesticides. This is achieved by incorporating amorphous silicon (Si), an abundant national resource. Si uptake by wheat has been proven to alleviate stress from drought and pests, but mechanisms and agronomic feasibility remain to be fully assessed. The project will deliver a mechanistic understanding of how Si alleviates stress in wheat, from gene to farm scale, providing cost-benefit analysis and a best–practice toolbox for implementation by farmers. Outcomes are anticipated to provide a cheaper and more environmentally sustainable solution to issues of water scarcity and yield losses to pests in Australia’s leading crop.Read moreRead less