Noval design of a Bi-Ventricular Assist Device (BVAD) Centrifugal Heart Pump as an Implantable Total Artificial Heart. In Australia, 40%(50,797) of all deaths each year are related to heart disease and accounted for 12% (A$4Billion) of total recurrent health expenditure. This innovative research aims at developing a single biventricular assist device (BVAD) driven by a magnetically suspended double-sided centrifugal pump impeller. Current techniques require two implantable devices, thus preventi ....Noval design of a Bi-Ventricular Assist Device (BVAD) Centrifugal Heart Pump as an Implantable Total Artificial Heart. In Australia, 40%(50,797) of all deaths each year are related to heart disease and accounted for 12% (A$4Billion) of total recurrent health expenditure. This innovative research aims at developing a single biventricular assist device (BVAD) driven by a magnetically suspended double-sided centrifugal pump impeller. Current techniques require two implantable devices, thus preventing smaller patients from access to BVAD technology. The expected outcomes will be a significantly small and compact device and provide an alternative to open-heart transplantation, thus helping to alleviate the demand on donor hearts, as well as the strain on the Australian Heath Care System caused by cardiovascular disease.Read moreRead less
Determination of Conductivity Values for Anisotropic Tissue. Well established mathematical models governing the electrical potential in biological tissue can be combined with measurements of the electric potential on the surface of the tissue to provide insight into subsurface tissue damage. However, before such observations can be convincingly accepted, reliable values for the tissue conductivity must be obtained. The aim of this project is to develop mathematical techniques to calculate the co ....Determination of Conductivity Values for Anisotropic Tissue. Well established mathematical models governing the electrical potential in biological tissue can be combined with measurements of the electric potential on the surface of the tissue to provide insight into subsurface tissue damage. However, before such observations can be convincingly accepted, reliable values for the tissue conductivity must be obtained. The aim of this project is to develop mathematical techniques to calculate the conductivity values so that one can apply the equations to solve problems of potential distribution and proceed to accurately simulate electrical potential distributions in damaged tissue. More accurate and reliable conductivity values will allow a better understanding of the way electric current moves through the heart which, in turn, will result in more efficient defibrillators and better diagnosis of abnormal function.Read moreRead less
Mathematical Modelling of the Mechanobiology of Arterial Plaque Growth. Plaque growth is a chronic inflammatory response induced by the interactions between endothelial cells, lipids, monocytes/macrophages, smooth muscle cells and platelets in the arteries. It involves many different biological processes, such as lipid deposition, inflammation and angiogenesis, and their interactions with the microcirculation. To understand the underlying mechanobiology, we propose to develop a mathematical mode ....Mathematical Modelling of the Mechanobiology of Arterial Plaque Growth. Plaque growth is a chronic inflammatory response induced by the interactions between endothelial cells, lipids, monocytes/macrophages, smooth muscle cells and platelets in the arteries. It involves many different biological processes, such as lipid deposition, inflammation and angiogenesis, and their interactions with the microcirculation. To understand the underlying mechanobiology, we propose to develop a mathematical model to interpret plaque growth by integrating these dynamic biological processes. It will offer a systematic rational understanding of plaque growth. New models will be provided to better interpret biological data and contribute to our knowledge in quantifying complex biological mechanisms during growth and development.Read moreRead less
Imaging-based fluid-structure interaction modelling of carotid atherosclerotic plaque. This project aims to combine computational modelling, magnetic resonance imaging (MRI), mechanical measurement and pathological analysis to investigate carotid plaque progression, and quantify the critical blood flow and plaque stress/strain conditions under which plaque rupture is likely to occur. MRI-based 3D computational models with multi-component plaque structures and their interaction with blood flow wi ....Imaging-based fluid-structure interaction modelling of carotid atherosclerotic plaque. This project aims to combine computational modelling, magnetic resonance imaging (MRI), mechanical measurement and pathological analysis to investigate carotid plaque progression, and quantify the critical blood flow and plaque stress/strain conditions under which plaque rupture is likely to occur. MRI-based 3D computational models with multi-component plaque structures and their interaction with blood flow will be developed and solved numerically to identify suitable plaque rupture risk indicators. Mechanical properties of plaque components will be measured ex-vivo and fibre orientation-based constitutive rules will be developed. This project aims to lead to quantitative understandings of plaque progression and rupture.Read moreRead less
Platform technology to decode motor control through ultra high-field MRI. This project aims to advance our understanding of the poorly understood neural circuits that enable fine motor control in humans. To obtain this knowledge, new platform technology will be developed to capture the full kinematics of the hand during concurrent functional magnetic resonance imaging at ultra high-field. This device will allow testing of fundamental theories describing the canonical microcircuits involved in ha ....Platform technology to decode motor control through ultra high-field MRI. This project aims to advance our understanding of the poorly understood neural circuits that enable fine motor control in humans. To obtain this knowledge, new platform technology will be developed to capture the full kinematics of the hand during concurrent functional magnetic resonance imaging at ultra high-field. This device will allow testing of fundamental theories describing the canonical microcircuits involved in hand motion. Expected outcomes include new evidence of mirror neurons and observation of predictive error signals in the motor cortex. This new knowledge paves the way towards improved computer-brain interface technology which is likely to create benefits through translation to applications such as artificial limb control.Read moreRead less
Patient-specific biomechanical modelling for improved treatment of spinal deformity. Spinal deformities negatively affect social acceptance, physical and mental wellbeing in children and adolescents. The direct costs of spinal deformity surgery are approximately $30 million per year in Australia, yet poor treatment outcomes due to post-operative complications incur a much higher cost as patients with persistent pain and disability face a lifetime of dependency and reduced ability to work. The pa ....Patient-specific biomechanical modelling for improved treatment of spinal deformity. Spinal deformities negatively affect social acceptance, physical and mental wellbeing in children and adolescents. The direct costs of spinal deformity surgery are approximately $30 million per year in Australia, yet poor treatment outcomes due to post-operative complications incur a much higher cost as patients with persistent pain and disability face a lifetime of dependency and reduced ability to work. The patient-specific biomechanical modelling techniques developed in this project will reduce complications and improve correction for Australian children who undergo spinal deformity surgery. Better treatment outcomes will ensure quality of life, health and productivity for spinal deformity patients throughout their entire lives.Read moreRead less
The virtual human knee. This project aims to investigate the Virtual Human Knee (VHK) which provides a baseline knowledge about knee mechanics in healthy individuals and a tool for studying knee mechanics in silico. The new knowledge can be used for identifying individuals most at risk for injury, developing solutions for preventing injury and for assessing knee reconstruction and implantation methods. As such, VHK will mitigate the burden of knee injury to Australia and worldwide by progressing ....The virtual human knee. This project aims to investigate the Virtual Human Knee (VHK) which provides a baseline knowledge about knee mechanics in healthy individuals and a tool for studying knee mechanics in silico. The new knowledge can be used for identifying individuals most at risk for injury, developing solutions for preventing injury and for assessing knee reconstruction and implantation methods. As such, VHK will mitigate the burden of knee injury to Australia and worldwide by progressing disciplines including anatomy, bio-mechanics, sport science, rehabilitation, surgery and medical devices.Read moreRead less
Biomechanics of the human spine measured using magnetic resonance imaging. Statistics show that 80% of the population suffer back pain at some time. However, because the spine is very complex our understanding of its mechanics and the causes of back pain are still limited. This project will investigate the anatomy and activity of the spinal muscles and the behaviour of the intervertebral disc in living subjects using innovative Magnetic Resonance Imaging techniques. Significant outcomes will be ....Biomechanics of the human spine measured using magnetic resonance imaging. Statistics show that 80% of the population suffer back pain at some time. However, because the spine is very complex our understanding of its mechanics and the causes of back pain are still limited. This project will investigate the anatomy and activity of the spinal muscles and the behaviour of the intervertebral disc in living subjects using innovative Magnetic Resonance Imaging techniques. Significant outcomes will be new definitive descriptions of the detailed anatomy of the spine and its mechanisms. This will enhance the accuracy and detail of models under development for predicting spinal function following disease, injury or surgical procedures.Read moreRead less
A kinetic measuring system for assistive devices used in paediatric gait. Each year, a proportion of children are born who suffer from disabilities, which limits their ability to walk efficiently. Gait analysis can identify limiting factors in walking ability, and can assess the clinical outcome of treatments. Children who use assistive devices, such as walking frames, are denied the full benefits of gait analysis due to limitations in current equipment. This project addresses this need through ....A kinetic measuring system for assistive devices used in paediatric gait. Each year, a proportion of children are born who suffer from disabilities, which limits their ability to walk efficiently. Gait analysis can identify limiting factors in walking ability, and can assess the clinical outcome of treatments. Children who use assistive devices, such as walking frames, are denied the full benefits of gait analysis due to limitations in current equipment. This project addresses this need through the development of a portable, load-measuring instrument. When integrated with existing equipment, a comprehensive description of assisted walking gait will be possible. This will lead to greater understanding and improved treatment outcomes for such children.Read moreRead less
Development of Advanced Wear Debris Analysis Techniques for Osteoarthritis Study. Wear and tear of joints is the common cause of osteoarthritis, costing $19.25 billion/year. With this cost on the increase, and no cure to date, comes a need to develop effective methods for its diagnosis. This study will provide new knowledge on osteoarthritis progression by allowing strategic use of national health resources. A fuzzy expert system, to be developed utilising the diagnostic/prognostic techniques of ....Development of Advanced Wear Debris Analysis Techniques for Osteoarthritis Study. Wear and tear of joints is the common cause of osteoarthritis, costing $19.25 billion/year. With this cost on the increase, and no cure to date, comes a need to develop effective methods for its diagnosis. This study will provide new knowledge on osteoarthritis progression by allowing strategic use of national health resources. A fuzzy expert system, to be developed utilising the diagnostic/prognostic techniques of this study will significantly reduce cost and time. The project will contribute to the National Strategy by helping older Australians; the major group of osteoarthritis sufferers, to retain their health, independence and productivity.Read moreRead less