Development of advanced ceramic membranes: a robust solution to sustainable water treatment. Australia is one of the driest nations on Earth. While available fresh water supplies dwindle, options to treat 'used' water for reuse are gaining rapid popularity. Membranes are now state-of-the-art for water treatment, including all new desalination plants, but as they are polymeric based, they must be routinely cleaned with chemicals and replaced. The outcomes of this research will demonstrate innovat ....Development of advanced ceramic membranes: a robust solution to sustainable water treatment. Australia is one of the driest nations on Earth. While available fresh water supplies dwindle, options to treat 'used' water for reuse are gaining rapid popularity. Membranes are now state-of-the-art for water treatment, including all new desalination plants, but as they are polymeric based, they must be routinely cleaned with chemicals and replaced. The outcomes of this research will demonstrate innovative functional ceramic membranes which last longer and have lower requirement for cleaning chemicals and expert maintenance. This, in turn, will deliver water at lower cost and reduced environmental burden (chemical and membrane disposal), giving industry more sustainable solutions to treat water, which has now become an essential practice in society.Read moreRead less
Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new el ....Powering Next Generation Wearable Electronics: Moisture Electric Generator . This project aims to develop next generation energy harvesting device which can directly generate electricity from the moisture in the air for self-powered, wearable electronics. The goal will be achieved by developing a new class of carbon based nanomaterials and large scale printing technology, through optimizing the materials defects, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in wearable electronics, significant advances in self-powered, environmentally friendly devices, and commercialisation of the technology to Australian industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0237936
Funder
Australian Research Council
Funding Amount
$100,000.00
Summary
Research facility for plastics and composites : Dynamic Mechanical Analyser and Rheometer System. The Dynamic Mechanical Analyser (DMA) and Control Stress Rheometer System is a unique set of equipment where both instruments can be run simultaneously using the same controller module. The DMA can provide quantitative and qualitative information on high spectrum of mechanical and rheological properties of materials in solid state. The Rheometer complements the DMA by providing information about pro ....Research facility for plastics and composites : Dynamic Mechanical Analyser and Rheometer System. The Dynamic Mechanical Analyser (DMA) and Control Stress Rheometer System is a unique set of equipment where both instruments can be run simultaneously using the same controller module. The DMA can provide quantitative and qualitative information on high spectrum of mechanical and rheological properties of materials in solid state. The Rheometer complements the DMA by providing information about properties of materials in liquid state. The equipment will be used both for academic research of plastic, ceramic and composite materials and for industrial projects in the areas of material processing, recycling of plastics and for building a database of material's properties. Read moreRead less
Industrial Transformation Research Hubs - Grant ID: IH130100017
Funder
Australian Research Council
Funding Amount
$5,000,000.00
Summary
ARC Research Hub for Australian Steel Manufacturing. ARC Research Hub for Australian Steel Manufacturing. The aim of this Research Hub is to develop breakthrough process and product innovations to enable the Australian steel industry to improve its global competitiveness. Based on an integrated, value chain-wide approach to innovation in the steel sector the Research Hub includes projects on innovation strategy and management, customer-focused product development, innovation in coating and surfa ....ARC Research Hub for Australian Steel Manufacturing. ARC Research Hub for Australian Steel Manufacturing. The aim of this Research Hub is to develop breakthrough process and product innovations to enable the Australian steel industry to improve its global competitiveness. Based on an integrated, value chain-wide approach to innovation in the steel sector the Research Hub includes projects on innovation strategy and management, customer-focused product development, innovation in coating and surface engineering technology, and economic and environmental sustainability of iron and steelmaking.Read moreRead less
Tailored Biodegradable Polymers for Injection Moulding Applications. This project aims to engineer and scale up production of biodegradable injection molded products with tailored properties, processing and biodegradation. Specifically we will focus on novel materials and processing technologies in tandem with biodegradation understandings to expand the utilization of starch-based polymers. We will then combine fundamental rheological and polymer processing skills with and product development ex ....Tailored Biodegradable Polymers for Injection Moulding Applications. This project aims to engineer and scale up production of biodegradable injection molded products with tailored properties, processing and biodegradation. Specifically we will focus on novel materials and processing technologies in tandem with biodegradation understandings to expand the utilization of starch-based polymers. We will then combine fundamental rheological and polymer processing skills with and product development experience from both universities and the industrial partner (Plantic Technologies) to scale up processing and develop successful biodegradable products. This project will also enable an Australian owned start-up company with a broad shareholder base to generate significant export income through key commercialization.Read moreRead less
Role of oxide grain boundaries in controlling high temperature corrosion of steels by carbon dioxide-rich gases. Advanced coal combustion technologies make carbon dioxide capture possible, but require improved materials to handle hot carbon dioxide-rich gases. These gases are surprisingly corrosive and the corrosion process is not fully understood. This project aims to achieve this understanding and to provide the basis for future alloy design.
Wearable thermoelectrics for personal heat management. Thermoregulation has substantial implications for energy consumption and human comfort and health. This project aims to develop wearable thermoelectric materials and devices with high cooling performance for personal heat management. A novel assembly approach, coupled with device design and materials engineering strategies, will be developed to engineer flexible thermoelectric materials with unique structures and chemistry. The key breakthro ....Wearable thermoelectrics for personal heat management. Thermoregulation has substantial implications for energy consumption and human comfort and health. This project aims to develop wearable thermoelectric materials and devices with high cooling performance for personal heat management. A novel assembly approach, coupled with device design and materials engineering strategies, will be developed to engineer flexible thermoelectric materials with unique structures and chemistry. The key breakthrough is to design wearable thermoelectric devices with high flexibility and user comfort. The expected outcomes of this project will lead to an innovative cooling technology for personal heat management, which will place Australia at the forefront of wearable electronics and garment industry.Read moreRead less
Smart Polymer Hydrogels for Simultaneous Waste Heat Utilisation and Wastewater Treatment for Sustainable Manufacturing. This project aims to develop dual-functionality, temperature-responsive polymer hydrogels as draw agents for continuous, forward osmosis wastewater treatment processes. It intends to use low–and-medium temperature waste heat as a green input into the process and thus significantly reduce the costs of wastewater treatment, and fresh water consumption, whilst effectively utilisin ....Smart Polymer Hydrogels for Simultaneous Waste Heat Utilisation and Wastewater Treatment for Sustainable Manufacturing. This project aims to develop dual-functionality, temperature-responsive polymer hydrogels as draw agents for continuous, forward osmosis wastewater treatment processes. It intends to use low–and-medium temperature waste heat as a green input into the process and thus significantly reduce the costs of wastewater treatment, and fresh water consumption, whilst effectively utilising waste heat generated in the manufacturing industry. The outcomes of this research aim to provide a unique opportunity for Australian researchers to become world leaders in the rapidly-emerging, energy-efficient forward osmosis technology which is very relevant not only to wastewater treatment, but also to desalination.Read moreRead less
Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
Fabrication of High Performance Nanocomposite Photoanodes with Built-in Electron Transport Superhighway for Photoelectrocatalysis Applications. Worldwide, huge fresh water shortage problems force us to recycle/reuse water. For Australia, this is an urgent issue due to our limited fresh water resources. In recent years, rapidly diminishing fossil fuel supplies and dramatically accelerated global warming gives society no alternative but adopt renewable, clean energies. Globally, there is a united ....Fabrication of High Performance Nanocomposite Photoanodes with Built-in Electron Transport Superhighway for Photoelectrocatalysis Applications. Worldwide, huge fresh water shortage problems force us to recycle/reuse water. For Australia, this is an urgent issue due to our limited fresh water resources. In recent years, rapidly diminishing fossil fuel supplies and dramatically accelerated global warming gives society no alternative but adopt renewable, clean energies. Globally, there is a united front calling for action to address these problems. However, a practical solution to the issues can only be found when economically viable alternative technologies are developed. This project aims to tackle the biggest obstacle - the low sunlight conversion efficiency. The success of the project will result in economically viable water treatment and solar energy conversion technologies. Read moreRead less