All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in wate ....All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in water treatment. The expected outcomes of the project include novel 2D Z-scheme photocatalysts and enhanced capacity in stormwater management.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100098
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
A comprehensive gas/vapour sorption facility for the fast advancement of decarbonised energy technologies. Solutions to clean energy production, storage and use are critical to Australia’s prosperity, yet there is a significant lack of targeted research facilities for the development of the highly needed materials and technologies for powering a sustainable Australia. This facility will bring research efforts closer to practical solutions.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775721
Funder
Australian Research Council
Funding Amount
$520,000.00
Summary
Near Net Shaped Casting and Alloy Development Facility. Nearly all metal production is based around an initial casting phase, often followed by other deformation and thermal processes. This facility will allow us to study current and future advanced alloys and processing routes, including metals of strategic importance to Australia such as aluminium, titanium and magnesium. One of the major innovations for these metals is to directly cast to strip, followed by minimal processing to provide str ....Near Net Shaped Casting and Alloy Development Facility. Nearly all metal production is based around an initial casting phase, often followed by other deformation and thermal processes. This facility will allow us to study current and future advanced alloys and processing routes, including metals of strategic importance to Australia such as aluminium, titanium and magnesium. One of the major innovations for these metals is to directly cast to strip, followed by minimal processing to provide strip products with novel properties, low capital costs and short lead times. The outcomes from this research will support the development of existing and new metal industries in Australia.Read moreRead less
Fundamental Investigation of Kinetics of Ferro-Silicon Reactions in Cupola Scrap Melting Processes. The aims of this project include development of fundamental understanding of Ferro-silicon reactions in cupola scrap melting processes. This project will advance the scrap melting processes by enhancing their economic viability and environmental compatibility by optimising the reactions of Ferro-silicon which is one of the major sources of operating problems. Specifically the project will achieve ....Fundamental Investigation of Kinetics of Ferro-Silicon Reactions in Cupola Scrap Melting Processes. The aims of this project include development of fundamental understanding of Ferro-silicon reactions in cupola scrap melting processes. This project will advance the scrap melting processes by enhancing their economic viability and environmental compatibility by optimising the reactions of Ferro-silicon which is one of the major sources of operating problems. Specifically the project will achieve optimisation of Ferro-silicon utilisation, reduction in refractory consumption, minimisation of industrial slag waste generation, improved product composition control. The scientific outcomes include data and mechanisms of Ferro-silicon reactions with gas and graphite phases, kinetic models to describe the influence of Ferro-silicon and process variables.Read moreRead less
Optimisation and Control of Bagasse Handling System in a Sugar Mill. Bagasse, the fibre residue from sugar cane, is used as fuel in suspension fired boilers for energy production for the sugar milling process. The use of bagasse as a fuel is currently gaining more prominence as the sugar industry looks to co-generation joint ventures with traditional electricity supply and generation authorities. This project is aimed at applying optimisation and control techniques to bagasse handling system in ....Optimisation and Control of Bagasse Handling System in a Sugar Mill. Bagasse, the fibre residue from sugar cane, is used as fuel in suspension fired boilers for energy production for the sugar milling process. The use of bagasse as a fuel is currently gaining more prominence as the sugar industry looks to co-generation joint ventures with traditional electricity supply and generation authorities. This project is aimed at applying optimisation and control techniques to bagasse handling system in a CSR sugar mill so that the fibre residue from sugar cane can be used to gain maximum efficiency in generating energy supplies in the sugar mill. If the project succeeds, other sugar mills from CSR would implement the advanced control system.Read moreRead less
Discrete particle modelling and analysis of complex particle-fluid flows. Multiphase processes are widely used in both conventional and modern industries in Australia and worldwide, however rarely reach more than 60% of design capacity because of a poor understanding of their fundamental characteristics. This project aims to overcome this problem using an extensive combined fundamental and applied approach. The resulting theories, computer models and simulation techniques will be applied to imp ....Discrete particle modelling and analysis of complex particle-fluid flows. Multiphase processes are widely used in both conventional and modern industries in Australia and worldwide, however rarely reach more than 60% of design capacity because of a poor understanding of their fundamental characteristics. This project aims to overcome this problem using an extensive combined fundamental and applied approach. The resulting theories, computer models and simulation techniques will be applied to improve process design, control and optimisation. Consequentially, productivity and Australian competitiveness will be significantly enhanced in its most important industries such as minerals, metallurgical, chemical, energy, and materials.Read moreRead less
Multiscale modelling of the transport phenomena of liquid iron and slag in ironmaking blast furnace. Blast furnace ironmaking is a key operation in the steel industry which, with an annual turnover around $11 billion, is a significant manufacturing sector in Australia. This project, focused on the behaviour of liquid iron and slag, can generate computer models that can reliably describe the complicated multiphase flow and thermochemical processes in the furnace. The implementation of the resulta ....Multiscale modelling of the transport phenomena of liquid iron and slag in ironmaking blast furnace. Blast furnace ironmaking is a key operation in the steel industry which, with an annual turnover around $11 billion, is a significant manufacturing sector in Australia. This project, focused on the behaviour of liquid iron and slag, can generate computer models that can reliably describe the complicated multiphase flow and thermochemical processes in the furnace. The implementation of the resultant models and the new understanding should lead to long life campaigns, better operational control, decreased fuel consumption, improved productivity and reduced environmental impact. This, together with the proposed research training, is important to the development of Australia's competitive steel industry.Read moreRead less
Numerical and experimental studies of the gas-particle flow and dust collection in electrostatic precipitation systems. This project will generate an integrated computer model to describe the gas-solid flow and dust collection in an ElectroStatic Precipitator (ESP). The model can be used to aid the design and control of ESP systems which are widely used for dust collection, leading to more competitive energy and related industries.
X-ray tomographic analysis and modelling of metallurgical coke. This project will apply 3D X-ray micro-tomography and model-based computational analysis to develop innovative approaches to the micro-structural characterisation of metallurgical coke. This has significant ramifications for the iron industry since coke characterisation is of primary importance to improved blast furnace productivity. The project will deliver new quantitative indices of coke microstructure, develop models for simulat ....X-ray tomographic analysis and modelling of metallurgical coke. This project will apply 3D X-ray micro-tomography and model-based computational analysis to develop innovative approaches to the micro-structural characterisation of metallurgical coke. This has significant ramifications for the iron industry since coke characterisation is of primary importance to improved blast furnace productivity. The project will deliver new quantitative indices of coke microstructure, develop models for simulation of micro-structural properties and coke transport properties, and examine coke reactivity in 3D contexts. This project will also be the first study to use multi-scale 3D X-ray tomographic analysis to examine the structural dynamics of coke during both its production and its use in the blast furnace.Read moreRead less
Reforming of Liquid Hydrocarbon Fuels for Application in Solid Oxide Fuel Cells Technology. The project will aim at developing a fuel processing system for solid oxide fuel cells which will have the advantages of being fuel flexible through the conversion of liquid fuels (gasoline, LPG, diesel) for application in small to medium stationary power generation systems. This investigation will also generate fundamental information and understanding concerning the catalytic reforming of liquid hydroca ....Reforming of Liquid Hydrocarbon Fuels for Application in Solid Oxide Fuel Cells Technology. The project will aim at developing a fuel processing system for solid oxide fuel cells which will have the advantages of being fuel flexible through the conversion of liquid fuels (gasoline, LPG, diesel) for application in small to medium stationary power generation systems. This investigation will also generate fundamental information and understanding concerning the catalytic reforming of liquid hydrocarbon fuels to produce adequate feeds for SOFCs. These distributed energy devices are of high efficiency and with a novel technology the industrial partner will aim to offer products with high value propositions in the critical areas of price, reliability and service.Read moreRead less