High purity formaldehyde production from carbon oxides. This project aims to investigate the detailed reaction mechanism of a green chemistry route of producing formaldehyde by reducing carbon monoxide and carbon dioxide in liquid phase. Formaldehyde is a widely used feedstock for chemical industries, but is not considered a green chemical because it is produced using natural gas as the feed, which loses over 61 per cent of energy. This project will maximise the yield and purity of the product, ....High purity formaldehyde production from carbon oxides. This project aims to investigate the detailed reaction mechanism of a green chemistry route of producing formaldehyde by reducing carbon monoxide and carbon dioxide in liquid phase. Formaldehyde is a widely used feedstock for chemical industries, but is not considered a green chemical because it is produced using natural gas as the feed, which loses over 61 per cent of energy. This project will maximise the yield and purity of the product, making it commercially viable. This project’s method for producing formaldehyde is expected to reduce the capital cost and energy losses.Read moreRead less
Novel conversion process for carbon dioxide to chemicals. This project aims to develop a novel sorption enhanced material and system to convert atmospheric carbon dioxide (CO2) to methanol. Climate change is one of the primary long-term problems confronting humankind today. Since the production of CO2 through burning fossil fuel is far greater than the current usage of CO2, there is currently little alternative to storage. As a result, there is concerted effort globally to develop alternate use ....Novel conversion process for carbon dioxide to chemicals. This project aims to develop a novel sorption enhanced material and system to convert atmospheric carbon dioxide (CO2) to methanol. Climate change is one of the primary long-term problems confronting humankind today. Since the production of CO2 through burning fossil fuel is far greater than the current usage of CO2, there is currently little alternative to storage. As a result, there is concerted effort globally to develop alternate uses and conversion technologies for CO2. This project will help further this goal.Read moreRead less
All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in wate ....All-solid-state Z-scheme photocatalysts for water treatment. The project aims to develop high-performance Z-scheme photocatalysts by using two-dimensional (2D) semiconductors as building blocks for low-cost, highly-efficient pathogen inactivation and emerging pollutant degradation in stormwater treatment. The project expects to generate new fundamental knowledge in the area of photocatalyst design and Z-scheme photocatalytic system, and advance the application of photocatalytic oxidation in water treatment. The expected outcomes of the project include novel 2D Z-scheme photocatalysts and enhanced capacity in stormwater management.Read moreRead less
Capturing full-spectrum of solar energy using TiO2 ordered suprastructures. The project aims to develop a titanium dioxide (TiO2) semiconductor that can use full-spectrum solar energy. Solar-driven photocatalytic processes have important applications in water decontamination and energy production. Their effectiveness is dictated by the semiconductor’s absorbance and conversion of photoenergy to chemical energy. Being inexpensive, chemically and mechanically robust, TiO2 is the most promising mat ....Capturing full-spectrum of solar energy using TiO2 ordered suprastructures. The project aims to develop a titanium dioxide (TiO2) semiconductor that can use full-spectrum solar energy. Solar-driven photocatalytic processes have important applications in water decontamination and energy production. Their effectiveness is dictated by the semiconductor’s absorbance and conversion of photoenergy to chemical energy. Being inexpensive, chemically and mechanically robust, TiO2 is the most promising material for the semiconductor. However, unmodified TiO2 only absorbs ultraviolet light (5 per cent of solar energy). With current progress made in visible absorbance, this project aims to significantly improve TiO2’s absorbance in near infrared by doping with upconversion lanthanides and rendering colloidal crystal suprastructures that can trap light.Read moreRead less
Highly efficient electric power and value-added synthesis gas co-generation from methane with zero greenhouse gas emission. This project addresses a novel sealing-free solid oxide fuel cell system producing simultaneously synthesis gas and electricity from methane with zero greenhouse gas emission. The project aims to deliver economic benefits and contribute to environmental protection and increased employment opportunities.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100098
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
A comprehensive gas/vapour sorption facility for the fast advancement of decarbonised energy technologies. Solutions to clean energy production, storage and use are critical to Australia’s prosperity, yet there is a significant lack of targeted research facilities for the development of the highly needed materials and technologies for powering a sustainable Australia. This facility will bring research efforts closer to practical solutions.
Advanced membranes for energy-efficient electrochemical conversion of carbon dioxide to fuel. This project proposes to develop a technology to convert carbon dioxide to liquid fuels using renewable energy as the required energy source. The project will therefore help in the mitigation of carbon dioxide emissions and offset the depletion of fossil fuel reserves.
INVESTIGATION OF THE EFFECT OF ALLOYING ELEMENTS ON SHEAR BAND FORMATION DURING THE WARM ROLLING OF LOW CARBON AND INTERSTITIAL FREE STEELS. This proposal involves the application of three dimensional atom probe field ion microscopy and advanced transmission electron microscopy techniques to study the phenomena of precipitation and solute atoms' interactions with dislocations in warm rolled low carbon steels and interstitial free steels. It is intended to examine the effect of alloying addition ....INVESTIGATION OF THE EFFECT OF ALLOYING ELEMENTS ON SHEAR BAND FORMATION DURING THE WARM ROLLING OF LOW CARBON AND INTERSTITIAL FREE STEELS. This proposal involves the application of three dimensional atom probe field ion microscopy and advanced transmission electron microscopy techniques to study the phenomena of precipitation and solute atoms' interactions with dislocations in warm rolled low carbon steels and interstitial free steels. It is intended to examine the effect of alloying additions on in-grain shear bands formation, texture formation and formability of warm rolled and annealed low carbon steels. Ultimately, the project is concerned with developing of fundamental understanging of solute interactions which provide an improved basis for design of these economically significant steels.Read moreRead less
Innovative thermodynamic process control - the key to sustainable metal use. Large amounts of electronic goods such as computers and mobile phones are discarded each year in Australia. They contain both valuable and toxic metals so dumping them as landfill is unacceptable. Australia has a smelting method which could be adapted to reprocess this waste to recover the valuable metals, returning them for reuse. It would also safely handle the toxics. This project will determine the appropriate s ....Innovative thermodynamic process control - the key to sustainable metal use. Large amounts of electronic goods such as computers and mobile phones are discarded each year in Australia. They contain both valuable and toxic metals so dumping them as landfill is unacceptable. Australia has a smelting method which could be adapted to reprocess this waste to recover the valuable metals, returning them for reuse. It would also safely handle the toxics. This project will determine the appropriate smelting strategies and control methods. As a result, transportation of toxic materials overseas will be eliminated, environmental hazards will be reduced and our sustainable use of metals will be increased.Read moreRead less
The effect of contaminant carbon films on the leaching of gold. A major problem in cyanidation is preg-robbing, which results in severe gold losses to tailings. Too much emphasis has been placed on the blinding and characterisation of free carbon or graphite particles, instead of considering carbon or graphite as a layer on top of other ore particles. It is the aim of this project to investigate the effect of contaminant carbon layers on the leaching of gold from sulphide ores. The understanding ....The effect of contaminant carbon films on the leaching of gold. A major problem in cyanidation is preg-robbing, which results in severe gold losses to tailings. Too much emphasis has been placed on the blinding and characterisation of free carbon or graphite particles, instead of considering carbon or graphite as a layer on top of other ore particles. It is the aim of this project to investigate the effect of contaminant carbon layers on the leaching of gold from sulphide ores. The understanding of the exact role of carbon layers on mineral surfaces in both preg-robbing and leaching is essential to devise process strategies that could lead to improved extraction.Read moreRead less