Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large depos ....Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large deposit of topaz in Torrington, NSW to be used to develop a high-value niche product (fibres) and a large-volume, low-value product (fluoride). This will provide significant economic and environmental benefits and it addresses the research priorities - Resources and Advanced Manufacturing.Read moreRead less
New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expe ....New Paradigm for Materials Technology for AZS Glassmaking Refractories. The project aims to enable the inexpensive manufacture of widely used refractories with reduced energy and materials costs and improved thermal and mechanical properties. The project plans to exploit technology patented by the researchers to fabricate percolated mullite materials from fly ash by sintering, yielding properties equivalent or superior to those of fuse-cast alumina-zirconia-silica refractories (AZS). AZS is expensive since it requires melting by fuse-casting and high-purity raw materials. The project aims to eliminate both requirements by sintering and use of waste fly ash, giving microstructures of dense, direct-bonded, percolated, mullite, single crystals, with residual impurities in the interstices that do not affect creep.Read moreRead less
New Generation Lead-free Piezoelectric Ceramics for Acoustic Sensor Technologies. Cooperative research between University of NSW and Thales Australia to design new Lead-free piezoceramics is of critical importance to Australia's strategic leadership in underwater acoustic technology. This area has been identified by the Department of Defence to be a critical defence capability and essential to Australia's exploration of oil, gas, and minerals. Improved and new transducer components will provide ....New Generation Lead-free Piezoelectric Ceramics for Acoustic Sensor Technologies. Cooperative research between University of NSW and Thales Australia to design new Lead-free piezoceramics is of critical importance to Australia's strategic leadership in underwater acoustic technology. This area has been identified by the Department of Defence to be a critical defence capability and essential to Australia's exploration of oil, gas, and minerals. Improved and new transducer components will provide significant economic benefit to Australia through increased export of sonar technology, particularly to Europe and all Restriction of Hazardous Substances (RoHS) compliant countries. The project will produce highly skilled graduates ensuring an on-going basis for Australia's future innovation in this area.Read moreRead less
Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pi ....Enhanced pigment weathering resistance by coating with high dielectric ceramic. The partner company, Tiwest, based in Western Australia, is a major contributor to the economy, and earns more than $A400m annually in exports. It is the only company in the world that mines, separates, refines and manufactures titania products, including pigments, in one region. The current post-titania particle formation wet-coating process, however, presents a major capital and recurrent cost and necessitates a pigment regrind stage. The research will investigate the development of a highly durable dry-coated pigment utilising a novel high dielectric coating. This development has the potential to ensure the partner company's future competitiveness through reduced processing costs and improved product performance.Read moreRead less
Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. In ....Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. Innovation: For the first time, the properties controlling photo-sensitivity (defect disorder; charge transport; and chemically-induced, local, surface electric fields) will be modified. Outcomes: Technologies for the production of fuel (hydrogen) using renewable energy (solar energy) and a renewable resource (water).
Read moreRead less
PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of tit ....PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of titania for photo-electrochemical devices for hydrogen generation and water decontamination. Innovation: processing of titania with reduced band-gap to be achieved through optimised oxygen nonstoichiometry. Outcome: processing technology of titania with outstanding photo-sensitivity.Read moreRead less
New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke fill ....New Nanoscale Up-converting Photoluminescent Materials for Passive Safety Visual Systems. The demand for safety and security products is growing as the importance of providing an environment safer from natural, accidental or man-made threats increases in the community. Life safety applications in buildings and work environments as well as trains and planes for example are dependent upon the ability for non-powered passive systems to give efficient visual guidance in dangerous dark and smoke filled environments. This project will provide a practical demonstration of the successful implementation of nanotechnology to smaller Australian companies where it will overcome significant drawbacks in current manufacturing and yield new products which are activated in darkness by infrared radiation.Read moreRead less
Oxide Bioceramics for Drug Delivery. Australia has the highest rate of skin cancer in the world. One out of every two Australians will develop skin cancer at some stage during their lives. On average, 740,000 new cases of skin cancer are diagnosed in Australia every year (1 million in the USA). The cost to Australia is over $200 million/year. While today more people are aware of the dangers of UV, the desire to be fashionable outweighs their health concerns. Melanotan is a novel sunscreen soluti ....Oxide Bioceramics for Drug Delivery. Australia has the highest rate of skin cancer in the world. One out of every two Australians will develop skin cancer at some stage during their lives. On average, 740,000 new cases of skin cancer are diagnosed in Australia every year (1 million in the USA). The cost to Australia is over $200 million/year. While today more people are aware of the dangers of UV, the desire to be fashionable outweighs their health concerns. Melanotan is a novel sunscreen solution: a drug that stimulates the body's natural defence mechanism against UV light. Alumina and zirconia bioceramics are ideal implantable drug delivery vehicles because of the long leaching periods possible.Read moreRead less
Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear m ....Advanced shield materials for compact fusion energy. We aim to predict how materials used for shielding sensitive components in nuclear fusion reactors will degrade over time. We will use this knowledge to design advanced alloys for radiation shield, which are critical for the development of more compact fusion reactors design, with lower construction cost, and shorter assembly time. These advanced shield materials may also be used in other applications in radiation fields (e.g. space, nuclear medicine). The project also seeks to extend the Australian nuclear research capability by developing an innovative technique to study radiation damage using the OPAL reactor at ANSTO.Read moreRead less
Non-destructive characterisation of residual stresses for the silicon-on-sapphire technology. Every sapphire wafer for the fabrication of integrated circuits using the silicon-on-sapphire technology is worth more than a thousand dollars, and the cost grows exponentially with successive processing of circuitry. Early detection and prevention of wafer failure is therefore an economic and quality necessity. The fast, non-destructive method to be developed by the proposed research will enable semic ....Non-destructive characterisation of residual stresses for the silicon-on-sapphire technology. Every sapphire wafer for the fabrication of integrated circuits using the silicon-on-sapphire technology is worth more than a thousand dollars, and the cost grows exponentially with successive processing of circuitry. Early detection and prevention of wafer failure is therefore an economic and quality necessity. The fast, non-destructive method to be developed by the proposed research will enable semiconductor electronics manufacturers to achieve a cost-effective fabrication of integrated circuits by detecting damages in wafers at the very early stage of production.Read moreRead less