Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large depos ....Fibre-reinforced composites: Single-crystal mullite fibres from topaz. The project aims to develop the means of fabricating single-crystal mullite fibres from topaz that are suitable for reinforcement of metal and ceramic matrix composites. Single-crystal mullite is the most sought after fibrous additive, but is not available commercially. It is expected to attract an immediate clientele in laboratories and companies servicing the aviation industry and the military. This will allow large deposit of topaz in Torrington, NSW to be used to develop a high-value niche product (fibres) and a large-volume, low-value product (fluoride). This will provide significant economic and environmental benefits and it addresses the research priorities - Resources and Advanced Manufacturing.Read moreRead less
Meshes of Oxide Nanofibres for Next-Generation Ceramic Membranes. Our next-generation ceramic membranes will increase the speed and efficiency of present industrial separations as well as expanding into a variety of new separations, thereby transforming many Australian industries. Exports of this new technology also will generate significant national benefits. Application of these new membranes to removing pollutants and pathogens from water and/or air will bring significant community benefits g ....Meshes of Oxide Nanofibres for Next-Generation Ceramic Membranes. Our next-generation ceramic membranes will increase the speed and efficiency of present industrial separations as well as expanding into a variety of new separations, thereby transforming many Australian industries. Exports of this new technology also will generate significant national benefits. Application of these new membranes to removing pollutants and pathogens from water and/or air will bring significant community benefits globally, addressing such crucial issues as low-cost provision of clean drinking water. Additionally, understanding the cutting-edge science associated with the mechanisms of nanofibre growth and the assembly of nanofibre meshes is highly valuable, making an important contribution to Australia's knowledge-economy.Read moreRead less
Sustainable usage of dredged clay materials as land reclamation fills. Millions of cubic metres of dredged materials are removed from river and sea beds every year in dredging projects. It is common to dump a significant portion of the dredged spoils into the sea which can result in serious environmental problems such as deterioration of water quality, damage to aquatic habitats, disruption of ecosystems and dispersion of fine clay particles in seawater. The proposed use of dredged clays as land ....Sustainable usage of dredged clay materials as land reclamation fills. Millions of cubic metres of dredged materials are removed from river and sea beds every year in dredging projects. It is common to dump a significant portion of the dredged spoils into the sea which can result in serious environmental problems such as deterioration of water quality, damage to aquatic habitats, disruption of ecosystems and dispersion of fine clay particles in seawater. The proposed use of dredged clays as land reclamation fill will lead to a substantial reduction in or even eliminate the need for dumping dredged clays into offshore dumping locations. The stabilized dredged clays have great potential if their geotechnical characteristics are adequately understood.Read moreRead less
Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be disc ....Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be discovered and then incorporated into new microwave components and/or devices developed in response to the requirements of the international wireless telecommunications market. The requested PhD student will gain experience in both the industrial and academic worlds and the skills needed to be part of Australia's high-tech workforce. Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0668469
Funder
Australian Research Council
Funding Amount
$195,000.00
Summary
The Rapid Kinetics Research Facility - an Integrated system for rapid kinetic studies of materials using synchrotron radiation. The Rapid Kinetics Research Facility will provide Australian researchers with the tools to follow and understand very rapid processes within advanced materials. This will greatly assist in: i) the development of more efficient materials processing technologies, ii) the development of advanced catalysts able to neutralize pollutants and reduce the energy cost of industri ....The Rapid Kinetics Research Facility - an Integrated system for rapid kinetic studies of materials using synchrotron radiation. The Rapid Kinetics Research Facility will provide Australian researchers with the tools to follow and understand very rapid processes within advanced materials. This will greatly assist in: i) the development of more efficient materials processing technologies, ii) the development of advanced catalysts able to neutralize pollutants and reduce the energy cost of industrial processes, iii) the development of viable hydrogen fuel storage media and iv) the training of young Australian researchers in advanced methods of materials characterization. Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150101687
Funder
Australian Research Council
Funding Amount
$340,000.00
Summary
Nanostructure Tailoring of Inorganic Membranes by Rapid Thermal Processing. This project aims to produce inorganic membranes with desired nanostructures using a Rapid Thermal Processing (RTP) technique for gas separation applications. The key concept of the research is that the RTP will be able to achieve thin-film membrane layer with a finer microstructure and pore size control without heat stress-induced cracking. RTP aims to deliver superior membrane performance with less than 10 per cent of ....Nanostructure Tailoring of Inorganic Membranes by Rapid Thermal Processing. This project aims to produce inorganic membranes with desired nanostructures using a Rapid Thermal Processing (RTP) technique for gas separation applications. The key concept of the research is that the RTP will be able to achieve thin-film membrane layer with a finer microstructure and pore size control without heat stress-induced cracking. RTP aims to deliver superior membrane performance with less than 10 per cent of the fabrication time compared to normal slow calcination. The outcomes of this new technology aims to make inorganic membranes a commercial reality and maximize the membrane manufacturing capability and productivity of petrochemcial, chemical and clean coal/energy industries.Read moreRead less
AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme envir ....AM of MAX Phase parts for applications in extreme environments. This project aims to develop techniques to synthesize MAX Phase compound materials in-situ using laser additive manufacturing. The project expects to increase jet engine fuel efficiency and thrust, and to fabricate longer-lasting parts for supersonic speed applications. The expected outcomes include well-developed additive manufacturing processes to make high performance engineering components with shape complexity for extreme environment applications, and new methods to increase the 3D printability of brittle materials. This should provide significant benefits to aerospace and defense industries through solving their long standing bottleneck material and processing problems. The outcomes also enhance Australia’s manufacturing capacity.Read moreRead less
Dislocation motion and anelastic recovery in layered ceramic titanate. This project aims to research deformation and facture in brittle ceramic nanowire materials and anelastic behaviour in tensile deformation. Layered sodium titanate is used in energy storage and water treatment, but in-situ tensile tests have observed unconventional deformation behaviour, with significant dislocation motion and anelastic recovery. This project will study the deformation mechanism in layered sodium titanate nan ....Dislocation motion and anelastic recovery in layered ceramic titanate. This project aims to research deformation and facture in brittle ceramic nanowire materials and anelastic behaviour in tensile deformation. Layered sodium titanate is used in energy storage and water treatment, but in-situ tensile tests have observed unconventional deformation behaviour, with significant dislocation motion and anelastic recovery. This project will study the deformation mechanism in layered sodium titanate nanowires through molecular dynamics simulations, empirical interatomic potential, and in situ TEM experiments. Expected outcomes include knowledge of the deformation mechanism of this layered titanate which can be broadened to technologically important layered ceramic materials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100115
Funder
Australian Research Council
Funding Amount
$350,000.00
Summary
High-temperature probes for investigating phase transitions and reaction kinetics in thin films, nanostructured materials and biomaterials. This infrastructure for high temperature surface analysis and in-situ diagnostics as a function of temperature and gas environments will enhance Australia's capabilities in creating new materials for devices that will meet needs in medical, communications, environmental and security applications. The facility will enable researchers to understand and exploi ....High-temperature probes for investigating phase transitions and reaction kinetics in thin films, nanostructured materials and biomaterials. This infrastructure for high temperature surface analysis and in-situ diagnostics as a function of temperature and gas environments will enhance Australia's capabilities in creating new materials for devices that will meet needs in medical, communications, environmental and security applications. The facility will enable researchers to understand and exploit interfacial phenomena and to tailor processing-microstructure-composition correlations, so as to design new materials with the best performance possible. Probes with unique capabilities will measure surface morphology, optical properties, elemental composition and crystallographic phase.The facility will be the first in Australia to offer a comprehensive study of structure and properties at high temperature.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150100280
Funder
Australian Research Council
Funding Amount
$373,536.00
Summary
Bio-inspired multifunctional inorganic nanostructured interfaces. Learning from nature involves taking ideas from nature and developing novel functional materials. This project aims to design novel bio-inspired multifunctional interfaces to prevent the adherence of crystals and solid particles to surfaces, achieve excellent mechanical resilience, and provide multiple photoresponses, based on a deep understanding of the fundamental physiochemical, mechanical, structural, and optical characteristi ....Bio-inspired multifunctional inorganic nanostructured interfaces. Learning from nature involves taking ideas from nature and developing novel functional materials. This project aims to design novel bio-inspired multifunctional interfaces to prevent the adherence of crystals and solid particles to surfaces, achieve excellent mechanical resilience, and provide multiple photoresponses, based on a deep understanding of the fundamental physiochemical, mechanical, structural, and optical characteristics of natural multifunctional surfaces/interfaces in the target natural species. This project aims to aid in the design of new bio-inspired smart materials and deliver novel technologies for materials synthesis for potential uses in the chemical industry, sustainable energy applications, and agriculture.Read moreRead less