Engineering quantum-size bioceramics: Photocatalytic / sonocatalytic ceria. This project aims to design and engineer photocatalytic ceria of systematically controlled grain sizes and morphologies, using doping methods to achieve pure and mixed quantum confinement (which enhances performance). The intended outcomes of the computation, fabrication, and validation approach are a fundamental knowledge of the processing-performance matrix and reproducible photocatalysts of optimised performance. Whil ....Engineering quantum-size bioceramics: Photocatalytic / sonocatalytic ceria. This project aims to design and engineer photocatalytic ceria of systematically controlled grain sizes and morphologies, using doping methods to achieve pure and mixed quantum confinement (which enhances performance). The intended outcomes of the computation, fabrication, and validation approach are a fundamental knowledge of the processing-performance matrix and reproducible photocatalysts of optimised performance. While these ceramics will be applied as bioceramics, which can be activated by ultraviolet light, X-rays and ultrasound, the benefits will be applicable in energy (solar cells, photoelectrodes) and the environment (air and water purification).Read moreRead less
Formation of bone-like materials for bone repair and regeneration. A successful outcome for this project would lead to the production and application of new bone-like calcium phosphate materials. Enhanced bioactivity of this material would lead to higher but controlled rates of calcium phosphate release. An understanding of the formation process of these materials and the controlled release of calcium phosphates has the potential to slow the development of metabolic diseases such as osteoporosis ....Formation of bone-like materials for bone repair and regeneration. A successful outcome for this project would lead to the production and application of new bone-like calcium phosphate materials. Enhanced bioactivity of this material would lead to higher but controlled rates of calcium phosphate release. An understanding of the formation process of these materials and the controlled release of calcium phosphates has the potential to slow the development of metabolic diseases such as osteoporosis. The WHO reports that osteoporosis is the second largest health care problem world-wide. In 2002, 44 million people in the USA were estimated to be at risk. This and similar figures in Australia and around the world emphasize the urgency of understanding and appropriately combating weak bone degenerative diseases.Read moreRead less
Design Optimisation for Fabrication of Ceramic Prosthetic Devices. The project aims to develop computer aided design and fabrication for ceramic prosthesis. It will help establish a world-class biomedical instrumentation company having part of its research and development in Australia. The study will not only foster domestic research expertise, but also provide the local prosthetic community and biomedical industry with an opportunity to participate in further innovation of biomaterials, biomedi ....Design Optimisation for Fabrication of Ceramic Prosthetic Devices. The project aims to develop computer aided design and fabrication for ceramic prosthesis. It will help establish a world-class biomedical instrumentation company having part of its research and development in Australia. The study will not only foster domestic research expertise, but also provide the local prosthetic community and biomedical industry with an opportunity to participate in further innovation of biomaterials, biomedical software and equipment. The outcomes will directly benefit the Australian prosthetic profession. Improvement in prosthesis restorative longevity for our increasing ageing population will support the national research goal of ageing well, ageing productively.Read moreRead less
Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown ....Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown that the bioactivity of HAp coatings strongly correlates with surface roughness on the scale of bone cells. This project will explore cell-attachment behaviour for hydroxyapatite coatings prepared by plasma spraying compared with engineered surface morphology/chemistry by microlithography and vapour coating.Read moreRead less
Chip-scale implantable bionics for next generation therapeutic neural prostheses. Australia has an unmatched reputation as a world leader in neuroprostheses. Most notable of these is the bionic ear and, more recently, leading edge research towards a bionic eye. This project will combine the research strengths and experiences from both the hearing and visual bionics fields to address the main obstacles that prevent the number of electrical stimulation channels (equating to the number of frequenci ....Chip-scale implantable bionics for next generation therapeutic neural prostheses. Australia has an unmatched reputation as a world leader in neuroprostheses. Most notable of these is the bionic ear and, more recently, leading edge research towards a bionic eye. This project will combine the research strengths and experiences from both the hearing and visual bionics fields to address the main obstacles that prevent the number of electrical stimulation channels (equating to the number of frequencies heard by the deaf, and the number of spots of light seen by the blind) from increasing. The study will improve our understanding of the electrode-tissue interface, the life-long implantablity, and electrical circuitry that will allow future bionic devices to significantly improve their performance.Read moreRead less
X-Ray Activation of Photocatalytic Titania-Coated Biomedical Implants in Situ. The main causes of biomedical implant failure are loosening and infection, which may require revision surgery. The project has the potential to solve these widespread and expensive problems by formation of a coating of strongly (chemically) bonded and photocatalytically active titania on the titanium implant surface and short-term low-dose X-irradiation. This work has the potential to provide the biomedical industry w ....X-Ray Activation of Photocatalytic Titania-Coated Biomedical Implants in Situ. The main causes of biomedical implant failure are loosening and infection, which may require revision surgery. The project has the potential to solve these widespread and expensive problems by formation of a coating of strongly (chemically) bonded and photocatalytically active titania on the titanium implant surface and short-term low-dose X-irradiation. This work has the potential to provide the biomedical industry with a revolutionary development in both implant coating design and quality with self-disinfection capacity after implantation.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100115
Funder
Australian Research Council
Funding Amount
$350,000.00
Summary
High-temperature probes for investigating phase transitions and reaction kinetics in thin films, nanostructured materials and biomaterials. This infrastructure for high temperature surface analysis and in-situ diagnostics as a function of temperature and gas environments will enhance Australia's capabilities in creating new materials for devices that will meet needs in medical, communications, environmental and security applications. The facility will enable researchers to understand and exploi ....High-temperature probes for investigating phase transitions and reaction kinetics in thin films, nanostructured materials and biomaterials. This infrastructure for high temperature surface analysis and in-situ diagnostics as a function of temperature and gas environments will enhance Australia's capabilities in creating new materials for devices that will meet needs in medical, communications, environmental and security applications. The facility will enable researchers to understand and exploit interfacial phenomena and to tailor processing-microstructure-composition correlations, so as to design new materials with the best performance possible. Probes with unique capabilities will measure surface morphology, optical properties, elemental composition and crystallographic phase.The facility will be the first in Australia to offer a comprehensive study of structure and properties at high temperature.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0346882
Funder
Australian Research Council
Funding Amount
$296,000.00
Summary
A Micro-CT facility for non-destructive 3D X-ray microscopy of opaque materials. This project will establish a Micro-CT facility for non-destructive 3D X-ray microscopy of the internal structure of materials. The facility will support research from a broad spectrum of disciplines and extend regional microscopy and microanalysis capabilities. With a resolution of 1.8µm this instrument will provide 3D images with virtually no sample preparation. The range of materials that this applies to includes ....A Micro-CT facility for non-destructive 3D X-ray microscopy of opaque materials. This project will establish a Micro-CT facility for non-destructive 3D X-ray microscopy of the internal structure of materials. The facility will support research from a broad spectrum of disciplines and extend regional microscopy and microanalysis capabilities. With a resolution of 1.8µm this instrument will provide 3D images with virtually no sample preparation. The range of materials that this applies to includes minerals, wood, biomaterials, polymers, composites, archaeological ceramics and mummified tissue, and biological materials such as bone, teeth and coral. This facilitates research which had been considered too difficult because of the sample preparation needed to examine internal structure.
Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0883056
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Vacuum Ultraviolet Spectrophotometer and Rapid Photoluminescence Mapping System for Development of Advanced Materials and Biosystems. Australia's energy and renewable energy, defence, biosystem and pharmaceutical industries are spearheading the advancement of technologies in the global competitive market. They are the engines of Australian economy's strength. Future progress of these industries is expected to be largely driven by advances in materials and biosystems. The installation of the p ....Vacuum Ultraviolet Spectrophotometer and Rapid Photoluminescence Mapping System for Development of Advanced Materials and Biosystems. Australia's energy and renewable energy, defence, biosystem and pharmaceutical industries are spearheading the advancement of technologies in the global competitive market. They are the engines of Australian economy's strength. Future progress of these industries is expected to be largely driven by advances in materials and biosystems. The installation of the proposed facilities will add a new dimension to high-level research performance and significantly enhance the capability for characterization of various forms of materials and biosystems in Australia. The continual development of advanced material and biosystem technology will potentially provide a sustainable means for meeting the increasing global challenge for the industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100036
Funder
Australian Research Council
Funding Amount
$440,000.00
Summary
National in-situ transmission electron microscope facilities. This project will establish six complementary transmission electron microscope (TEM) facilities at various locations. The establishment of the facilities will be a key step in developing advanced capacity in Australia and will support ground-breaking research in diverse material systems for various high-performing applications, including electronics, optoelectronics, light metals, biomaterials, energy, and environment.