Managing Hydrate Formation for Viable CO2 and Energy Transport. Increasing the allowable water content during the pipeline transportation of carbon dioxide (CO2) would greatly increase the viability of carbon capture and storage but would also increase the risk of CO2-hydrate blockages. Subsea methane (CH4) hydrate sediments represent a tremendous new energy resource if blockages in production pipelines can be avoided. Conventional oil industry approaches to hydrate avoidance are of limited rele ....Managing Hydrate Formation for Viable CO2 and Energy Transport. Increasing the allowable water content during the pipeline transportation of carbon dioxide (CO2) would greatly increase the viability of carbon capture and storage but would also increase the risk of CO2-hydrate blockages. Subsea methane (CH4) hydrate sediments represent a tremendous new energy resource if blockages in production pipelines can be avoided. Conventional oil industry approaches to hydrate avoidance are of limited relevance and too expensive for these new applications. Formation probability distributions, cohesive forces and agglomeration tendencies of CO2 and CH4 hydrates are intended to be measured and integrated into predictive multi-phase flow models, enabling quantitative risk assessments of blockages in CO2 transport or hydrate production pipelines.Read moreRead less
Novel carbon dioxide tolerant ceramic membranes for oxygen separation to improve the viability of clean energy technology. Conventional cryogenic air separation is a major economic impediment to the deployment of these low emission technologies like Callide oxyfuel combustion. This project will lead to the discovery of a new class of oxygen selective membranes for air separation with significantly reduced cost to improve the viability of these clean energy technologies.
Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research w ....Carbon-Supported Iron Catalysts for Selective Catalytic Reduction of NO. Nitric oxide (NO) is a major pollutant from combustion systems. This project aims to develop cost-effective and environmentally benign zerovalent iron catalysts supported on carbon material for selective catalytic reduction (SCR) of NO using CO and unburned hydrocarbons as in-situ reductants. By applying differential reactor experimentation, kinetic modelling and advanced material characterisation techniques, the research will unravel complex relationships among catalyst structural features and activity, NO reduction mechanisms, and catalyst performance under practically relevant combustion conditions that underpin the development of an effective yet affordable SCR technology to control NO emission from industrial utilities and automobiles.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE140101094
Funder
Australian Research Council
Funding Amount
$395,220.00
Summary
Precision Spectroscopy of CO2 Exchange in Hydrates for Clean Energy Production. Carbon dioxide capture and sequestration is a widely considered climate change mitigation strategy. Clathrate hydrates of natural gas, found in deep-water ocean sediments, represent a tremendous opportunity for simultaneous carbon dioxide sequestration and clean energy production. By injecting carbon dioxide into the hydrate reservoir, methane can be displaced and replaced by carbon dioxide. This project will use Ram ....Precision Spectroscopy of CO2 Exchange in Hydrates for Clean Energy Production. Carbon dioxide capture and sequestration is a widely considered climate change mitigation strategy. Clathrate hydrates of natural gas, found in deep-water ocean sediments, represent a tremendous opportunity for simultaneous carbon dioxide sequestration and clean energy production. By injecting carbon dioxide into the hydrate reservoir, methane can be displaced and replaced by carbon dioxide. This project will use Raman spectroscopy and nuclear magnetic resonance imaged core-flood experiments to develop a fundamental understanding of the exchange mechanisms governing the replacement of the methane molecule in the hydrate cage with carbon dioxide. This knowledge will be critical for future development of these resources to safely extract methane from sub-sea hydrates.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100205
Funder
Australian Research Council
Funding Amount
$150,000.00
Summary
A novel high-pressure system for multiple gas adsorption. This facility will equip researchers with analytical capabilities for research in the field of multi-gas adsorption. The facility will be of great significance to clean energy research, such as greenhouse gas emission control and hydrogen production and storage.
Synthetic natural gas and biochar from biomass for energy services in remote communities and soil carbon sequestration. Resources, industry and rural communities, the backbone of Australian economy, are confronted by unprecedented challenges of carbon pollution reduction, land conservation and eco-sustainability to combat global climate change. This exciting, highly integrated and multidisciplinary project will develop a scientific basis and technological options for the resources industry and r ....Synthetic natural gas and biochar from biomass for energy services in remote communities and soil carbon sequestration. Resources, industry and rural communities, the backbone of Australian economy, are confronted by unprecedented challenges of carbon pollution reduction, land conservation and eco-sustainability to combat global climate change. This exciting, highly integrated and multidisciplinary project will develop a scientific basis and technological options for the resources industry and remote communities to respond to these challenges. The outcomes of this research will enable the deployment of renewable biomass energy technology, bio-char for carbon storage, and affect the restoration of marginal lands and salinity levels in an environmentally and economically sustainable way, thus contributing to the development of an environmentally sustainable Australia.Read moreRead less
Efficient Pipeline Transport of Highly Concentrated Wastewater Sludge . This project aims to investigate the rheology and fluid mechanics of highly concentrated wastewater sludges and develop tools to support effective pipeline designs for wastewater treatment plants. The project expects to generate new knowledge about the complex flow of concentrated wastewater which will enable predictive models to support the design and optimization of pipeline transport systems. Expected outcomes of the proj ....Efficient Pipeline Transport of Highly Concentrated Wastewater Sludge . This project aims to investigate the rheology and fluid mechanics of highly concentrated wastewater sludges and develop tools to support effective pipeline designs for wastewater treatment plants. The project expects to generate new knowledge about the complex flow of concentrated wastewater which will enable predictive models to support the design and optimization of pipeline transport systems. Expected outcomes of the project include a new toolkit that will enable wastewater treatment plants to design and optimize both existing and future pipeline systems. This will support the Australian wastewater industry to plan for future growth, increase throughput and efficiency, reduce environmental pollutants, and capital and operating costs.Read moreRead less
3-D Printed Catalytic Monoliths for Energy Efficient Carbon Conversion. Carbon Capture and Utilisation (CCU) is an essential pathway for reducing carbon in the Earth's atmosphere. However a major hurdle in the carbon utilisation part is that the conversion technologies often rely on energy derived from fossil sources. Electrification of carbon conversion processes can overcome this hurdle by providing this energy via renewables. This project aims to develop an electrically powered energy efficie ....3-D Printed Catalytic Monoliths for Energy Efficient Carbon Conversion. Carbon Capture and Utilisation (CCU) is an essential pathway for reducing carbon in the Earth's atmosphere. However a major hurdle in the carbon utilisation part is that the conversion technologies often rely on energy derived from fossil sources. Electrification of carbon conversion processes can overcome this hurdle by providing this energy via renewables. This project aims to develop an electrically powered energy efficient catalytic process for carbon conversion. A modular 3-D printed monolithic catalytic reactor prototype powered by induction or resistive heating will be developed to minimise energy loss in the carbon conversion process. An expected outcome of this project is translation of this prototype in a CCU pilot scale facility.Read moreRead less
Fires of halogenated industrial chemicals and their impact on the Australian environment. Recent large fires of industrial chemicals in Australia led to significant environmental pollution. In this project, we will develop sophisticated techniques to assess pollutants formed in fires of commonly used industrial chemicals. The results will find immediate applications in training fire brigades in their response to chemical fires.
Low emission iron and steelmaking using hydrogen to pre-reduce lump ore. This project aims to develop and apply a new route of lump iron ore pre-reduction with hydrogen or H2-enriched gases for ironmaking to minimise CO2 emission from steel production. The route will be built up on the base of H2 reduction kinetics of iron ore and with novel technologies such as CO2 recycle and H2-heating using hot blast, underpinning the hydrogen economy by addressing the environmental concerns in mineral and s ....Low emission iron and steelmaking using hydrogen to pre-reduce lump ore. This project aims to develop and apply a new route of lump iron ore pre-reduction with hydrogen or H2-enriched gases for ironmaking to minimise CO2 emission from steel production. The route will be built up on the base of H2 reduction kinetics of iron ore and with novel technologies such as CO2 recycle and H2-heating using hot blast, underpinning the hydrogen economy by addressing the environmental concerns in mineral and steel industries. It is not only significant for low-carbon steel production, but also for better fundamental understanding to develop the future zero-emission iron and steelmaking with hydrogen. The project will be very beneficent because it increases the use of lump iron ore and expends Australian export of iron ores.Read moreRead less