Development of a novel and practical method for fabricating carbon nanotube reinforced polymer composites for automotive applications. An effective, economical and environmentally friendly technology will be developed by this project to fabricate carbon nanotube reinforced polymer composites. The thus obtained products will be applied as automotive parts.
Development of next generation smart sucker rod wear guides . In a natural gas wells, sucker rod guides protect the production tubing from wear by the rod string. Premature and erratic failures are costing the industry tens of millions every year. In collaboration with two local SMEs, this project aims to develop the next generation of smart and durable wear guides. The project seeks to understand the complex three body wear mechanisms that drive guide and tubing wear, then use this knowledge to ....Development of next generation smart sucker rod wear guides . In a natural gas wells, sucker rod guides protect the production tubing from wear by the rod string. Premature and erratic failures are costing the industry tens of millions every year. In collaboration with two local SMEs, this project aims to develop the next generation of smart and durable wear guides. The project seeks to understand the complex three body wear mechanisms that drive guide and tubing wear, then use this knowledge to develop new wear resistant compounds and develop a smart guide that provides feedback on its wear state. This will enable the industry partners to supply cutting edge technology to the global oil and gas industry that not only reduces well operation cost but also enhances well resilience.Read moreRead less
Novel microwave processing of carbon nanotube/thermoplastic composites. This project aims to develop a novel fabrication process for carbon nano-tube (CNT) / thermoplastic composites. The method, with lab based ‘proof of concept’, uses microwaves and overcomes problems of dispersion and aggregation of CNTs, which limit properties of the nano-composites. At lab scale, a 50 per cent increase in stiffness of polypropylene and an increase in electrical conductivity with the addition of 0.5 weight pe ....Novel microwave processing of carbon nanotube/thermoplastic composites. This project aims to develop a novel fabrication process for carbon nano-tube (CNT) / thermoplastic composites. The method, with lab based ‘proof of concept’, uses microwaves and overcomes problems of dispersion and aggregation of CNTs, which limit properties of the nano-composites. At lab scale, a 50 per cent increase in stiffness of polypropylene and an increase in electrical conductivity with the addition of 0.5 weight percent CNT has been demonstrated. This project should unravel mechanisms by which these outstanding property improvements are achieved and will scale up the process to industrial level. Expected outcomes will be economical, lighter and stronger plastics for manufacturing applications such as rotational molding, transport and electronic packaging.Read moreRead less
High performance polymer fibres for recyclable composites . The project aims to develop novel drawn polymer fibres with aligned carbon nanotubes incorporated inside and also grafted nanotubes on their surface. Such polymer fibres can be used to reinforce thermoplastics to make high performance composites with effective recyclability. This is important as the existing thermosetting composites are not recyclable and significant property enhancement require high loading (>30%) of reinforcing fibres ....High performance polymer fibres for recyclable composites . The project aims to develop novel drawn polymer fibres with aligned carbon nanotubes incorporated inside and also grafted nanotubes on their surface. Such polymer fibres can be used to reinforce thermoplastics to make high performance composites with effective recyclability. This is important as the existing thermosetting composites are not recyclable and significant property enhancement require high loading (>30%) of reinforcing fibres. The outcomes of this project will be novel technology for making high stiffness polymer fibres and their use in thermoplastic composites. The benefits will be to allow easy processing and recycling. They will be used in down-sizing of high volume products and high value automotive or aerospace products.Read moreRead less
Testing, modelling and engineering applications of topologically interlocking structures. The CI and his international collaborator have recently proposed a new principle of design of materials and structures based on topological interlocking of constituent elements. Elements of simple shape, such as tetrahedra, are assembled in structures that keep their integrity without any binder or connectors. Unusual properties, such as high fracture toughness and damage tolerance were found. The project a ....Testing, modelling and engineering applications of topologically interlocking structures. The CI and his international collaborator have recently proposed a new principle of design of materials and structures based on topological interlocking of constituent elements. Elements of simple shape, such as tetrahedra, are assembled in structures that keep their integrity without any binder or connectors. Unusual properties, such as high fracture toughness and damage tolerance were found. The project aims at investigating the mechanical and acoustic properties of the newly discovered interlockable geometries (cubes, octahedra, dodecahedra and icosahedra) and identifying the areas of application. The project will promote the international leading role of the collaborating institutions in this novel field.Read moreRead less
A NEW CONCEPT IN DESIGN OF MATERIALS AND STRUCTURES BASED ON TOPOLOGICALLY INTERLOCKED ELEMENTS. The project aims to develop a new concept in materials design based on assemblies of interlocked elements. Interlocking is achieved topologically by special arrangements of blocks without connectors. Such assemblies can form structures possessing special mechanical properties and serve as load-bearing skeletons in composites with a binder phase providing desired functional properties. Various types o ....A NEW CONCEPT IN DESIGN OF MATERIALS AND STRUCTURES BASED ON TOPOLOGICALLY INTERLOCKED ELEMENTS. The project aims to develop a new concept in materials design based on assemblies of interlocked elements. Interlocking is achieved topologically by special arrangements of blocks without connectors. Such assemblies can form structures possessing special mechanical properties and serve as load-bearing skeletons in composites with a binder phase providing desired functional properties. Various types of interlocked assemblies will be modelled, produced and tested to determine their mechanical and acoustic properties. A range of experimental techniques tailored for these unusual assemblies will be employed. The expected outcome will be the implementation of the new design principle in multifunctional materials and structures.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC210100023
Funder
Australian Research Council
Funding Amount
$4,943,949.00
Summary
ARC Training Centre in Bioplastics and Biocomposites. There is unprecedented growth in demand for bioderived and biodegradable materials. This Training Centre in Bioplastics and Biocomposites will capitalise on Australia’s abundance of the requisite natural bioresources to drive advances in technology for the development of bioplastic and biocomposite products for the new bioeconomy. The aim is to deliver leading edge research with a holistic focus on technical, social, policy and end of life so ....ARC Training Centre in Bioplastics and Biocomposites. There is unprecedented growth in demand for bioderived and biodegradable materials. This Training Centre in Bioplastics and Biocomposites will capitalise on Australia’s abundance of the requisite natural bioresources to drive advances in technology for the development of bioplastic and biocomposite products for the new bioeconomy. The aim is to deliver leading edge research with a holistic focus on technical, social, policy and end of life solutions, training a cohort of industry ready research specialists to underpin Australia’s transition to a globally significant bioplastics and biocomposites industry, while at the same time laying the foundations for accelerated growth in this space.Read moreRead less
Advanced glazing systems for solar energy harvesting and radiation control. Development of advanced energy-saving glass and glazings capable of generating electricity is expected to lead towards new products of significant commercial potential. The outcomes of this project undertaken by Edith Cowan University and Tropiglas will raise the energy efficiency of commercial buildings and vehicles to levels not possible with other technologies.
Helium recovery from liquefied natural gas waste stream using nanoporous mxene materials. The waste streams from many liquefied natural gas (LNG) industries still contains valuable helium, a possible next mineral to sustain our economic growth. This project aims to efficiently separate helium from methane and nitrogen via the layered two dimensional materials. This project will seek to understand the assembling behaviour of these nano-sized Mxene flakes and their molecular sieving properties. Au ....Helium recovery from liquefied natural gas waste stream using nanoporous mxene materials. The waste streams from many liquefied natural gas (LNG) industries still contains valuable helium, a possible next mineral to sustain our economic growth. This project aims to efficiently separate helium from methane and nitrogen via the layered two dimensional materials. This project will seek to understand the assembling behaviour of these nano-sized Mxene flakes and their molecular sieving properties. Australia is playing a leading role in the global liquefied natural gas (LNG) production and trade. This project expects to further position Australia at the forefront of intellectual leadership in the field of gas processing and material development. This will have significant benefits, such as further improving these LNG projects economics by cost-effectively producing helium as a valuable by-product via advanced porous nano-materials.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100094
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Selective laser melting - an advanced manufacturing and physical modelling technology for the digital age. Selective laser melting is a new manufacturing technology that creates parts layer by layer directly from a computer model, eliminating the need for tooling or machining. This technology will be applied to a diverse range of research areas from producing the next generation of medical implants and devices to improving our understanding of geo-materials.