Assimilation of architectural and services design in early design modelling. How can buildings in a climate as varied as Australia's balance the best environmental comfort standards for their human occupants, cost and at the same time meet the urgent imperative of reduced energy consumption and associated carbon emissions? This practice-based research will develop tools to support more informed decision making in the earliest stage of an integral approach to services in the design of buildings. ....Assimilation of architectural and services design in early design modelling. How can buildings in a climate as varied as Australia's balance the best environmental comfort standards for their human occupants, cost and at the same time meet the urgent imperative of reduced energy consumption and associated carbon emissions? This practice-based research will develop tools to support more informed decision making in the earliest stage of an integral approach to services in the design of buildings. It will provide knowledge about designing architecture that is more environmentally responsive, can provide comfortable air in more optimised ways, that consume less energy and do this through promoting smarter use of information in practice.Read moreRead less
Stabilization of railway subgrade by lime-flyash slurry injection. The rail network in Australia provides a major transport route for commuters as well as transportation of goods. The subgrade of railway track should provide adequate support for the overlying ballast and capping layers. Hence, a poor subgrade always results in track problems associated with uneven track, fouled ballast, and misalignment of the track. This project will investigate in detail the fundamental mechanisms and key para ....Stabilization of railway subgrade by lime-flyash slurry injection. The rail network in Australia provides a major transport route for commuters as well as transportation of goods. The subgrade of railway track should provide adequate support for the overlying ballast and capping layers. Hence, a poor subgrade always results in track problems associated with uneven track, fouled ballast, and misalignment of the track. This project will investigate in detail the fundamental mechanisms and key parameters involved in the improvement of subgrade soil by injecting lime-flyash slurry. This project will develop an improved design procedure for lime-flyash slurry injection in the field based on experimental and numerical modelling.Read moreRead less
Development of economical beam-column connections for robust composite steel-concrete structural frames. The proposed construction systems will offer a competitive and more robust alternative for developers, building owners and occupants. The successful development of the proposed construction systems will lead to an increased market for blind bolts, steel circular hollow sections, steel Universal Beams and metal decking. An added benefit of the proposed systems is an anticipated improvement in ....Development of economical beam-column connections for robust composite steel-concrete structural frames. The proposed construction systems will offer a competitive and more robust alternative for developers, building owners and occupants. The successful development of the proposed construction systems will lead to an increased market for blind bolts, steel circular hollow sections, steel Universal Beams and metal decking. An added benefit of the proposed systems is an anticipated improvement in performance, relative to existing systems, under low probability, high consequence events such as 2500-year return period level earthquakes (in the relevant region) or blast loading. These unique and innovative structural solutions should drive the competitive advantage of Australian engineers in international markets.Read moreRead less
Improvement of the performance of water-sensitive geomaterials using hydrophobic additives. Geo-structures such as road and railway bases suffer from water induced damage because they readily interact with the atmosphere and shallow water tables. Under traffic loading, damage to geo-structures occurs as cracking, rutting and roughness, when the strength and stiffness of the geomaterials are compromised by on-going moisture variations. Substantial cost savings to the community can be made if ef ....Improvement of the performance of water-sensitive geomaterials using hydrophobic additives. Geo-structures such as road and railway bases suffer from water induced damage because they readily interact with the atmosphere and shallow water tables. Under traffic loading, damage to geo-structures occurs as cracking, rutting and roughness, when the strength and stiffness of the geomaterials are compromised by on-going moisture variations. Substantial cost savings to the community can be made if effective methods can be found to minimise such damage. This project proposes to study a novel technique, in which blends of hydrophobic polymer additives are used to increase the stability of geomaterials subjected to varying moisture levels and traffic loading.Read moreRead less
Special Research Initiatives - Grant ID: SR0354805
Funder
Australian Research Council
Funding Amount
$10,000.00
Summary
Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies. There is an urgent need to rehabilitate existing structures that are considered inadequate in strength and serviceability. Frontier strengthening technologies (such as external post-tensioning and plate bonding) using conventional and advanced materials are being currently developed in Australia by different groups, but as yet not in a coordinated manner. The aim of this network is to bring tog ....Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies. There is an urgent need to rehabilitate existing structures that are considered inadequate in strength and serviceability. Frontier strengthening technologies (such as external post-tensioning and plate bonding) using conventional and advanced materials are being currently developed in Australia by different groups, but as yet not in a coordinated manner. The aim of this network is to bring together a multi-disciplinary team with complementary strengths to provide an integrated solution for rehabilitation of structures. The core of the network focuses on design tools, linking the various technologies to provide appropriate rehabilitation and understanding of life cycle demands for major infrastructure.Read moreRead less
Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual defl ....Prediction of Time-dependent Deformations in Post-tensioned Concrete Suspended Slabs in Tall Buildings. The proposed project aims to develop an analytical model that can predict the time-dependent deformations in post-tensioned concrete slabs considering concrete shrinkage and creep, cracking, and bond-slip behaviour. Over the past several years, numerous cases have been reported in Australia and elsewhere, of flexural elements for which the calculated deflection is far less than the actual deflection leading to serviceability problems. The significance of this investigation hence lies in its potential to provide a solution to more accurately predict service-life deflections in post-tensioned concrete suspended slabs and validate the model with real-life deflections monitored over time on a current building project.Read moreRead less
The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation ....The response of beams subjected to axial load and lateral soil movements. Beams (piles, soil nails, and pipelines) are not only subjected to axial (vertical, axial and longitudinal)loading, but often withstand simultaneous lateral loading, due to either explicit structural loads, or due to loads induced by movement of the soils in which they are founded. Bridge piles adjacent to an approach embankment are one example. This project will provide experimental evidence to assist with the estimation of capacity, axial and shear resistance, the validation of unified solutions for beams subjected to simultaneous lateral soil movements and axial loads. Such experimental evidence and analytical solutions are not currently available. The evidence will also assist with solving a contradictory, existing design principle, which will lead to an economic and efficient design approach.Read moreRead less
Thin-walled Structures Subjected to Impact and Blast Loading. Terrorist attacks have cost Australians much human grief and billions of dollars. Containing the consequences of a blast or impact is crucial to survival and restricting damage to critical civilian/defence infrastructure. Thin-walled structures are used extensively in such infrastructure. There is a lack of knowledge about their behaviour when subjected to impulse and blast loads. The investigators will establish the most economical m ....Thin-walled Structures Subjected to Impact and Blast Loading. Terrorist attacks have cost Australians much human grief and billions of dollars. Containing the consequences of a blast or impact is crucial to survival and restricting damage to critical civilian/defence infrastructure. Thin-walled structures are used extensively in such infrastructure. There is a lack of knowledge about their behaviour when subjected to impulse and blast loads. The investigators will establish the most economical means of designing passive blast protection into thin-walled structures and hence, Australia's critical infrastructure. This knowledge will be transferred into design standards and Australia's limited defence resources.Read moreRead less
Investigation of Geopolymer based Concretes for the Construction of High Fire Risk Infrastructures. Geopolymer concretes are emerging new materials promising superior fire resistance and durability and potentially cheaper than the widely used high strength concretes, which also consume high levels of Portland cements. Production of 1 ton of Portland cement releases 1 ton of green house gases. Further, the 6.5 million tons/year of cement currently produced in Australia is insufficient to meet the ....Investigation of Geopolymer based Concretes for the Construction of High Fire Risk Infrastructures. Geopolymer concretes are emerging new materials promising superior fire resistance and durability and potentially cheaper than the widely used high strength concretes, which also consume high levels of Portland cements. Production of 1 ton of Portland cement releases 1 ton of green house gases. Further, the 6.5 million tons/year of cement currently produced in Australia is insufficient to meet the industry demand. This project investigates the use of fly ash to make geopolymer concrete, without using any Portland cement, to find usage for part of the 11 million tons/year of fly ash produced as a waste from coal power stations in Australia.Read moreRead less
Development of an Alkali Activated Slag based Construction Material for High Fire Risk Infrastructures. This project will develop an alkali-activated slag (AAS) based construction material for tunnel construction. In tunnels, conventional concretes are likely to 'spall' in a hydrocarbon fire accident, possibly resulting in a tunnel collapse. The project is set to develop a spalling-resistant AAS as an alternative to conventional Portland cement, which is responsible for 6.5 million tons of gre ....Development of an Alkali Activated Slag based Construction Material for High Fire Risk Infrastructures. This project will develop an alkali-activated slag (AAS) based construction material for tunnel construction. In tunnels, conventional concretes are likely to 'spall' in a hydrocarbon fire accident, possibly resulting in a tunnel collapse. The project is set to develop a spalling-resistant AAS as an alternative to conventional Portland cement, which is responsible for 6.5 million tons of greenhouse gas emissions in Australia per year, whereas AAS is based on slag, an industrial waste product. The project also seeks to provide better understanding of the spalling phenomenon so that the engineers can design fireproofing for conventional concrete tunnels with confidence.Read moreRead less