A Fundamental Study Of The Behaviour Of Clay Brick Fines In Autoclaved Calcium Silicate Based Building Products. Clay brick fines constitute a significant proportion of Construction and Demolition waste, the disposal of which is a recognised global problem. This project aims to provide a fundamental understanding of the behaviour of clay brick fines in autoclaved calcium silicate based building products. Current practice of manufacture of these widely produced building materials does not use cla ....A Fundamental Study Of The Behaviour Of Clay Brick Fines In Autoclaved Calcium Silicate Based Building Products. Clay brick fines constitute a significant proportion of Construction and Demolition waste, the disposal of which is a recognised global problem. This project aims to provide a fundamental understanding of the behaviour of clay brick fines in autoclaved calcium silicate based building products. Current practice of manufacture of these widely produced building materials does not use clay brick fines due to a lack of technical information on this renewable resource material. Findings of this study will provide a benchmark for the development of new generation building products worldwide utlilising clay brick fines.Read moreRead less
Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable ....Development of new-generation autoclaved cellulose fibre-cement composites using alumina-silica rich industrial waste. Autoclaved cellulose fibre-cement (FC) composites are used for construction purposes globally. Alumina-silica rich industrial waste, such as fired clay bricks and tiles, are proven to be highly reactive under autoclaving conditions and are generated in abundance either during the production process or demolition of buildings worldwide. The project aims to utilise this renewable waste for the manufacture of improved FC products. The successful outcomes of the project could allow a new range of cost-effective building products which need less energy for their manufacture, to be realised for both developed and developing countries.Read moreRead less
Effects of Phase Purity, Porosity and Oxygen Partial Pressure on the Thermal Stability of Nanolayered Ternary Carbides. The successful completion of this collaborative research will lead to (a) enhanced understanding of the roles of phase purity, porosity and atmosphere on the thermal stability of ternary carbides which is crucial for the design of high-performance ternary carbide heating elements; (b) fostering and strengthening of the continuing research collaboration between Curtin University ....Effects of Phase Purity, Porosity and Oxygen Partial Pressure on the Thermal Stability of Nanolayered Ternary Carbides. The successful completion of this collaborative research will lead to (a) enhanced understanding of the roles of phase purity, porosity and atmosphere on the thermal stability of ternary carbides which is crucial for the design of high-performance ternary carbide heating elements; (b) fostering and strengthening of the continuing research collaboration between Curtin University and the Institute of Metals Research; (c) development of high performance prototype ternary carbide heating elements for use in high temperature furnaces and ovens; and (d) potential joint ventures with local suppliers of furnaces in Australia and China, together with Kanthal of Sweden to assist in the manufacture of ternary carbide heating elements. Read moreRead less
Synthesis of Novel Nanostructured Ternary Carbide Composites. This research will lead to (a) new advances and provide contribution of new knowledge to the Priority Research Areas of Advanced Materials; (b) a novel vacuum heat-treatment process for nanostructured materials design. This will offer the ceramics industry in Australia a new technology for producing wear- and heat-resistant components for advanced engineering applications. (c) design of new layer-graded materials with a unique combina ....Synthesis of Novel Nanostructured Ternary Carbide Composites. This research will lead to (a) new advances and provide contribution of new knowledge to the Priority Research Areas of Advanced Materials; (b) a novel vacuum heat-treatment process for nanostructured materials design. This will offer the ceramics industry in Australia a new technology for producing wear- and heat-resistant components for advanced engineering applications. (c) design of new layer-graded materials with a unique combination of hardness for wear resistance and toughness for damage tolerance. This will enable the ceramics industry in Australia to compete internationally in the business of advanced and high performance ceramic products.Read moreRead less
Damage micromechanisms in alumina hybrid bilayers with graded interfaces. This project proposes a new design concept for high performance alumina hybrids with graded interfaces. The key to this process is the incorporation of thin graded interfaces between an outer homogeneous alumina layer for strength, hardness and wear resistance, and an inner heterogeneous alumina hybrid layer for damage tolerance. The project will explore unresolved issues concerning the effect of graded interfaces on the f ....Damage micromechanisms in alumina hybrid bilayers with graded interfaces. This project proposes a new design concept for high performance alumina hybrids with graded interfaces. The key to this process is the incorporation of thin graded interfaces between an outer homogeneous alumina layer for strength, hardness and wear resistance, and an inner heterogeneous alumina hybrid layer for damage tolerance. The project will explore unresolved issues concerning the effect of graded interfaces on the failure micromechanisms. Advances in this area will provide new strategy or insights for designing novel next generation layered materials.Read moreRead less
Evolution of Contact Damage in Layer Structures. Brittle layer structures (eg brittle coating on ceramic substrate) can be much more damage tolerant than their constituent material components - cracks tend to remain contained within the coating. Very little is known about the factors that control this behaviour. This project will exploit unique local expertise in modelling damage evolution to fill a niche in a large study being carried out at the National Institute of Standards (NIST) in the U ....Evolution of Contact Damage in Layer Structures. Brittle layer structures (eg brittle coating on ceramic substrate) can be much more damage tolerant than their constituent material components - cracks tend to remain contained within the coating. Very little is known about the factors that control this behaviour. This project will exploit unique local expertise in modelling damage evolution to fill a niche in a large study being carried out at the National Institute of Standards (NIST) in the U.S.A. An understanding of the factors that maximise the containment of cracks is essential to the design and development of the next generation of advanced layer composites for many biomechanical and other engineering applications.Read moreRead less
Grain-boundary sliding in high-temperature ceramics: mechanical spectroscopy of high-purity magnesium oxide. The demise of elastic behaviour in materials stressed at sufficiently high temperature limits the usefulness of ceramics for structural applications, and is also responsible for reduced wave speeds and associated attenuation of seismic waves in the Earth's interior. Yet the nature of the transition in fine-grained materials tested at high temperature from elastic through anelastic to vis ....Grain-boundary sliding in high-temperature ceramics: mechanical spectroscopy of high-purity magnesium oxide. The demise of elastic behaviour in materials stressed at sufficiently high temperature limits the usefulness of ceramics for structural applications, and is also responsible for reduced wave speeds and associated attenuation of seismic waves in the Earth's interior. Yet the nature of the transition in fine-grained materials tested at high temperature from elastic through anelastic to viscous rheology remains poorly understood. Through a combination of mechanical testing by torsional forced oscillation/ microcreep methods of carefully fabricated and characterised specimens of polycrystalline MgO and associated micro-mechanical modelling we seek to clarify this fundamental and general aspect of high-temperature mechanical behaviour.Read moreRead less
New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure. One of the main impediments to increased use of wrought magnesium is its characteristic but mediocre mechanical properties. The proposed work paves the way for new improved wrought magnesium alloys by determining how the constituent nano-structures, micro-structures and deformation conditions can be manipulated to control the evolution of properties during annealing. The project will deliver mathematical models describing th ....New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure. One of the main impediments to increased use of wrought magnesium is its characteristic but mediocre mechanical properties. The proposed work paves the way for new improved wrought magnesium alloys by determining how the constituent nano-structures, micro-structures and deformation conditions can be manipulated to control the evolution of properties during annealing. The project will deliver mathematical models describing the annealed microstructure and mechanical properties. The work will also explore the potential of a recent discovery made by the CI of a simple technique to randomise the alignment of the annealed atomic lattice structure, which promises to markedly improve formability.Read moreRead less
Modelling twinning transitions in light metals: a new foundation for alloy and process development. Australia's quest to become a world leader in light metals technology is being held back by a lack of quantitative understanding of the metallurgical behaviour of magnesium, which is the lightest engineering metal, and titanium, which is the strongest light metal. In particular, there is poor knowledge of the influence of material parameters on deformation twinning. This knowledge is vital for eff ....Modelling twinning transitions in light metals: a new foundation for alloy and process development. Australia's quest to become a world leader in light metals technology is being held back by a lack of quantitative understanding of the metallurgical behaviour of magnesium, which is the lightest engineering metal, and titanium, which is the strongest light metal. In particular, there is poor knowledge of the influence of material parameters on deformation twinning. This knowledge is vital for efficient production and optimised alloy and part design. This proposal aims to develop a quantitative understanding of transitions in twinning activation for improved performance in fatigue, crash behaviour, structural integrity, forming, forging, extruding, hot rolling and annealing.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0346882
Funder
Australian Research Council
Funding Amount
$296,000.00
Summary
A Micro-CT facility for non-destructive 3D X-ray microscopy of opaque materials. This project will establish a Micro-CT facility for non-destructive 3D X-ray microscopy of the internal structure of materials. The facility will support research from a broad spectrum of disciplines and extend regional microscopy and microanalysis capabilities. With a resolution of 1.8µm this instrument will provide 3D images with virtually no sample preparation. The range of materials that this applies to includes ....A Micro-CT facility for non-destructive 3D X-ray microscopy of opaque materials. This project will establish a Micro-CT facility for non-destructive 3D X-ray microscopy of the internal structure of materials. The facility will support research from a broad spectrum of disciplines and extend regional microscopy and microanalysis capabilities. With a resolution of 1.8µm this instrument will provide 3D images with virtually no sample preparation. The range of materials that this applies to includes minerals, wood, biomaterials, polymers, composites, archaeological ceramics and mummified tissue, and biological materials such as bone, teeth and coral. This facilitates research which had been considered too difficult because of the sample preparation needed to examine internal structure.
Read moreRead less