Ceramic matrix nanocomposites. Using a novel process developed by the applicant, this project will create and study ceramic matrix nanocomposites of two types: (i) those in which the nanoparticles are homogeneously distributed in alumina and (ii) functionally-graded nanocomposites of controlled heterogeneity, that is, nanocomposites in which the nanoparticles are distributed heterogeneously in glass. Homogeneous nanocomposites of alumina are potentially of great importance to the mining industry ....Ceramic matrix nanocomposites. Using a novel process developed by the applicant, this project will create and study ceramic matrix nanocomposites of two types: (i) those in which the nanoparticles are homogeneously distributed in alumina and (ii) functionally-graded nanocomposites of controlled heterogeneity, that is, nanocomposites in which the nanoparticles are distributed heterogeneously in glass. Homogeneous nanocomposites of alumina are potentially of great importance to the mining industry as they can increase the toughness and wear resistance of mining components. Heterogeneous nanocomposities have the potential to revolutionise the dental restoration industry by combining greatly increased toughness with the aesthetic benefit of controllable translucency.Read moreRead less
Green Machining of Powder Metallurgy Based Aluminium Composites. This project will initiate and establish a collaborative research program between Professor Wojciech Z. Misiolek of Lehigh University (Bethlehem, PA, USA) and Professor Graham Schaffer at The University of Queensland. Professor Misiolek will spend an extended six month period at The University of Queensland. The specific aim of the project is to develop a method to machine aluminium composites in the green, or unsintered, state. Th ....Green Machining of Powder Metallurgy Based Aluminium Composites. This project will initiate and establish a collaborative research program between Professor Wojciech Z. Misiolek of Lehigh University (Bethlehem, PA, USA) and Professor Graham Schaffer at The University of Queensland. Professor Misiolek will spend an extended six month period at The University of Queensland. The specific aim of the project is to develop a method to machine aluminium composites in the green, or unsintered, state. This will overcome a major impediment to the wider utilisation of aluminium matrix composites, which have an attractive combination of properties but cannot be formed into complex shapes using conventional processing methodologies.Read moreRead less
Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high qu ....Optimising paint adhesion to polymers. The Australian automotive export market (vehicles, parts, engines) is worth approximately $4,500 million p.a. and is a major employer in many areas. A reliable, cheap and efficient method for preparing polymer surfaces for painting will significantly benefit that market. The ability to manufacture quality, cheaper, lightweight parts improves the competitiveness of the local automotive industry. More importantly, a technology for production of cheap, high quality painted polymer surfaces vastly improves the competitiveness of local component manufacturers who supply to international vehicle manufacturers. This project falls under the National Research Priority Area 'Frontier Technologies for Building and Transforming Australian Industries'.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453480
Funder
Australian Research Council
Funding Amount
$236,899.00
Summary
Nanostructured Polymer Processing Network. The Nanostructured Polymer Processing Network will promote the understanding and manipulation of the processing of novel nanostructured plastic materials. High technology, online polymer processing equipment will be sought that will enable the design of nanostructured polymers via a range of techniques including insitu polymerisation, nanocomposites and polymer blending which are ideal for designing high value nanostructured polymers that are tailored f ....Nanostructured Polymer Processing Network. The Nanostructured Polymer Processing Network will promote the understanding and manipulation of the processing of novel nanostructured plastic materials. High technology, online polymer processing equipment will be sought that will enable the design of nanostructured polymers via a range of techniques including insitu polymerisation, nanocomposites and polymer blending which are ideal for designing high value nanostructured polymers that are tailored for high performance applications. The equipment in this proposal, when combined with existing leading edge polymer characterisation and analysis equipment, will provide a Network with international state-of-the-art equipment that will fast track the success of integrated research projects across the sites.Read moreRead less
Damage micromechanisms in alumina hybrid bilayers with graded interfaces. This project proposes a new design concept for high performance alumina hybrids with graded interfaces. The key to this process is the incorporation of thin graded interfaces between an outer homogeneous alumina layer for strength, hardness and wear resistance, and an inner heterogeneous alumina hybrid layer for damage tolerance. The project will explore unresolved issues concerning the effect of graded interfaces on the f ....Damage micromechanisms in alumina hybrid bilayers with graded interfaces. This project proposes a new design concept for high performance alumina hybrids with graded interfaces. The key to this process is the incorporation of thin graded interfaces between an outer homogeneous alumina layer for strength, hardness and wear resistance, and an inner heterogeneous alumina hybrid layer for damage tolerance. The project will explore unresolved issues concerning the effect of graded interfaces on the failure micromechanisms. Advances in this area will provide new strategy or insights for designing novel next generation layered materials.Read moreRead less
Development of PVC-Based Polymer Nanocomposites. The aim of the project is to develop a PVC polymer nanocomposite material to be used in water pipelines. It has been found that the inclusion of a nanoparticle phase, in this case calcium carbonate, leads to increases in strength, stiffness, toughness and abrasion resistance. This proposed project will develop and assess an optimum material in addition to investigating the mechanisms of deformation.
Design and synthesis of transparent conducting metal oxides. With advances in solar cell and flexible display technologies the demand and performance requirements for transparent conductors used as electrodes in these devices will increase dramatically. This research program is focused on developing new materials to meet the demand and the challenges of new, more advanced technologies. The project has the potential to generate valuable intellectual property in the form of new generation transpar ....Design and synthesis of transparent conducting metal oxides. With advances in solar cell and flexible display technologies the demand and performance requirements for transparent conductors used as electrodes in these devices will increase dramatically. This research program is focused on developing new materials to meet the demand and the challenges of new, more advanced technologies. The project has the potential to generate valuable intellectual property in the form of new generation transparent conducting oxide materials for a rapidly growing set of applications. The new devices will directly improve our standard of living and additional economic benefits will come from commercialisation of the technology both here and overseas.Read moreRead less
Development of Ultrafine Aluminium Matrix Composites for Automotive Applications. This project aims at developing aluminium matrix composites using flyash, a waste product from power stations, for automotive applications. It introduces innovative processing and a new generation of metal matrix composites (MMCs) containing ultrafine ceramic particles. These MMCs will be tailored for selected applications such as disc brake rotors and drums. It is expected that an integrated system for processi ....Development of Ultrafine Aluminium Matrix Composites for Automotive Applications. This project aims at developing aluminium matrix composites using flyash, a waste product from power stations, for automotive applications. It introduces innovative processing and a new generation of metal matrix composites (MMCs) containing ultrafine ceramic particles. These MMCs will be tailored for selected applications such as disc brake rotors and drums. It is expected that an integrated system for processing MMCs and forming components be developed and prototype automotive parts produced. The results will lead to further collaborations with automotive parts suppliers in Australia and overseas to develop commercial products and enhance the export capability of the industry.Read moreRead less
Development of Deformation-Mechanism Based Parameters for Improved Design of Hard Coatings. The use of thin hard abrasion-resistant coatings is an important method for significantly improving the operational lifetime of components in a wide range of mechanical, biomedical and sensory applications. The optimal design of these coatings is however severely restricted by a lack of detailed knowledge of their material deformation mechanisms. The proposed project will use novel nano-indentation and el ....Development of Deformation-Mechanism Based Parameters for Improved Design of Hard Coatings. The use of thin hard abrasion-resistant coatings is an important method for significantly improving the operational lifetime of components in a wide range of mechanical, biomedical and sensory applications. The optimal design of these coatings is however severely restricted by a lack of detailed knowledge of their material deformation mechanisms. The proposed project will use novel nano-indentation and electron microscope techniques to create a basis for mechanism-based deformation models. These models will then be used to develop new coating architectures with improved operational lifetimes as well as predicting coating lifetimes and developing simple tools for coating assessment.Read moreRead less