Application of artificial neural network in flood emergency decision support system. This project will develop a method for rapid estimation of flood water levels. This will increase the warning time for flood evacuation in small coastal catchments where traditional estimating techniques are too time-consuming.
Boosting up Productivity: Optimizing Scaffolding Life Cycle Management with Virtual Design and Construction. Scaffolding management can be critical to construction industries across oil and gas, building, and infrastructure sectors. It can lead to low productivity and safety due to static and poor planning. This project aims to innovatively integrate a decision support system, virtual design and construction, and onsite monitoring into one dynamic planning system to significantly lift productivi ....Boosting up Productivity: Optimizing Scaffolding Life Cycle Management with Virtual Design and Construction. Scaffolding management can be critical to construction industries across oil and gas, building, and infrastructure sectors. It can lead to low productivity and safety due to static and poor planning. This project aims to innovatively integrate a decision support system, virtual design and construction, and onsite monitoring into one dynamic planning system to significantly lift productivity. The emphasis is on producing optimal solutions for planning, design, erection, monitoring, dismantling, and relocation of scaffolding, so that productivity is maximised subject to satisfying required cost and safety constraints. The project aims to therefore secure long-term economic benefits by improving productivity and enhancing project performance.Read moreRead less
Transforming liquefied
natural gas (LNG) plant construction productivity through mobile computing technologies. Australia's liquefied natural gas (LNG) construction industry is plagued by major cost blowouts. This project will investigate a new mobile computing approach for streamlining LNG construction projects, thus yielding significant productivity gains.
Discovery Early Career Researcher Award - Grant ID: DE200101079
Funder
Australian Research Council
Funding Amount
$426,241.00
Summary
Safe distractions? Taking the danger out of competing activities. Distracted driving is an increasing safety concern in Australia and worldwide. Smartphones play key roles in today’s professional and social contexts and current road safety policies based on stopping their use while driving have shown little success. Distraction is predicted to be an even greater issue in new semi-automated vehicles. This project proposes an innovative approach that will enable safe engagement in competing tasks ....Safe distractions? Taking the danger out of competing activities. Distracted driving is an increasing safety concern in Australia and worldwide. Smartphones play key roles in today’s professional and social contexts and current road safety policies based on stopping their use while driving have shown little success. Distraction is predicted to be an even greater issue in new semi-automated vehicles. This project proposes an innovative approach that will enable safe engagement in competing tasks while driving non-automated and semi-automated vehicles. The outcomes will underpin the development of new technologies to reduce the potential adverse effects of these distractions and thus reduce deaths and serious injuries, representing significant cost savings to the health system and the community.Read moreRead less
The Development of a Hybrid Energy Simulation Model for Masonry Enclosures. This project aims to develop and validate a hybrid energy simulation model for assessing the thermal performance of masonry enclosures. The model will combine the zonal and computational fluid dynamics modelling techniques into a fully integrated computational tool. Once validated, the proposed model will be employed to evaluate the thermal performance of a wide range of wall designs taking into account the Australian cl ....The Development of a Hybrid Energy Simulation Model for Masonry Enclosures. This project aims to develop and validate a hybrid energy simulation model for assessing the thermal performance of masonry enclosures. The model will combine the zonal and computational fluid dynamics modelling techniques into a fully integrated computational tool. Once validated, the proposed model will be employed to evaluate the thermal performance of a wide range of wall designs taking into account the Australian climatic conditions, construction practices and typical residential developments. The results will be then employed to modify and refine the existing wall designs and develop optimum masonry walling system(s) that are well suited for the Australian climatic conditions.Read moreRead less
Experimental Modelling of Masonry Buildings' Thermal Performance. Mathematical modelling of the thermal performance of buildings has been identified as one of the key technologies necessary for designing energy-efficient buildings. The aim of this project is to develop an experimental model of the thermal response of typical masonry enclosures by establishing relationships between input and output measurements from several full-scale test houses rather than relying on conservation principles. On ....Experimental Modelling of Masonry Buildings' Thermal Performance. Mathematical modelling of the thermal performance of buildings has been identified as one of the key technologies necessary for designing energy-efficient buildings. The aim of this project is to develop an experimental model of the thermal response of typical masonry enclosures by establishing relationships between input and output measurements from several full-scale test houses rather than relying on conservation principles. Once validated, the proposed model will be employed to evaluate the thermal performance of a wide range of walling systems. This should lead to an improved understanding of mechanisms influencing the thermal behaviour of masonry enclosures under Australian climatic conditions.Read moreRead less
Smart Utilisation of Thermal Mass in Masonry Buildings. This study will help determine the effectiveness of a range of novel technologies for smart utilisation of thermal mass in masonry buildings. The ultimate goal is to improve the thermal performance of such constructions. The project focuses on the National Research Priority 3 because of the novel and advanced technological nature of the proposed research. The project has also a significant potential in contributing to the Federal Government ....Smart Utilisation of Thermal Mass in Masonry Buildings. This study will help determine the effectiveness of a range of novel technologies for smart utilisation of thermal mass in masonry buildings. The ultimate goal is to improve the thermal performance of such constructions. The project focuses on the National Research Priority 3 because of the novel and advanced technological nature of the proposed research. The project has also a significant potential in contributing to the Federal Government's effort in the Research Priority 1 because achieving better thermal efficiency in buildings will undoubtedly help to minimise electricity usage leading to a reduction in CO2 emissions.Read moreRead less
Optimising Decentralised Membrane Bioreactors for Water Reuse. Water is a critical resource in Australia and as pressures on water resources increase, water recycling has emerged as an important component of water management practises throughout Australia. Decentralised wastewater treatment systems (or package plants) offer opportunities for water recycling in regional communities; however this application is limited by our understanding on the removal of contaminants of concern through these tr ....Optimising Decentralised Membrane Bioreactors for Water Reuse. Water is a critical resource in Australia and as pressures on water resources increase, water recycling has emerged as an important component of water management practises throughout Australia. Decentralised wastewater treatment systems (or package plants) offer opportunities for water recycling in regional communities; however this application is limited by our understanding on the removal of contaminants of concern through these treatment systems. This project will assess the suitability and efficiency of decentralised membrane bioreactors (MBRs) for the removal of endocrine disrupting chemicals (EDCs), pharmaceutically active compounds (PhACs) and pathogens in accordance with the 2006 National Guidelines for Water Recycling.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0883080
Funder
Australian Research Council
Funding Amount
$490,000.00
Summary
Detection of Trace Concentrations of Chemical Contaminants in Urban Water Systems. Water is a critical resource in Australia and as pressures on water resources increase, water recycling is becoming more prevalent. The presence of chemical contaminants such as low concentrations (ng/L) of pharmaceutically active compounds (PhACs), endocrine disrupters (EDCs) and other organic micropollutants in the aquatic environment has received much attention around the world including Australia due to their ....Detection of Trace Concentrations of Chemical Contaminants in Urban Water Systems. Water is a critical resource in Australia and as pressures on water resources increase, water recycling is becoming more prevalent. The presence of chemical contaminants such as low concentrations (ng/L) of pharmaceutically active compounds (PhACs), endocrine disrupters (EDCs) and other organic micropollutants in the aquatic environment has received much attention around the world including Australia due to their potential biological impact in urban water systems. The proposed equipment aims to establish analytical techniques and instrumental capacity for the selective analysis of chemical contaminants in order to improve our understanding of the fate of these compounds through different urban water systems.Read moreRead less
Optimising dissolved air flotation (DAF) for algae removal by bubble modification in drinking water and advanced wastewater systems. Algal blooms in potable water reservoirs and advanced wastewater treatment lagoons can impact the performance and economic viability of water treatment processes resulting in taste and odour episodes and the risk of algal toxins as well as causing further limitation to already stressed water resources in Australia. This project aims to develop an adaptation of the ....Optimising dissolved air flotation (DAF) for algae removal by bubble modification in drinking water and advanced wastewater systems. Algal blooms in potable water reservoirs and advanced wastewater treatment lagoons can impact the performance and economic viability of water treatment processes resulting in taste and odour episodes and the risk of algal toxins as well as causing further limitation to already stressed water resources in Australia. This project aims to develop an adaptation of the dissolved air flotation process that is already used for algae treatment that will provide a more robust, economic and sustainable barrier to algal cells in accordance with the Australian Drinking and Recycled Water Guidelines.Read moreRead less