Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0347464
Funder
Australian Research Council
Funding Amount
$100,000.00
Summary
Setting up an integrated wirebonding and testing facility for MEMS applications. This project intends to setup an integrated wire bonding and testing facility suitable for Micro electromechanical systems (MEMS) applications. Wire bonding is an essential step for making the contacts of any micro device with external power supply or signal conditioning circuitry. The contact pads for such devices vary in size from 0.050 mm x 0.050 mm to few 100s of micrometers. The proposed facility will be requi ....Setting up an integrated wirebonding and testing facility for MEMS applications. This project intends to setup an integrated wire bonding and testing facility suitable for Micro electromechanical systems (MEMS) applications. Wire bonding is an essential step for making the contacts of any micro device with external power supply or signal conditioning circuitry. The contact pads for such devices vary in size from 0.050 mm x 0.050 mm to few 100s of micrometers. The proposed facility will be required for making contacts either using thermal or ultrasonic methods with complete automatic stages. The electrical contacts are used to drive or monitor MEMS, Polymer micro devices and nano- fluidic systems. This facility will be used for different applications including photonics and communication devices (RMIT), flexi circuits and microwave devices (DSTO) and micro/nano fluidic systems (SUT). This will be the only advanced integrated facility in Victoria, which will have the wire bonding(ball & wedge), die bonding and bond testing facilities together.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0238960
Funder
Australian Research Council
Funding Amount
$940,000.00
Summary
High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which wi ....High Performance Semiconductor Micromachining Facility. The purpose of this project is to make available to the Australian semiconductor research community a facility to undertake specialist deposition and etching tasks needed for fabrication of next generation solar cells, microelectronics, optronics, and micro-electromechanical systems. The facility will have the flexibility to allow independent control of major process parameters, allowing development of new fabrication technologies which will be generic to a wide range of semiconductor materials. In particular, the facility will be unique in its ability to perform processes at low temperatures, and under conditions that allow optimisation of the deposition and etching processes, without compromising the performance of delicate devices or exceeding the maximum process temperature limitations found in many mainstream semiconductor materials technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0775499
Funder
Australian Research Council
Funding Amount
$130,000.00
Summary
High Performance Optical Profilometer for mapping micro/meso/macroscopic topography. Developing advanced, high performance new materials requires an understanding of surfaces and interfaces. Making a small area, low yield material or device is a regular occurrence within the Australian research community. The ability to create reproducible, high yield materials requires greater understanding of the stresses, uniformities and deformations in a material over large areas. The proposed instrument ....High Performance Optical Profilometer for mapping micro/meso/macroscopic topography. Developing advanced, high performance new materials requires an understanding of surfaces and interfaces. Making a small area, low yield material or device is a regular occurrence within the Australian research community. The ability to create reproducible, high yield materials requires greater understanding of the stresses, uniformities and deformations in a material over large areas. The proposed instrument can measure topography over many centimeters-squared with sub-micron spatial resolution, currently beyond the capabilities of researchers in Australia. By providing a quantitative method to measure surface textures, the instrument will also support Australian industries looking for improved process control.Read moreRead less
Development of inert gas ion beams for fabrication of nano-structures. This project will develop a high brightness, high density ion beam for reactive fabrication of structures with dimensions of the order of and less than 100 nano-metres. Present systems use liquid metal ion sources which can pollute the substrates being fabricated. Use of inert gas ions will overcome this problem and lead to a new type of ion source to replace the older systems. Added advantages include significantly increased ....Development of inert gas ion beams for fabrication of nano-structures. This project will develop a high brightness, high density ion beam for reactive fabrication of structures with dimensions of the order of and less than 100 nano-metres. Present systems use liquid metal ion sources which can pollute the substrates being fabricated. Use of inert gas ions will overcome this problem and lead to a new type of ion source to replace the older systems. Added advantages include significantly increased lifetime much higher reproducibility. Our commercial collaborator, FEI Company, estimate the world market as being $US100,000,000 and will actively promote this technology worldwide when it is fully developed.Read moreRead less
Fundamental electronic transport in emerging one-dimensional nanoelectronic devices. This project aims to understand the mechanisms limiting electronic transport in one-dimensional nanoelectronic devices and structures at temperatures relevant for practical device operation. One-dimensional nanoelectronic devices will be the building blocks of future technological innovation. This project will use a characterisation approach, numerical modelling and simulation, which promise to deliver knowledge ....Fundamental electronic transport in emerging one-dimensional nanoelectronic devices. This project aims to understand the mechanisms limiting electronic transport in one-dimensional nanoelectronic devices and structures at temperatures relevant for practical device operation. One-dimensional nanoelectronic devices will be the building blocks of future technological innovation. This project will use a characterisation approach, numerical modelling and simulation, which promise to deliver knowledge and analysis tools for ongoing innovation and optimisation in semiconductor nanoelectronics.Read moreRead less
ADVANCED PHYSICS AND CHARACTERISATION OF SILICON MATERIALS AND DEVICES. Silicon, the semiconductor material that has revolutionised modern society through Microelectronics, is also at the centre of Photovoltaics, the technology that permits harvesting the energy from the sun to improve the quality of life and sustain it beyond the limitations of fossil fuel resources. By improving our understanding of the fundamental properties of silicon and advancing the solar cell devices made from it, this p ....ADVANCED PHYSICS AND CHARACTERISATION OF SILICON MATERIALS AND DEVICES. Silicon, the semiconductor material that has revolutionised modern society through Microelectronics, is also at the centre of Photovoltaics, the technology that permits harvesting the energy from the sun to improve the quality of life and sustain it beyond the limitations of fossil fuel resources. By improving our understanding of the fundamental properties of silicon and advancing the solar cell devices made from it, this project aims to increase Australia's presence in the vast field of Microlectronics and maintain its leading position in solar energy technologies.Read moreRead less
Improving silicon grain boundaries by linking electronic material quality and device manufacturing conditions. This project develops our recent findings for improving silicon grain boundaries in electronic devices such as cheap solar cells, active matrix displays, thin-film transistors, etc. The performance of such devices and their applications have been limited mainly because no simple link between manufacturing conditions and device quality has been found. However, we recently verified a phys ....Improving silicon grain boundaries by linking electronic material quality and device manufacturing conditions. This project develops our recent findings for improving silicon grain boundaries in electronic devices such as cheap solar cells, active matrix displays, thin-film transistors, etc. The performance of such devices and their applications have been limited mainly because no simple link between manufacturing conditions and device quality has been found. However, we recently verified a physical model description of grain boundaries on a broad range of devices, and this allows us to find such a link and to address prevailing problems from a new perspective. This will improve both the understanding and the manufacturing of such devices.Read moreRead less
Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aim ....Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aims to develop an implant isolation scheme for a new class of devices developed by Epitactix, an Australian start-up company founded on CSIRO research. This will be achieved by combining the ANU's experience and expertise in ion-irradiation and defect engineering with the device and processing expertise of Epitactix Pty Ltd.Read moreRead less
Power systems with diverse generation - implications, control and capability. This research will generate a systematic methodology to handle the impact of the renewable energy sources on the NSW power grid. It increases our understanding of the impact of climate change policies relating to mandatory targets for greenhouse gas reduction helping to build Australia’s research capacity in the national priority area of an environmentally sustainable Australia. The anticipated methodology can also be ....Power systems with diverse generation - implications, control and capability. This research will generate a systematic methodology to handle the impact of the renewable energy sources on the NSW power grid. It increases our understanding of the impact of climate change policies relating to mandatory targets for greenhouse gas reduction helping to build Australia’s research capacity in the national priority area of an environmentally sustainable Australia. The anticipated methodology can also be seen as protecting the security of power infrastructure as well. Maintaining a critical energy infrastructure protects our way of life and ensures ongoing social, economic and environmental well being of Australia.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100233
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Characterisation of infrared imaging technologies. This project aims to establish a facility for two-dimensional (2D) infrared sensor array testing and prototyping. Systematic characterisation and prototyping of 2D imaging arrays is vital in showcasing and realising Australia's innovation and research investment in photodetector technologies. This facility will enable research on 2D imaging arrays, such as pixel yield and cross-talk, device reliability physics, failure mechanisms, noise and long ....Characterisation of infrared imaging technologies. This project aims to establish a facility for two-dimensional (2D) infrared sensor array testing and prototyping. Systematic characterisation and prototyping of 2D imaging arrays is vital in showcasing and realising Australia's innovation and research investment in photodetector technologies. This facility will enable research on 2D imaging arrays, such as pixel yield and cross-talk, device reliability physics, failure mechanisms, noise and long-term stability. The facility will demonstrate Australia's innovative imaging technologies, applicable in science, industry, defence and security, attracting interest from both Australian and international industries.Read moreRead less