Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to b ....Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to be optimised for minimum environmental impact. Utilisation of the model should significantly shape an organisations’ strategic planning, while a recognised high Green-star status from Green Building Council of Australia will improve their reputation and bring benefits to the construction industry.Read moreRead less
Managing Hydrate Formation for Viable CO2 and Energy Transport. Increasing the allowable water content during the pipeline transportation of carbon dioxide (CO2) would greatly increase the viability of carbon capture and storage but would also increase the risk of CO2-hydrate blockages. Subsea methane (CH4) hydrate sediments represent a tremendous new energy resource if blockages in production pipelines can be avoided. Conventional oil industry approaches to hydrate avoidance are of limited rele ....Managing Hydrate Formation for Viable CO2 and Energy Transport. Increasing the allowable water content during the pipeline transportation of carbon dioxide (CO2) would greatly increase the viability of carbon capture and storage but would also increase the risk of CO2-hydrate blockages. Subsea methane (CH4) hydrate sediments represent a tremendous new energy resource if blockages in production pipelines can be avoided. Conventional oil industry approaches to hydrate avoidance are of limited relevance and too expensive for these new applications. Formation probability distributions, cohesive forces and agglomeration tendencies of CO2 and CH4 hydrates are intended to be measured and integrated into predictive multi-phase flow models, enabling quantitative risk assessments of blockages in CO2 transport or hydrate production pipelines.Read moreRead less
Modelling and testing corroding reinforced concrete structures. The project aims to develop models and methods to enable the early detection of active steel corrosion. Most of Australia’s critical infrastructure is located on or near the coast in high saline conditions and is exposed to a high risk of reinforcing steel corrosion. Our ability to design and monitor such structures is crucial. The first part of the project aims to develop an innovative finite element model to improve the prediction ....Modelling and testing corroding reinforced concrete structures. The project aims to develop models and methods to enable the early detection of active steel corrosion. Most of Australia’s critical infrastructure is located on or near the coast in high saline conditions and is exposed to a high risk of reinforcing steel corrosion. Our ability to design and monitor such structures is crucial. The first part of the project aims to develop an innovative finite element model to improve the prediction of both active steel reinforcement corrosion and the time to concrete cracking in a chloride environment. It then plans to develop a non-destructive method, combining ultrasonic waves-based technology and acoustic emission, to detect active steel corrosion before any damage is visible on the structure.Read moreRead less
Smart utilisation of cobaltite based electrodes on solid oxide fuel cells. This project aims to develop solid oxide fuel cell technologies with significantly simplified fabrication steps and at low cost. It aims to generate fundamental knowledge on the polarisation induced electrode/electrolyte interfaces under fuel cell operation conditions. The advanced fuel cell technologies will in turn substantially increase the energy conversion efficiency and provide significant benefit in the reduction o ....Smart utilisation of cobaltite based electrodes on solid oxide fuel cells. This project aims to develop solid oxide fuel cell technologies with significantly simplified fabrication steps and at low cost. It aims to generate fundamental knowledge on the polarisation induced electrode/electrolyte interfaces under fuel cell operation conditions. The advanced fuel cell technologies will in turn substantially increase the energy conversion efficiency and provide significant benefit in the reduction of greenhouse emission.Read moreRead less
Single-atom catalysts for electrochemical carbon dioxide conversion. This project aims to develop a new synthetic technique for the fabrication of template-free and metal single-atoms embedded in doped carbon nano tubes. It will generate fundamental knowledge about multiple proton and electron transfer steps in carbon dioxide (CO2RR) using in-situ synchrotron characterisation techniques. Expected outcomes of the research include the development of new single-atom catalysts for production of the ....Single-atom catalysts for electrochemical carbon dioxide conversion. This project aims to develop a new synthetic technique for the fabrication of template-free and metal single-atoms embedded in doped carbon nano tubes. It will generate fundamental knowledge about multiple proton and electron transfer steps in carbon dioxide (CO2RR) using in-situ synchrotron characterisation techniques. Expected outcomes of the research include the development of new single-atom catalysts for production of the key feed-stock of CO for sustainable use in hydrocarbon fuels, providing significant benefits in the reduction of greenhouse emissions.Read moreRead less
A direct drive linear tube generator for ocean wave energy conversion. This project aims to investigate a direct drive linear electromagnetic generator system for the maximum wave energy conversion and frequency bandwidth. This system has a translator of a multiple degree of freedom non-linear oscillator system built with the Halbach ring array pattern and ferro-fluid bearings. To establish wave energy conversion science, this project will investigate the device, its integration with a buoy stru ....A direct drive linear tube generator for ocean wave energy conversion. This project aims to investigate a direct drive linear electromagnetic generator system for the maximum wave energy conversion and frequency bandwidth. This system has a translator of a multiple degree of freedom non-linear oscillator system built with the Halbach ring array pattern and ferro-fluid bearings. To establish wave energy conversion science, this project will investigate the device, its integration with a buoy structure under wave loadings and automatic control of power conversion and conditioning. The outcome could meet demands for wave energy conversion technologies that reduce power generation cost and emissions, benefiting the Australian economy and environment.Read moreRead less
Next generation gas separations via innovative adsorption technologies. This project aims to develop new gas separation technologies that combine novel materials and pressure swing adsorption cycles to deliver inexpensive industrial processes capable of both high recovery and high purity products. The project will advance our ability to manipulate the phenomenon of regulated guest admission into microporous materials, and integrate such materials within new types of dual-reflux adsorption cycles ....Next generation gas separations via innovative adsorption technologies. This project aims to develop new gas separation technologies that combine novel materials and pressure swing adsorption cycles to deliver inexpensive industrial processes capable of both high recovery and high purity products. The project will advance our ability to manipulate the phenomenon of regulated guest admission into microporous materials, and integrate such materials within new types of dual-reflux adsorption cycles that deliver multiple refined gas products. Successful implementation of these industrial developments will increase Australia's access to cheap supplies of natural gas, encourage the broader use of biomass, lower the carbon emissions of industrial processes, and efficiently recover high-value compounds only present at trace concentrations.Read moreRead less