Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560850
Funder
Australian Research Council
Funding Amount
$295,320.00
Summary
Scanning Cathodoluminescence Microscopy and Spectroscopy Facility. Cathodoluminescence (CL), the emission of light during electron irradiation, has emerged as a unique analytical tool to characterise luminescence centres and study luminescence mechanisms in technologically important materials at the nano-scale. The main aim of this project is to establish a state-of-the-art scanning CL microscopy and spectroscopy facility in Australia. The facility will enable high spatial resolution CL analysis ....Scanning Cathodoluminescence Microscopy and Spectroscopy Facility. Cathodoluminescence (CL), the emission of light during electron irradiation, has emerged as a unique analytical tool to characterise luminescence centres and study luminescence mechanisms in technologically important materials at the nano-scale. The main aim of this project is to establish a state-of-the-art scanning CL microscopy and spectroscopy facility in Australia. The facility will enable high spatial resolution CL analysis of technologically important semiconductors and novel nano-structured materials, e.g. quantum dots and ceramic nano-crystals. These studies will facilitate a deeper understanding of the physics of light emission from nano-structured materials and enable the fabrication of higher quality opto-electronic materials.Read moreRead less
New multiplexed optical read-out technologies for micromachined cantilever sensor arrays. Passive sensing of chemical and biological agents is an essential capability in fields as diverse as national security, agriculture, mining and medicine. In many cases, generic sensing (e.g. are there pesticides present) as well as specific sensing (which pesticide) are both important. While sensors based on micro-electromechanical systems (MEMS) have shown extremely high performance at low cost, they have ....New multiplexed optical read-out technologies for micromachined cantilever sensor arrays. Passive sensing of chemical and biological agents is an essential capability in fields as diverse as national security, agriculture, mining and medicine. In many cases, generic sensing (e.g. are there pesticides present) as well as specific sensing (which pesticide) are both important. While sensors based on micro-electromechanical systems (MEMS) have shown extremely high performance at low cost, they have been limited to detection of a specific substance. Success in this project will make low cost generic MEMS-based sensors a reality, allowing, for the first time, wide-spread use of sensitive sensing systems in applications such as farming, container transport security, general medical practice and national security.Read moreRead less
Fabrication of robust nanoscale optical biosensors using the novel spinning disc reactor technology. Spinning Disc Reactor (SDR) technology is new to Australia and will have wide ranging applications in nano-technology, and is destined to attract significant industrial interest beyond the proposed application in nano-scale biosensors. SDR is based on continuous flow and is more benign (less chemical waste) than traditional batch technology with a smaller footprint and significantly reduced capit ....Fabrication of robust nanoscale optical biosensors using the novel spinning disc reactor technology. Spinning Disc Reactor (SDR) technology is new to Australia and will have wide ranging applications in nano-technology, and is destined to attract significant industrial interest beyond the proposed application in nano-scale biosensors. SDR is based on continuous flow and is more benign (less chemical waste) than traditional batch technology with a smaller footprint and significantly reduced capital outlay. The emergence of SDR technology will revolutionize the practice of nano-engineering leading to miniaturization of devices, advances in information technologies and intelligent systems, and the revolution in medical science. The exciting research will enhance public opinion towards science.Read moreRead less
ARC Centre of Excellence - Centre for Antimatter-Matter Studies. While our world is made of matter, all particles have anti-particles and the most abundant is the positron, the electron's antiparticle. It is the "workshop" for most anti-matter studies, particularly for the characterization of materials, including gases, polymers, insulators, thin films and surfaces, as well as the development of new and novel, nano-structured materials. The ARC Centre of Excellence in Antimatter-Matter Studies ....ARC Centre of Excellence - Centre for Antimatter-Matter Studies. While our world is made of matter, all particles have anti-particles and the most abundant is the positron, the electron's antiparticle. It is the "workshop" for most anti-matter studies, particularly for the characterization of materials, including gases, polymers, insulators, thin films and surfaces, as well as the development of new and novel, nano-structured materials. The ARC Centre of Excellence in Antimatter-Matter Studies (CAMS) will bring together key Australian and international scientists to work in this emerging scientific field of antimatter-matter interactions. It will forge a unique and effective scientific team for state-of-the-art studies of the nano-world that underlies many everyday processes and new technologies.Read moreRead less
Acoustic observation of Antarctic ice rifting and calving events using remote hydroacoustic listening stations. The calving activity of the Antarctic ice shelves is one of the major indicators of global climate change. Global warming induced by an increase in atmospheric CO2 will affect the Antarctic Ice Sheet, primarily in form of disintegration of the Antarctic ice shelves surrounding the continent. The processes of calving on the ice shelves may lead to a substantial increase of sea level aro ....Acoustic observation of Antarctic ice rifting and calving events using remote hydroacoustic listening stations. The calving activity of the Antarctic ice shelves is one of the major indicators of global climate change. Global warming induced by an increase in atmospheric CO2 will affect the Antarctic Ice Sheet, primarily in form of disintegration of the Antarctic ice shelves surrounding the continent. The processes of calving on the ice shelves may lead to a substantial increase of sea level around the world, with devastating effects on the continental coasts and low-lying islands. The method of remote acoustic observations investigated in this project is a new approach to the problem of creating an efficient and cost effective system to monitor rifting and calving of the Antarctic ice shelves. Read moreRead less
Rapid structural condition assessment using adaptive model updating. The proposed project has potential to significantly enhance the accuracy with which the condition (and hence load bearing capacity) of existing infrastructure can be determined. By providing a technique of model updating that can be applied effectively in real time, location of damage will be able to be determined accurately. Economic benefits will be reaped, both through saving infrastructure from demolition where the conditio ....Rapid structural condition assessment using adaptive model updating. The proposed project has potential to significantly enhance the accuracy with which the condition (and hence load bearing capacity) of existing infrastructure can be determined. By providing a technique of model updating that can be applied effectively in real time, location of damage will be able to be determined accurately. Economic benefits will be reaped, both through saving infrastructure from demolition where the condition is found to be adequate, and by replacing or repairing inadequate structures before costly failure occurs. This is particularly important as much of Australia's infrastructure is aging, and unnecessary periodic replacement of infrastructure is not sustainable.Read moreRead less
Blast Damage and Fragmentation Prediction for Occupants and Structure Protection. Protecting infrastructures against blast loads from terrorist bombing or accidental explosion is a challenge. Researchers have been working on developing a numerical model, but the progress is slow owing to difficulties in modelling nonlinear and high strain rate damage process. Most blast effect assessment is based on empirical relations from blast tests. These have been demonstrated not necessarily yielding accur ....Blast Damage and Fragmentation Prediction for Occupants and Structure Protection. Protecting infrastructures against blast loads from terrorist bombing or accidental explosion is a challenge. Researchers have been working on developing a numerical model, but the progress is slow owing to difficulties in modelling nonlinear and high strain rate damage process. Most blast effect assessment is based on empirical relations from blast tests. These have been demonstrated not necessarily yielding accurate prediction owing to variations of structural properties from the test model. A reliable numerical model is therefore important. It will result in big savings from blast tests, and better prediction of blast effects for structure and occupant protection. It will have applications in civil, mining and defence engineering. Read moreRead less
NUMERICAL ANALYSIS OF DYNAMIC REPONSE AND DAMAGE OF FRAME STRUCTURES TO EXPLOSIVE LOADS. Understanding structural response to explosive loads is essential to protect critical infrastructure against terrorist bombing or industrial explosions. Current practice in analysis and design of structures to withstand explosive loads uses either empirical methods or a simplified structure model. In many cases, engineers need to know the structure response in more detail in order to protect the structure an ....NUMERICAL ANALYSIS OF DYNAMIC REPONSE AND DAMAGE OF FRAME STRUCTURES TO EXPLOSIVE LOADS. Understanding structural response to explosive loads is essential to protect critical infrastructure against terrorist bombing or industrial explosions. Current practice in analysis and design of structures to withstand explosive loads uses either empirical methods or a simplified structure model. In many cases, engineers need to know the structure response in more detail in order to protect the structure and plan evacuation procedures. This project will study the response and damage mechanism of structures to explosive loads, and develop a numerical model to predict structural response and damage. It will have immediate and wide-ranging applications in defence, construction and mining engineering.Read moreRead less
PROBABILISTIC BRIDGE STRUCTURE CONDITION ASSESSMENT AND LOAD CARRYING CAPACITY PREDICTION. Bridge failures have occasionally been reported around the world. Condition assessment of bridges is vital to maintain their safety. It is difficult to assess quantitatively the deterioration and damage using traditional methods. Vibration-based methods are very sensitive to noise in vibration measurement and error in finite element modelling. This project will study the effects of measurement noises and f ....PROBABILISTIC BRIDGE STRUCTURE CONDITION ASSESSMENT AND LOAD CARRYING CAPACITY PREDICTION. Bridge failures have occasionally been reported around the world. Condition assessment of bridges is vital to maintain their safety. It is difficult to assess quantitatively the deterioration and damage using traditional methods. Vibration-based methods are very sensitive to noise in vibration measurement and error in finite element modelling. This project will study the effects of measurement noises and finite element model errors on bridge condition assessment, and develop improved techniques for predicting load carrying capacities of bridges. The technique developed will be applied to Main Roads WA bridges, will also be applicable to the assessment of other types of structures.Read moreRead less
Experimental and numerical study of dynamic properties of concrete and fibre reinforced concrete materials. Recent disastrous examples of life and economy loss due to terrorist action or accident explosion include Bali bombing and Western Australia gas explosion. Reliable prediction of structure response to blast and impact loads is essential for life and economy protection against such loads. This project will perform laboratory tests and numerical simulations to study the construction material ....Experimental and numerical study of dynamic properties of concrete and fibre reinforced concrete materials. Recent disastrous examples of life and economy loss due to terrorist action or accident explosion include Bali bombing and Western Australia gas explosion. Reliable prediction of structure response to blast and impact loads is essential for life and economy protection against such loads. This project will perform laboratory tests and numerical simulations to study the construction material properties under dynamic loading conditions, and develop numerical models for accurate predictions of structure response to blast loads. The project contributes to the integrated effort for a secure Australia. It will result in enormous savings from conducting blast tests and will have applications in civil, mining and defence engineering.Read moreRead less