Long-term corrosion of offshore steel structures in near-stagnant seawater. This project investigates the seawater corrosion of structural steels under near-stagnant and possibly polluted conditions. Better understanding of long-term corrosion of structural steels in near-stagnant seawaters is needed to predict the safety of steel offshore structures such as the pods supporting wind and wave energy generators. Also, the expensive maintenance of protective coatings and systems could be obviated o ....Long-term corrosion of offshore steel structures in near-stagnant seawater. This project investigates the seawater corrosion of structural steels under near-stagnant and possibly polluted conditions. Better understanding of long-term corrosion of structural steels in near-stagnant seawaters is needed to predict the safety of steel offshore structures such as the pods supporting wind and wave energy generators. Also, the expensive maintenance of protective coatings and systems could be obviated or reduced if corrosion remains acceptable. This project plans to investigate experimentally the temporal development and stochastic nature of general corrosion and pitting for steels under actual near-stagnant seawater conditions. It also plans to build mathematical-probabilistic models for corrosion prediction, calibrated to field data. These models will include allowance for microbiological corrosion effects, important under anthropological pollution.Read moreRead less
Short- and long-term corrosion of steels in highly calcareous seawaters . This project aims to quantify the development of the long-term (25-100 year) protective effect of calcareous deposits on the marine corrosion of mild steels. This is significant because such steels used extensively in major and very expensive coastal and offshore infrastructure. The project outcomes will improve scientific understanding, including the role of microbiological activity. It will develop and calibrate corrosio ....Short- and long-term corrosion of steels in highly calcareous seawaters . This project aims to quantify the development of the long-term (25-100 year) protective effect of calcareous deposits on the marine corrosion of mild steels. This is significant because such steels used extensively in major and very expensive coastal and offshore infrastructure. The project outcomes will improve scientific understanding, including the role of microbiological activity. It will develop and calibrate corrosion prediction models using classical and recently available 100 year data from Europe, the Pacific, Australia and also new project-specific experimental data. These models are expected to be of benefit for Australian engineering consultants in maintain their internationally competitive edge in offshore engineering.Read moreRead less
Predictive modelling of the incremental sheet forming process. This project will benefit Australia with the gain of fundamental understanding of an advanced manufacturing process leading to a step change from an 'art of expertise' to a scientific understanding and improvement. The innovative design software kernel developed will facilitate a step change in manufacture of complex sheet formed product, such as aircraft and vehicle panelling. This seed collaborative research with QMI Solutions and ....Predictive modelling of the incremental sheet forming process. This project will benefit Australia with the gain of fundamental understanding of an advanced manufacturing process leading to a step change from an 'art of expertise' to a scientific understanding and improvement. The innovative design software kernel developed will facilitate a step change in manufacture of complex sheet formed product, such as aircraft and vehicle panelling. This seed collaborative research with QMI Solutions and global partner, Boeing, will enhance national modelling capability in advanced metal forming, a niche market for Australian manufacturing. The new technology and research support capabilities for its adoption, will lead to new national business and export opportunities.Read moreRead less
Composite Structures of High-Strength Steel and Concrete. This project plans to investigate the use in building frames of composite steel-concrete members that use high-strength steel (HSS) instead of mild steel (MS). HSS is finding increased use in construction, and HSS has a much greater strength-to-weight ratio than MS, leading to lighter composite structures, less material usage and smaller foundations. Overall, this reduces the cost and carbon footprint of steel-framed buildings. The invest ....Composite Structures of High-Strength Steel and Concrete. This project plans to investigate the use in building frames of composite steel-concrete members that use high-strength steel (HSS) instead of mild steel (MS). HSS is finding increased use in construction, and HSS has a much greater strength-to-weight ratio than MS, leading to lighter composite structures, less material usage and smaller foundations. Overall, this reduces the cost and carbon footprint of steel-framed buildings. The investigation is planned to involve physical testing, numerical studies, developing structural models and crafting design guidance for T-beams, columns and joints. The major intended outcome of the project is design guidance that will support the expanded use of HSS.Read moreRead less
Design of tuneable microstructures for additive manufacturing. The project intends to develop methods to tune the microstructure of materials in additive manufacturing so that components can be manufactured with maximum productivity and properties. Additive manufacturing is leading the mass customisation of manufacturing. Designed tunable microstructures enable structure and properties to be tailored for specific applications. One of the greatest challenges, however, is how to control the scale ....Design of tuneable microstructures for additive manufacturing. The project intends to develop methods to tune the microstructure of materials in additive manufacturing so that components can be manufactured with maximum productivity and properties. Additive manufacturing is leading the mass customisation of manufacturing. Designed tunable microstructures enable structure and properties to be tailored for specific applications. One of the greatest challenges, however, is how to control the scale and morphology of the microstructure. This project aims to use the interdependence model of grain refinement to control and design grain sizes. The project first plans to investigate the near-rapid solidification conditions in aluminium alloys. It then plans to re-design the harder-to-manufacture titanium alloys to improve grain size control.Read moreRead less
Liquid Metal for quench detection sensors and low resistance joints. This project aims to develop next-generation liquid metal-based superconducting joints and quench detection sensors to enable superconducting magnets to operate in “persistent mode”. This would make a significant contribution to improving the safety and performance of superconducting coil systems at a reduced cost. Furthermore, intelligent features will be formulated to prevent hazardous and inefficient operating conditions. Th ....Liquid Metal for quench detection sensors and low resistance joints. This project aims to develop next-generation liquid metal-based superconducting joints and quench detection sensors to enable superconducting magnets to operate in “persistent mode”. This would make a significant contribution to improving the safety and performance of superconducting coil systems at a reduced cost. Furthermore, intelligent features will be formulated to prevent hazardous and inefficient operating conditions. The expected outcome is that an advanced superconducting coil system with improved stability and safety is delivered with newly developed liquid metal-based materials and relevant fabrication techniques.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC180100005
Funder
Australian Research Council
Funding Amount
$4,889,410.00
Summary
ARC Training Centre in Surface Engineering for Advanced Materials. The ARC Training Centre in Surface Engineering for Advanced Materials aims to provide pathways for job creation and a high quality workforce in manufacturing. Surface engineering for advanced materials is a core need in all manufacturing sectors and controls the efficiency, productivity and sustainability of Australian industry. This Centre will integrate industry-university cooperation for applied training within an industrial s ....ARC Training Centre in Surface Engineering for Advanced Materials. The ARC Training Centre in Surface Engineering for Advanced Materials aims to provide pathways for job creation and a high quality workforce in manufacturing. Surface engineering for advanced materials is a core need in all manufacturing sectors and controls the efficiency, productivity and sustainability of Australian industry. This Centre will integrate industry-university cooperation for applied training within an industrial setting and will cover a spectrum of applications ranging from thin films to thick coatings and additive layered materials. The Centre will pursue outcomes that are reflected in terms of industry-fit researchers and deliver commercial benefits for industry.Read moreRead less
Bulk Mg based hydrogen storage alloys with faster activation. Bulk Mg based hydrogen storage alloys with faster activation. This project aims to improve the performance and efficiency of manufacture of magnesium-based hydrogen storage alloys, making them more cost competitive and widely useable. A hydrogen economy will reduce greenhouse gas emissions and improve air quality in urban areas. The expected outcomes are an understanding of the mechanisms governing the activation process, a necessary ....Bulk Mg based hydrogen storage alloys with faster activation. Bulk Mg based hydrogen storage alloys with faster activation. This project aims to improve the performance and efficiency of manufacture of magnesium-based hydrogen storage alloys, making them more cost competitive and widely useable. A hydrogen economy will reduce greenhouse gas emissions and improve air quality in urban areas. The expected outcomes are an understanding of the mechanisms governing the activation process, a necessary step in manufacture, and techniques to exploit these mechanisms to minimise the activation time. This is expected to develop competitive, bulk magnesium-based hydrogen storage alloys for effective and safe hydrogen storage systems.Read moreRead less
Australian Laureate Fellowships - Grant ID: FL180100053
Funder
Australian Research Council
Funding Amount
$3,162,000.00
Summary
Re-discovering liquid metals from core to surface. This project aims to investigate and make new discoveries on the unique properties of liquid metals. Liquid metals have traditionally been used in mining, for switches, barometers, heat transfer units, and coolers and heaters. However, recent discoveries have indicated that liquid metals have untapped potential in applications for creating systems with extraordinary physical and chemical properties. This project will expand our knowledge of liqu ....Re-discovering liquid metals from core to surface. This project aims to investigate and make new discoveries on the unique properties of liquid metals. Liquid metals have traditionally been used in mining, for switches, barometers, heat transfer units, and coolers and heaters. However, recent discoveries have indicated that liquid metals have untapped potential in applications for creating systems with extraordinary physical and chemical properties. This project will expand our knowledge of liquid metals by exploring liquid metals as electron rich solvents and investigating new properties to develop future applications in electronics, optics, catalysts, thermal devices and bio systems.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100069
Funder
Australian Research Council
Funding Amount
$200,000.00
Summary
A complete thermo-electric characterisation facility for exploration of novel materials and devices at high temperatures. This high temperature materials’ characterisation facility will be the most advanced measurement setup of its kind in Australia. The unique features of the equipment and its high versatility will substantially enhance national research capabilities in functional materials, metal engineering, manufacturing engineering, chemistry, and physics.