A landfill cover that generates electricity: a Microbial Fuel Cell application. Landfills account for over two per cent of Australia’s greenhouse emissions, dominating emissions from waste and wastewater. Methane emissions are inherent to landfills because waste cannot be permanently sealed until a landfill cell is full. In this project, a microbial fuel cell (MFC) landfill cover will be developed as a means of achieving full biogas capture, from the time that waste is placed. The MFC cover syst ....A landfill cover that generates electricity: a Microbial Fuel Cell application. Landfills account for over two per cent of Australia’s greenhouse emissions, dominating emissions from waste and wastewater. Methane emissions are inherent to landfills because waste cannot be permanently sealed until a landfill cell is full. In this project, a microbial fuel cell (MFC) landfill cover will be developed as a means of achieving full biogas capture, from the time that waste is placed. The MFC cover system would consist of a relatively thin and deformable granular graphite layer colonised by current generating methane oxidising microorganisms, overlain by a proton exchange membrane and steel mesh as the anode layer. The MFC cover will provide the benefit of power generation as well as more complete greenhouse gas mitigation. Read moreRead less
Averting Disaster: New Ways to Assess Bushfire Risk and Building Integrity. This project aims to develop a new method of assessing bushfire risk and building integrity using drone-based advanced technologies and computational fluid dynamics based heat transfer modelling for buildings located in bushfire prone areas. This coupled approach will enable the evaluation of bushfire effects on buildings and provide pre-bushfire condition/risk assessments, and site-specific cost-effective remedial actio ....Averting Disaster: New Ways to Assess Bushfire Risk and Building Integrity. This project aims to develop a new method of assessing bushfire risk and building integrity using drone-based advanced technologies and computational fluid dynamics based heat transfer modelling for buildings located in bushfire prone areas. This coupled approach will enable the evaluation of bushfire effects on buildings and provide pre-bushfire condition/risk assessments, and site-specific cost-effective remedial actions to reduce or eliminate bushfire damage and mitigate the risks pre-bushfire season. The new method will be applied to three selected buildings through which further enhancements and validations can be achieved. This project will showcase how the selected buildings and their components can be made bushfire safe.Read moreRead less
Enhancing the fire and energy ratings of cold-formed steel wall systems. This project intends to develop novel cold-formed light-gauge steel frame (LSF) wall systems with superior fire resistance and energy ratings for use in buildings. LSF systems are increasingly used in homes and offices. The project plans to investigate fundamental thermal, structural and energy performances of LSF walls and their components using experimental and numerical studies. It plans to develop enhanced plasterboards ....Enhancing the fire and energy ratings of cold-formed steel wall systems. This project intends to develop novel cold-formed light-gauge steel frame (LSF) wall systems with superior fire resistance and energy ratings for use in buildings. LSF systems are increasingly used in homes and offices. The project plans to investigate fundamental thermal, structural and energy performances of LSF walls and their components using experimental and numerical studies. It plans to develop enhanced plasterboards, insulations and innovative composite panels using suitable nanomaterials, chemical additives, fillers and phase-change materials and use these with innovative wall configurations to significantly improve the fire and energy performance of LSF walls. The new wall systems may increase occupant comfort and safety, reduce business losses in fires, and lead to low-energy buildings.Read moreRead less
Mitigating Vehicular Crashes into Masonry Buildings . Around 2000 vehicles crash annually into school, home and shop buildings located at close proximity to heavily trafficked roads in Australia and cause significant distress to occupants of building and vehicle. The impacted walls mostly of masonry, suffer severe damage often with vehicle intrusion into the building. Despite this, the intrusion mechanism is not understood and no effective mitigation strategies exist at present. This project wi ....Mitigating Vehicular Crashes into Masonry Buildings . Around 2000 vehicles crash annually into school, home and shop buildings located at close proximity to heavily trafficked roads in Australia and cause significant distress to occupants of building and vehicle. The impacted walls mostly of masonry, suffer severe damage often with vehicle intrusion into the building. Despite this, the intrusion mechanism is not understood and no effective mitigation strategies exist at present. This project will uncover the mechanics of vehicle intrusions through masonry walls and develop novel mitigation strategies using high energy absorbing auxetic composite render and innovative vibration isolation at wall edges. These innovations will lead to new theories that can save lives in the building and vehicle.Read moreRead less
Understanding Fugitive Greenhouse Gas Emissions from Wastewater Systems for Reliable Accounting and Effective Mitigation. Climate change caused by greenhouse gas (GHG) emissions is one of the most serious challenges facing mankind. Substantial reductions in emissions must be achieved, with responsibility shared by all industrial sectors. Wastewater systems contribute to GHG emission through not only energy consumption but also direct emissions of fugitive GHG such as methane and nitrous oxide. T ....Understanding Fugitive Greenhouse Gas Emissions from Wastewater Systems for Reliable Accounting and Effective Mitigation. Climate change caused by greenhouse gas (GHG) emissions is one of the most serious challenges facing mankind. Substantial reductions in emissions must be achieved, with responsibility shared by all industrial sectors. Wastewater systems contribute to GHG emission through not only energy consumption but also direct emissions of fugitive GHG such as methane and nitrous oxide. This project aims to deliver the urgently needed knowledge and technology support to the Australian wastewater industry to achieve reductions in fugitive emissions. The research will also provide support to the greenhouse office via more reliable estimation of such emissions.Read moreRead less
Safety and robustness of tall timber buildings under extreme dynamic events. This project aims to develop innovative and robust structural connections in tall mass timber buildings by characterising their mechanical behaviour under dynamic loads induced by extreme events like earthquakes or progressive collapse. This project expects to generate new knowledge in the safe, economic, and efficient design of mass timber buildings. Expected outcomes of this project include enhanced robustness design ....Safety and robustness of tall timber buildings under extreme dynamic events. This project aims to develop innovative and robust structural connections in tall mass timber buildings by characterising their mechanical behaviour under dynamic loads induced by extreme events like earthquakes or progressive collapse. This project expects to generate new knowledge in the safe, economic, and efficient design of mass timber buildings. Expected outcomes of this project include enhanced robustness design guidelines for the engineering community. This should lead to significant benefits, such as contributing to uptake of viable low-cost timber housing solutions in response to population growth and contributing to net zero emissions in Australia by 2050, and transition to safer and resilient infrastructure in urban development.Read moreRead less
Next generation core-shell materials based on biomolecular dual-templating. This project aims to discover and develop new methods and knowledge for the precision engineering of next-generation core-shell materials using sustainable biomolecular dual-templating processes. This research builds on a recent breakthrough - emulsion and biomimetic dual-templating technology for facile preparation of silica capsules, and is expected to revolutionise current approaches for making core-shell materials. S ....Next generation core-shell materials based on biomolecular dual-templating. This project aims to discover and develop new methods and knowledge for the precision engineering of next-generation core-shell materials using sustainable biomolecular dual-templating processes. This research builds on a recent breakthrough - emulsion and biomimetic dual-templating technology for facile preparation of silica capsules, and is expected to revolutionise current approaches for making core-shell materials. Significant outcomes are expected to be achieved through building fundamental understanding around this breakthrough, including new concepts for hierarchical nanomaterials based on biomolecular design, new molecular and engineering design rules for core-shell materials, and novel materials for applications in sustained release and delivery systems.Read moreRead less
An Integrated Biotechnological Process for Production of Lactic Acid from Carbohydrate-Waste Streams by Rhizopus sp. Lactic acid is the most widely occurring multifunctional organic acid. It has enormous applications in food and food-related industries, and great potential use for production of biodegradable and biocompatible polylactate polymers. The aim of this research is to develop an innovative biotechnological process, incorporating simultaneous saccharification and fermentation, which int ....An Integrated Biotechnological Process for Production of Lactic Acid from Carbohydrate-Waste Streams by Rhizopus sp. Lactic acid is the most widely occurring multifunctional organic acid. It has enormous applications in food and food-related industries, and great potential use for production of biodegradable and biocompatible polylactate polymers. The aim of this research is to develop an innovative biotechnological process, incorporating simultaneous saccharification and fermentation, which integrates the production of lactic acid with the treatment of high strength food industry ?effluent? streams - carbohydrate waste streams. The proposed SSF process will cultivate an identified fungal Rhizopus sp strain on the waste streams, as production substrates, leading to an environmentally friendly and economically sustainable new technology for the food industry.Read moreRead less
Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will re ....Engineering floating liquid marbles for three-dimensional cell cultures. This project aims to understand the physics of three-dimensional cell cultures in a liquid marble floating on a liquid free surface. New methodology developed can produce these cell cultures without using matrices or scaffolds and with run-times well beyond existing technologies. This methodology closely mimics a normal in-vivo environment and produces spheroids needed in cell transplantation therapies. This project will resolve uncertainties in the underlying phenomena. The expected outcome should support future high quality cell cultures suitable for transplantation therapies.Read moreRead less
Multifunctional Structural Panels for Next-generation Infrastructure. This project aims to develop a multifunctional prefabricated structural panel for current and future infrastructure applications for both land and offshore environments. Prefabrication enables enhanced product control as well as the ability to rapidly construct whole structures or their components. The panels utilise an inner lightweight foam and fibre-reinforced polymer (FRP) composite core with strong outer panels made from ....Multifunctional Structural Panels for Next-generation Infrastructure. This project aims to develop a multifunctional prefabricated structural panel for current and future infrastructure applications for both land and offshore environments. Prefabrication enables enhanced product control as well as the ability to rapidly construct whole structures or their components. The panels utilise an inner lightweight foam and fibre-reinforced polymer (FRP) composite core with strong outer panels made from FRP sheets and high-strength concrete. The expected outcomes include experimental and numerical validation of the system, that will give designers and asset owners the confidence to adopt this new panel. The panel system presents an upward step change in construction technology and built infrastructure performance.Read moreRead less