Interface Engineering of Multilayer Nanostructures. Nanostructured multilayers can outperform coatings of their constituent layers in both hardness and strength. It is believed that the nature of interfaces in these materials is critical since they mediate dislocation motion and crack propagation. This project will use advanced synthesis, microanalysis and theoretical methods to investigate multilayer coatings with sharp, diffuse and rough interfaces in order to reveal their failure mechanisms u ....Interface Engineering of Multilayer Nanostructures. Nanostructured multilayers can outperform coatings of their constituent layers in both hardness and strength. It is believed that the nature of interfaces in these materials is critical since they mediate dislocation motion and crack propagation. This project will use advanced synthesis, microanalysis and theoretical methods to investigate multilayer coatings with sharp, diffuse and rough interfaces in order to reveal their failure mechanisms under stress. This will enable us to understand the principles required to design the strongest structures and facilitate the selection of materials and deposition parameters in order to produce coatings optimised for a range of demanding applications.Read moreRead less
Flowable composite system with short S-glass fibre and halloysite nanotubes. Flowable composite system with short S-glass fibre and halloysite nanotubes. This project aims to design dental materials with reduced amalgams, using a strong but flowable composite with randomly distributed short S-glass fibres and a non-toxic natural nano-composite overlay. This alternative dental composite material is expected to meet international regulatory bodies’ intention to reduce amalgams. Using advanced phot ....Flowable composite system with short S-glass fibre and halloysite nanotubes. Flowable composite system with short S-glass fibre and halloysite nanotubes. This project aims to design dental materials with reduced amalgams, using a strong but flowable composite with randomly distributed short S-glass fibres and a non-toxic natural nano-composite overlay. This alternative dental composite material is expected to meet international regulatory bodies’ intention to reduce amalgams. Using advanced photonic and micro-mechanical techniques to make engineered material is also expected to enhance Australian manufacturing.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC160100032
Funder
Australian Research Council
Funding Amount
$3,024,379.00
Summary
ARC Training Centre in Lightweight Automotive Structures. ARC Training Centre in Lightweight Automotive Structures. This training centre aims to train a cohort of industry-focused researchers and to develop new lightweighting technologies, which are key to reducing carbon dioxide (CO2 emissions in transportation. In partnership with domestic and international companies and universities, this centre intends to develop new lightweight materials, advanced manufacturing processes, energy storage des ....ARC Training Centre in Lightweight Automotive Structures. ARC Training Centre in Lightweight Automotive Structures. This training centre aims to train a cohort of industry-focused researchers and to develop new lightweighting technologies, which are key to reducing carbon dioxide (CO2 emissions in transportation. In partnership with domestic and international companies and universities, this centre intends to develop new lightweight materials, advanced manufacturing processes, energy storage designs, and rapid non-destructive evaluation techniques. The intended outcome is to accelerate the transformation of Australia's automotive industry—now facing unprecedented structural adjustment—from vehicle production to export of design and engineering services, high-value products, and novel technology solutions.Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC160100036
Funder
Australian Research Council
Funding Amount
$4,881,754.00
Summary
ARC Training Centre in Alloy Innovation for Mining Efficiency. ARC Training Centre in Alloy Innovation for Mining Efficiency. This centre aims to make Australian manufacturers dominant in the multi-billion dollar mining equipment sector by training innovators to design the world’s best highly customized long-life, wear resistant components. It intends to rapidly develop customized alloys that excel in severe mining conditions, using three-dimensional printing, novel characterisation and its netw ....ARC Training Centre in Alloy Innovation for Mining Efficiency. ARC Training Centre in Alloy Innovation for Mining Efficiency. This centre aims to make Australian manufacturers dominant in the multi-billion dollar mining equipment sector by training innovators to design the world’s best highly customized long-life, wear resistant components. It intends to rapidly develop customized alloys that excel in severe mining conditions, using three-dimensional printing, novel characterisation and its networked training environment. It expects these innovations will enable much needed efficiencies after the end of the mining super-cycle. Anticipated outcomes are the design of products with superior alloy design and material selection; jobs growth and security in the mining component production sector; and increased mining efficiency and cost reduction.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453732
Funder
Australian Research Council
Funding Amount
$726,164.00
Summary
Interactive network for plasma and surface analysis. Plasma-based materials synthesis and surface modification methods have great value because they allow a wide range of ion energies and processing conditions to be achieved. Accurate in-situ measurement of the plasma conditions is crucial to the development of reliable new processes. This proposal will establish unique capabilities for carrying out diagnostic studies of plasma surface treatment technologies. The proposal will link Australia's m ....Interactive network for plasma and surface analysis. Plasma-based materials synthesis and surface modification methods have great value because they allow a wide range of ion energies and processing conditions to be achieved. Accurate in-situ measurement of the plasma conditions is crucial to the development of reliable new processes. This proposal will establish unique capabilities for carrying out diagnostic studies of plasma surface treatment technologies. The proposal will link Australia's most advanced plasma processing and diagnostic equipment located at the University of Sydney and the ANU to advanced materials and surface analysis facilities at La Trobe and RMIT Universities in Melbourne, using interactive e-science links and vacuum sample-transfer facilities.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453803
Funder
Australian Research Council
Funding Amount
$535,452.00
Summary
High Performance Optical and Electronic Coatings Facility. The main aim of this project is to establish a state-of-the-art optical and electronic coatings facility for the Australian optoelectronics and nanotechnology research community to develop novel technologies of interest to communications, information technology and nanotechnology industries. The facility will allow the fabrication of a range of active and passive devices including photonic integrated circuits. The facility is f ....High Performance Optical and Electronic Coatings Facility. The main aim of this project is to establish a state-of-the-art optical and electronic coatings facility for the Australian optoelectronics and nanotechnology research community to develop novel technologies of interest to communications, information technology and nanotechnology industries. The facility will allow the fabrication of a range of active and passive devices including photonic integrated circuits. The facility is flexible enough to allow the deposition of a range of dielectric and metal layers with different structural, optical and electrical characteristics of fundamental as well as applied interest. This facility may open up new opportunities to develop microcavities, nanocrystals, tunable lasers and detectors, novel cantilevers for atomic force microscopy.
Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0560959
Funder
Australian Research Council
Funding Amount
$165,000.00
Summary
The Macquarie National Low Temperature Optoelectronic Thin Film Growth Facility. Funding is requested for an Australian facility for the growth of nitride and oxide thin films with in-situ optical analysis equipment for the monitoring of growth parameters. It is envisaged that this facility would be for the development of materials and device structures for photonic, electronic and optoelectronic applications. The facility will also provide a leading Australian source of these materials for fund ....The Macquarie National Low Temperature Optoelectronic Thin Film Growth Facility. Funding is requested for an Australian facility for the growth of nitride and oxide thin films with in-situ optical analysis equipment for the monitoring of growth parameters. It is envisaged that this facility would be for the development of materials and device structures for photonic, electronic and optoelectronic applications. The facility will also provide a leading Australian source of these materials for fundamental material studies utilising nuclear analysis and implantation technologies, high resolution X-ray diffraction, high spatial resolution micro-cathodoluminescence and other forms of analysis. Ex-situ optical analysis equipment is also requested for post-growth evaluation to compliment and evaluate the in-situ analysis.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100156
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Advanced Laser Additive Manufacturing System for Extended Applications to Surface Engineering, Direct Manufacturing and New Alloy Development. Advanced laser additive manufacturing system for extended applications to surface engineering, direct manufacturing and new alloy development: This project will provide an advanced laser additive manufacturing system for extended applications. Although the facility was originally designed for forefront additive manufacturing, it enables innovative resear ....Advanced Laser Additive Manufacturing System for Extended Applications to Surface Engineering, Direct Manufacturing and New Alloy Development. Advanced laser additive manufacturing system for extended applications to surface engineering, direct manufacturing and new alloy development: This project will provide an advanced laser additive manufacturing system for extended applications. Although the facility was originally designed for forefront additive manufacturing, it enables innovative research on surface engineering to solve the long standing corrosion and wear problems associated with metal components and to produce biomedical coatings on titanium implants. The facility can also be used to develop high quality alloys, including titanium and magnesium alloys, through an accelerated metallurgy approach, leading to breakthrough progress in metal research. Such alloys are highly desired by automotive and aerospace industries to improve fuel efficiency through weight reduction. Read moreRead less
ARC Research Network for Advanced Materials. Materials science/engineering is decidedly interdisciplinary, covering all science and impacting on all manufacturing industry. This network will promote interactions that do not usually occur between materials researchers and students across Australia and internationally from diverse disciplines. The scope is broadly based on advanced materials production, processing and properties but focused in four areas, involving: i) innovative structural/functi ....ARC Research Network for Advanced Materials. Materials science/engineering is decidedly interdisciplinary, covering all science and impacting on all manufacturing industry. This network will promote interactions that do not usually occur between materials researchers and students across Australia and internationally from diverse disciplines. The scope is broadly based on advanced materials production, processing and properties but focused in four areas, involving: i) innovative structural/functional materials, ii) high-tech IT/communications/sensing materials, iii) materials solutions for manufacturing, iv) materials for a sustainable Australia, and v) emerging materials technologies. Key programs will promote interdisciplinary workshops and early career researcher interactions.Read moreRead less