Understanding of structure development in drying droplets through the stickiness paradigm. The aims of this research are to develop a new model for multicomponent droplet drying. This model will provide predictions of conditions where composition variation exists in the drying particles. Validation of the model will be made using a novel instrument to measure the in-situ development of surface stickiness during drying. Stickiness is an important issue encountered during drying and handling of so ....Understanding of structure development in drying droplets through the stickiness paradigm. The aims of this research are to develop a new model for multicomponent droplet drying. This model will provide predictions of conditions where composition variation exists in the drying particles. Validation of the model will be made using a novel instrument to measure the in-situ development of surface stickiness during drying. Stickiness is an important issue encountered during drying and handling of some key food and consumer materials. Currently, there is no technique to measure the evolution of stickiness during drying. Key outputs will include the model, the instrument, and the development of efficient methods to generate the multicomponent data.Read moreRead less
Self-assembly of gelling biopolymer particles. Biopolymers provide a renewable source of structuring agents for a variety of potential uses in food, pharmaceutical and other applications that require bio-compatibility. Swollen biopolymer particles of sub-millimetre size are particularly useful as they combine macroscopic structure formation with an ability to flow and a desirable soft solid texture. Two limitations to the current utilisation of biopolymer particles are that they either cannot be ....Self-assembly of gelling biopolymer particles. Biopolymers provide a renewable source of structuring agents for a variety of potential uses in food, pharmaceutical and other applications that require bio-compatibility. Swollen biopolymer particles of sub-millimetre size are particularly useful as they combine macroscopic structure formation with an ability to flow and a desirable soft solid texture. Two limitations to the current utilisation of biopolymer particles are that they either cannot be predictably produced direct from a dried form, or if they are (e.g. cooked starch granules), there is a lack of scientific understanding that limits use of natural sources without subsequent chemical modification. This project will provide the science & technology to overcome these limitations.Read moreRead less
Microfluidic Studies of Stimuli-Responsive Emulsions. Breakthrough 'stimuli-responsive interface technology' has been developed in Australia to allow better control over emulsions, which are oil-in-water mixtures used widely in everyday products such as medicines. This project will increase our understanding of this new technology, by examining how the chemistry of the molecules at the interface interacts with fluid behaviour when the emulsion is made. The research will employ miniature lab-on-a ....Microfluidic Studies of Stimuli-Responsive Emulsions. Breakthrough 'stimuli-responsive interface technology' has been developed in Australia to allow better control over emulsions, which are oil-in-water mixtures used widely in everyday products such as medicines. This project will increase our understanding of this new technology, by examining how the chemistry of the molecules at the interface interacts with fluid behaviour when the emulsion is made. The research will employ miniature lab-on-a-chip systems, to give engineers and scientists design rules for this new technology, opening the way to new products that will improve our everyday lives. One immediate product to be researched is 'precision' double emulsions, which show unique properties for the delivery of chemotherapy medicines.Read moreRead less
Engineering Nanostructured Bio-inspired Products. New nanostructured products that draw on biology promise to revolutionise our lives and economy. Designer emulsions and self-assembling particles inspired by viruses are two such products that form the focus for this research programme. The constitutive behaviour of bio-molecular films that control emulsion performance will be characterised and linked to molecular properties and manufacturing conditions. A broad-based technology platform for t ....Engineering Nanostructured Bio-inspired Products. New nanostructured products that draw on biology promise to revolutionise our lives and economy. Designer emulsions and self-assembling particles inspired by viruses are two such products that form the focus for this research programme. The constitutive behaviour of bio-molecular films that control emulsion performance will be characterised and linked to molecular properties and manufacturing conditions. A broad-based technology platform for the in vitro creation of self-assembling biological nanoparticles will also be developed. Key outcomes will be valuable IPR and fundamental engineering science knowledge to ensure that the value chain for this class of products can deliver commercial outcomes.Read moreRead less
Plate Wave Tomography for Reconstruction of Laminar Defects. The proposed project promotes a conceptual advance in the application of plate waves for the quantitative reconstruction of laminar defects by investigating fundamental experimental and analytical aspects of a novel approach in plate wave ultrasonic tomography. A successful development will have a comparable significance in the area of health monitoring of thin structures as computer tomography had in medical imaging. Previous attempts ....Plate Wave Tomography for Reconstruction of Laminar Defects. The proposed project promotes a conceptual advance in the application of plate waves for the quantitative reconstruction of laminar defects by investigating fundamental experimental and analytical aspects of a novel approach in plate wave ultrasonic tomography. A successful development will have a comparable significance in the area of health monitoring of thin structures as computer tomography had in medical imaging. Previous attempts have ignored wave scattering effects, and therefore do not describe the correct physics of the problem. With its combined experimental-numerical approach, the proposed fundamental studies will help to identify the potential of plate wave ultrasonic tomography for in-situ health monitoring of realistic structures and smart materials design.Read moreRead less
Tomographic Imaging of Structural Damage in Plates. The potential benefit of structural health monitoring is highlighted by the socio-economic impact of structural failure, which may result in loss of lives, infrastructure disruptions and loss of productivity. This proposal promotes a fundamental advance in the novel concept of ultrasonic diffraction tomography for imaging early stage structural damage in plates. The successful development will represent an essential advance in quantitative non- ....Tomographic Imaging of Structural Damage in Plates. The potential benefit of structural health monitoring is highlighted by the socio-economic impact of structural failure, which may result in loss of lives, infrastructure disruptions and loss of productivity. This proposal promotes a fundamental advance in the novel concept of ultrasonic diffraction tomography for imaging early stage structural damage in plates. The successful development will represent an essential advance in quantitative non-destructive evaluation of thin structures and enable the transition of the technique to realistic structures with all the potential benefits in mechanical and civil infrastructure management resulting in improved safety, reduced maintenance costs and the use of more efficient structural designs.Read moreRead less
Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this info ....Wet granule mechanics and their influence on agglomeration behaviour and granulation processes. Granulation is a widely-used particle size enlargement process performed by spraying a liquid binder onto an agitated powder mass. It is currently impossible to quantitatively predict granule growth behaviour in terms of the fundamental properties of the particles and binder. This project will measure and model the deformation of granules and the strength of bonds formed between them and use this information to predict their growth behaviour. Special attention will be given to the effects of strain-rate and particle morphology in granulation mechanics. Improvements in granulation technology will be of great benefit to food, pharmaceutical, agricultural, explosives and mining industries and opens the way to 'designer granulation' for special purposes.Read moreRead less
Optimising Fouling Control in Membrane Bioreactors. Membrane bioreactors (MBR) are growing in importance for wastewater treatment because they offer an alternative for producing higher effluent quality wastewater within a more compact space compared to conventional processes. However, due to the pumping and bubbling used to keep the membranes clear of foulants resulting from the biological processes in MBR's, controlling fouling incurs significant energy usage and costs. The proposal aims to red ....Optimising Fouling Control in Membrane Bioreactors. Membrane bioreactors (MBR) are growing in importance for wastewater treatment because they offer an alternative for producing higher effluent quality wastewater within a more compact space compared to conventional processes. However, due to the pumping and bubbling used to keep the membranes clear of foulants resulting from the biological processes in MBR's, controlling fouling incurs significant energy usage and costs. The proposal aims to reduce the costs of fouling control by understanding the optimal conditions to remove these depositions and improve the design of MBR modules, operating conditions and shear delivery in the membrane system.Read moreRead less
Macromolecular Fouling in Membrane Bioreactors. As the demands for domestic and industrial water increasing in Australia and overseas, membrane bioreactors (MBR) offer an alternative for producing higher effluent quality wastewater compared to conventional processes. However, aeration costs used to remove fouling deposits (which reduce the operating performance) need to be further minimised. The proposal aims to study fundamental mechanisms involve in the deposition of foulant components by usin ....Macromolecular Fouling in Membrane Bioreactors. As the demands for domestic and industrial water increasing in Australia and overseas, membrane bioreactors (MBR) offer an alternative for producing higher effluent quality wastewater compared to conventional processes. However, aeration costs used to remove fouling deposits (which reduce the operating performance) need to be further minimised. The proposal aims to study fundamental mechanisms involve in the deposition of foulant components by using model systems of polysaccharides, proteins and microbial cells and comparing these with real MBR systems. The effect of bubbling varied gas compositions (air/H2S ratios) a novel approach in this study will be investigated to prevent or remove foulants in MBR systems. Read moreRead less
Hollow-core microstructured polymer fibres for optical sensing applications. A range of remarkable new optical fibres will be fabricated utilising the capabilities of a unique polymer fibre fabrication facility and focussing on the highly demanding class of microstructured fibres in which guidance in a hollow core is achieved through photonic band gap or Bragg guidance. Long lengths of low-loss fibres of this type will be developed, and applications in optical gas sensing, spectroscopy, voltage ....Hollow-core microstructured polymer fibres for optical sensing applications. A range of remarkable new optical fibres will be fabricated utilising the capabilities of a unique polymer fibre fabrication facility and focussing on the highly demanding class of microstructured fibres in which guidance in a hollow core is achieved through photonic band gap or Bragg guidance. Long lengths of low-loss fibres of this type will be developed, and applications in optical gas sensing, spectroscopy, voltage sensing and telecommunications will be explored.Read moreRead less