Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by th ....Wearable thermoelectric textiles for portable microelectronics. Wearable thermoelectrics enable the power generation from the temperature difference between human body and ambient temperature by using thermoelectric effect. This project aims to design eco-friendly wearable thermoelectric textiles to realize high-efficiency solid-state power generation and meet individual needs with human comfort and health. The target is to achieve a power density in the as-designed thermoelectric textiles by the optimization of materials and device design. The outcome will open up a new platform for the green and sustainable charge for portable microelectronics, which will lead to an innovative technology for energy management, which will place Australia at the forefront of wearable electronics and textile industry.Read moreRead less
The Effect of Fines Particles on Production and Permeability of cbm Reservoirs. Coalbed methane (cbm) energy resources in Australia exceed $20b in value. One of the production issues with recovering cbm is fines that are created or exist in the coal, which block gas flow to the recovery wells and damage downstream equipment. Understanding how fines are created and migrate within gas wells and then overcoming this problem, the purpose of this research, could deliver additional gas production wort ....The Effect of Fines Particles on Production and Permeability of cbm Reservoirs. Coalbed methane (cbm) energy resources in Australia exceed $20b in value. One of the production issues with recovering cbm is fines that are created or exist in the coal, which block gas flow to the recovery wells and damage downstream equipment. Understanding how fines are created and migrate within gas wells and then overcoming this problem, the purpose of this research, could deliver additional gas production worth over $1.8billion and reduce maintenance costs related to cbm extraction by $25m per year.Read moreRead less
Selective wellbore coatings to control fines damage in coal seam gas wells. This project aims to develop a completely new approach to control solids production in coal seam gas wellbores using a selective phase-inversion polymer coating. The approach will take advantage of the low permeability of mudrocks to form a protective barrier across clay-rich layers while remaining permeable across the gas-producing coal seams. The production of fine solids is a key technical issue affecting the producti ....Selective wellbore coatings to control fines damage in coal seam gas wells. This project aims to develop a completely new approach to control solids production in coal seam gas wellbores using a selective phase-inversion polymer coating. The approach will take advantage of the low permeability of mudrocks to form a protective barrier across clay-rich layers while remaining permeable across the gas-producing coal seams. The production of fine solids is a key technical issue affecting the productivity of coal seam gas wells in Queensland, and leads to 10-15 days’ production downtime a year. The expected outcomes of the project include fundamental understanding of the solids breakage phenomena, a predictive tool to classify potential solids risks in coal seam gas wells, and a novel rock-selective wellbore coating technology to control solids production. The potential economic impacts from the project are lower gas production costs and improved gas supply security.Read moreRead less
Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-den ....Low-density high-performance proppants for hydraulic fracturing process . Australia has vast resources of unconventional oil/gas, which require hydraulic fracturing to stimulate production. This project aims to develop advanced low-density high-performance proppants from industry waste for hydraulic fracturing. This will be achieved by selecting purer SiO2 raw material, carefully designing the porous structure, and fully understanding its relationship with strength and pack conductivity. Low-density means no chemicals in proppant transportation and application. Successful development of such high-performance proppants will significantly increase Australia oil/gas exploration and production with an environmental acceptable technology, a leap forward for the oil/gas industry in Australia and the world.Read moreRead less
Enhanced productivity of coal seam gas wells by continuous gas circulation. This project aims to develop foam assisted continuous gas circulation for dewatering new and existing coal seam gas wells. The potential benefits of this new method include enhanced gas production, better well control, reduced costs and better environmental effectiveness. The proposed solution eliminates the need for mechanical pumps which are currently used for dewatering, and which fail regularly due to gas and solids ....Enhanced productivity of coal seam gas wells by continuous gas circulation. This project aims to develop foam assisted continuous gas circulation for dewatering new and existing coal seam gas wells. The potential benefits of this new method include enhanced gas production, better well control, reduced costs and better environmental effectiveness. The proposed solution eliminates the need for mechanical pumps which are currently used for dewatering, and which fail regularly due to gas and solids accumulation within the production wells. Continuous gas circulation could achieve significant savings in downtime and maintenance costs. In addition, reducing onsite maintenance will minimise access requirements for maintenance rigs which disrupt rural activities where the wells are located, thus easing local traffic and reduce the environmental impacts that are associated with well workovers.Read moreRead less
Dynamic Gas Permeability Investigations of Highly Stressed Coals. Coal Bed Methane (CBM) is an emerging energy resource in Australia, which has multi-billion dollar CBM reserves. Gas is clean burning, produces little greenhouse gas and almost no disruption to surface activities (like farming) during extraction. These environmental benefits, with low cost, make gas the fuel of choice for power and heat worldwide. This project seeks to assist development of CBM engineering from deep coal seams. Th ....Dynamic Gas Permeability Investigations of Highly Stressed Coals. Coal Bed Methane (CBM) is an emerging energy resource in Australia, which has multi-billion dollar CBM reserves. Gas is clean burning, produces little greenhouse gas and almost no disruption to surface activities (like farming) during extraction. These environmental benefits, with low cost, make gas the fuel of choice for power and heat worldwide. This project seeks to assist development of CBM engineering from deep coal seams. These contain the most gas, but are technically more difficult to develop than shallower reservoirs. In particular, it examines how natural and induced stress fields can be used to improve productivity, by understanding the relationships between different coal types, their environment and gas production rate.Read moreRead less
Electrochemical conversion of carbon dioxide to formic acid. This project aims to develop economical and scalable carbon dioxide electrochemical technologies to convert carbon dioxide in blast furnace flue gas to formic acid as a value-added product in steel-making plants. The project expects to develop new electrochemical catalysts, to optimise the structure of electrodes and ultimately improve carbon dioxide conversion efficiency and reaction selectivity towards formic acid. The expected outco ....Electrochemical conversion of carbon dioxide to formic acid. This project aims to develop economical and scalable carbon dioxide electrochemical technologies to convert carbon dioxide in blast furnace flue gas to formic acid as a value-added product in steel-making plants. The project expects to develop new electrochemical catalysts, to optimise the structure of electrodes and ultimately improve carbon dioxide conversion efficiency and reaction selectivity towards formic acid. The expected outcomes of this project will provide an efficient and economically viable electrochemical technology to convert carbon dioxide to a valuable product such as formic acid or syngas, with the potential to significantly reduce the emission of carbon dioxide from steel-making processes and coal-fired power plants.Read moreRead less
Wearable thermoelectrics for personal heat management. Thermoregulation has substantial implications for energy consumption and human comfort and health. This project aims to develop wearable thermoelectric materials and devices with high cooling performance for personal heat management. A novel assembly approach, coupled with device design and materials engineering strategies, will be developed to engineer flexible thermoelectric materials with unique structures and chemistry. The key breakthro ....Wearable thermoelectrics for personal heat management. Thermoregulation has substantial implications for energy consumption and human comfort and health. This project aims to develop wearable thermoelectric materials and devices with high cooling performance for personal heat management. A novel assembly approach, coupled with device design and materials engineering strategies, will be developed to engineer flexible thermoelectric materials with unique structures and chemistry. The key breakthrough is to design wearable thermoelectric devices with high flexibility and user comfort. The expected outcomes of this project will lead to an innovative cooling technology for personal heat management, which will place Australia at the forefront of wearable electronics and garment industry.Read moreRead less
New Stratigraphy and Geostatistics for Gas and Water Resources . Management of gas and water resources is of significant importance to the Australian economy and society. Industry and government use digital modelling to assist in resources management. The first step in modelling is to correlate geological data and then use geostatistics to estimate properties in areas without data. This project aims to produce a new geological framework for the Surat Basin underpinned by new zircon ages and ages ....New Stratigraphy and Geostatistics for Gas and Water Resources . Management of gas and water resources is of significant importance to the Australian economy and society. Industry and government use digital modelling to assist in resources management. The first step in modelling is to correlate geological data and then use geostatistics to estimate properties in areas without data. This project aims to produce a new geological framework for the Surat Basin underpinned by new zircon ages and ages of fossils in sediments and a new geostatistical methodology to better represent flow properties in coal seams and aquifers. This is expected result in a more accurate modelling methodology that can be used by industry and government for modelling resources, including in other basins in Australia and worldwide.Read moreRead less
In-situ Characterisation of Coal from Coal Seam Gas Developments. We aim to develop advanced methods for determination of coal properties required for optimising gas recovery, scheduling future developments and water management by Queensland Gas Company. We will characterise multiphase flow of gas and water in coal cores by Positron Emission Tomography and flooding experiments. Advancement in knowledge is achieved by using massive data from 4D-imaging to predict evolution of petrophysical proper ....In-situ Characterisation of Coal from Coal Seam Gas Developments. We aim to develop advanced methods for determination of coal properties required for optimising gas recovery, scheduling future developments and water management by Queensland Gas Company. We will characterise multiphase flow of gas and water in coal cores by Positron Emission Tomography and flooding experiments. Advancement in knowledge is achieved by using massive data from 4D-imaging to predict evolution of petrophysical properties at in situ condition in different types of coal. This will future proof Australia as the world’s largest exporter of natural gas and will provide significant benefit for the industry in satisfying domestic gas security, maintaining international commitment and addressing environmental concerns. Read moreRead less