Next generation gas separations via innovative adsorption technologies. This project aims to develop new gas separation technologies that combine novel materials and pressure swing adsorption cycles to deliver inexpensive industrial processes capable of both high recovery and high purity products. The project will advance our ability to manipulate the phenomenon of regulated guest admission into microporous materials, and integrate such materials within new types of dual-reflux adsorption cycles ....Next generation gas separations via innovative adsorption technologies. This project aims to develop new gas separation technologies that combine novel materials and pressure swing adsorption cycles to deliver inexpensive industrial processes capable of both high recovery and high purity products. The project will advance our ability to manipulate the phenomenon of regulated guest admission into microporous materials, and integrate such materials within new types of dual-reflux adsorption cycles that deliver multiple refined gas products. Successful implementation of these industrial developments will increase Australia's access to cheap supplies of natural gas, encourage the broader use of biomass, lower the carbon emissions of industrial processes, and efficiently recover high-value compounds only present at trace concentrations.Read moreRead less
Crusty Seabeds: From (Bio-)Genesis To Reliable Offshore Design. The project aims to make deep water oil and gas developments safer and cheaper by understanding better the unique seabed ‘crust’ conditions that occur in Australian waters. By studying the biogenic, structural and mechanical properties of deepwater crusts in more detail than can be done in ‘live’ oil and gas projects, this project expects to make a step change in the understanding of these seabed crusts. Expected outcomes of this pr ....Crusty Seabeds: From (Bio-)Genesis To Reliable Offshore Design. The project aims to make deep water oil and gas developments safer and cheaper by understanding better the unique seabed ‘crust’ conditions that occur in Australian waters. By studying the biogenic, structural and mechanical properties of deepwater crusts in more detail than can be done in ‘live’ oil and gas projects, this project expects to make a step change in the understanding of these seabed crusts. Expected outcomes of this project include developing new seabed investigation and design approaches for these soils. This should provide significant benefits, by facilitating the design and installation of low-risk, yet low cost seabed infrastructure (e.g. pipelines, risers, shallow foundations etc.) in these problematical seabed typesRead moreRead less
Four Stage Permeability Evolution Theory for Low Permeable Rocks . There is a degree of public anxiety on how unconventional gases is extracted. Horizontal drilling and hydraulic fracturing are two key enabling technologies to extract unconventional gases. But, the current study reveals well and field productivities exhibit steep declines. This implies that current practice may not be sustainable. The successful completion of this project will provide a scientific approach to look at the susta ....Four Stage Permeability Evolution Theory for Low Permeable Rocks . There is a degree of public anxiety on how unconventional gases is extracted. Horizontal drilling and hydraulic fracturing are two key enabling technologies to extract unconventional gases. But, the current study reveals well and field productivities exhibit steep declines. This implies that current practice may not be sustainable. The successful completion of this project will provide a scientific approach to look at the sustainability issue through testing a hypothesis that the properties of rock blocks between hydraulic fractures determine the sustainability of gas production instead of hydraulic fracturing. Read moreRead less
Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to b ....Novel multiple-constraint model for green buildings and life-cycle analyses. This project aims to develop a multiple-constraint automation model to perform life-cycle analyses for projects in the Australian construction industry. The model will optimise construction methods for green-building implementation and offer a realistic approach to Green-star status achievement. The Life-cycle model analyses for cost, greenhouse-gas emissions and energy consumption allowing the construction methods to be optimised for minimum environmental impact. Utilisation of the model should significantly shape an organisations’ strategic planning, while a recognised high Green-star status from Green Building Council of Australia will improve their reputation and bring benefits to the construction industry.Read moreRead less
Jurassic arc? Reconstructing the lost world of Eastern Australia. This project aims to resolve a long-standing enigma about the geological formation of the Great Artesian Basin – Australia’s most important onshore reservoir for groundwater and hydrocarbon resources. Specifically, the project will integrate sedimentological and geochemical studies to investigate the geodynamic configuration of Eastern Australia during the Jurassic Period of basin formation. The intended outcomes are an improved u ....Jurassic arc? Reconstructing the lost world of Eastern Australia. This project aims to resolve a long-standing enigma about the geological formation of the Great Artesian Basin – Australia’s most important onshore reservoir for groundwater and hydrocarbon resources. Specifically, the project will integrate sedimentological and geochemical studies to investigate the geodynamic configuration of Eastern Australia during the Jurassic Period of basin formation. The intended outcomes are an improved understanding of the evolution of the Australian continent and better knowledge of the formation of intercontinental sedimentary basins, which includes better assessment of their potential to contain hydrocarbon resources.Read moreRead less
Breaking bad oilfield emulsions. This project aims to use a solution of natural oil resin extract in carbon dioxide to break problematic water-in-crude oil emulsions with no secondary environmental consequences. Extracted crude oil contains water, which can result in problematic water-in-crude oil emulsions. These can be difficult to break into separate water and oil phases with potentially severe economic and environmental consequences. In Australia, such oilfield emulsion problems are frequent ....Breaking bad oilfield emulsions. This project aims to use a solution of natural oil resin extract in carbon dioxide to break problematic water-in-crude oil emulsions with no secondary environmental consequences. Extracted crude oil contains water, which can result in problematic water-in-crude oil emulsions. These can be difficult to break into separate water and oil phases with potentially severe economic and environmental consequences. In Australia, such oilfield emulsion problems are frequently encountered in both the Bass Strait and across the Carnarvon Basin. The treatment option proposed will target both asphaltene and silt stabilised water-in-oil emulsions and will be readily deployable.Read moreRead less
Development of novel inerter-based damper for platform vibration control. This project aims to develop a novel inerter-based damper to mitigate the excessive vibrations of offshore floating platforms (OFP), which are widely used in the offshore industry for oil exploration. Harsh environmental loads such as wind and waves can induce excessive vibrations to OFPs and endanger their safety and stability. This project aims to develop a novel inerter-based damper that can produce a considerable appar ....Development of novel inerter-based damper for platform vibration control. This project aims to develop a novel inerter-based damper to mitigate the excessive vibrations of offshore floating platforms (OFP), which are widely used in the offshore industry for oil exploration. Harsh environmental loads such as wind and waves can induce excessive vibrations to OFPs and endanger their safety and stability. This project aims to develop a novel inerter-based damper that can produce a considerable apparent mass that is much larger than its physical mass through an amplifying mechanism by translating the linear motion into high-speed rotational motion, which can significantly reduce the mass and cost of the damper. Benefits of the project include more economical and safer OFP designs, which are expected to improve the competitiveness of Australian pillar oil and gas industries.Read moreRead less
Real-time global optimisation for distributed parameter control systems. This project aims to develop real-time optimal control algorithms for distributed parameter systems involving both time and spatial variables and multiple time-delays, with a focus on mining and energy applications. Current optimal control algorithms for such systems are too slow for real-time use and often get trapped at local optima, which can be vastly inferior to the global solution. This project will result in a new op ....Real-time global optimisation for distributed parameter control systems. This project aims to develop real-time optimal control algorithms for distributed parameter systems involving both time and spatial variables and multiple time-delays, with a focus on mining and energy applications. Current optimal control algorithms for such systems are too slow for real-time use and often get trapped at local optima, which can be vastly inferior to the global solution. This project will result in a new optimal control framework, underpinned by recent advances in constraint propagation, switching surface optimisation, and input regularisation. It will result in cutting-edge mathematical tools to complement and exploit new technologies and optimise key processes in natural gas liquefaction and zinc and alumina production, increasing efficiency and reducing the ecological footprint. This project will lead to new cutting-edge control algorithms for replacing the inefficient manual operations endemic in Australia’s natural gas and mineral processing plants.Read moreRead less
Constricted hydraulic fracture opening. This project aims to develop experimentally verified models for designing and monitoring of hydraulic fractures with constricted openings, to ensure adequate and robust hydraulic fracture control for example in petroleum production. Hydraulic fractures are often constricted by bridges that hold two sides of the fracture together. Failure to account for bridges and constriction of fractures can lead to premature screen-out (exceeding available pump pressure ....Constricted hydraulic fracture opening. This project aims to develop experimentally verified models for designing and monitoring of hydraulic fractures with constricted openings, to ensure adequate and robust hydraulic fracture control for example in petroleum production. Hydraulic fractures are often constricted by bridges that hold two sides of the fracture together. Failure to account for bridges and constriction of fractures can lead to premature screen-out (exceeding available pump pressure) of proppant and inadequate fracking control. The project results are expected to substantially increase the accuracy of design and monitoring of fracture opening, geometry and fluid flow to improve efficiency, safety and environmental security of the resource and energy extraction.Read moreRead less
Fluid-induced creation and decay of porosity and permeability in minerals. This project aims to investigate the role of hydrothermal fluids in the creation and decay of porosity and permeability in minerals. By developing new experimental techniques and undertaking experimental studies mimicking natural conditions, this project expects to generate knowledge of the fundamental relationships between fluid-mineral reactions, pore creation and decay, pore geometry and connectivity, and the mechanism ....Fluid-induced creation and decay of porosity and permeability in minerals. This project aims to investigate the role of hydrothermal fluids in the creation and decay of porosity and permeability in minerals. By developing new experimental techniques and undertaking experimental studies mimicking natural conditions, this project expects to generate knowledge of the fundamental relationships between fluid-mineral reactions, pore creation and decay, pore geometry and connectivity, and the mechanism for the formation of fluid inclusions. This should provide significant benefits such as a deeper understanding of the hydrothermal fluids flowing through tight rocks in the Earth’s crust to form orebodies, and provide a scientific basis to underpin the development of greener technologies for recovering natural resources.Read moreRead less