Ageing of pile shaft friction in sand. Piles driven in sand are very commonly used to support structures in Australia. Their design, however, is based on pile capacities measured shortly after installation - even though capacities are observed to increase significantly with time. This proposal seeks to develop a methodology through which the effects of time can be incorporated in design and hence lead to cheaper foundation solutions.
Numerical prediction of train and vehicle induced ground vibrations and their effects on structures. This project will develop an innovative new method based on coupled finite element and scaled boundary finite-element analysis for predicting the ground vibrations induced by road traffic and underground or surface trains. The method will have immediate application in transportation engineering to predict traffic-induced ground vibrations, in geotechnical engineering to design isolation trenches ....Numerical prediction of train and vehicle induced ground vibrations and their effects on structures. This project will develop an innovative new method based on coupled finite element and scaled boundary finite-element analysis for predicting the ground vibrations induced by road traffic and underground or surface trains. The method will have immediate application in transportation engineering to predict traffic-induced ground vibrations, in geotechnical engineering to design isolation trenches and wave barriers to dissipate wave propagation, and in structural engineering to estimate in-structure vibration level and design isolators for sensitive equipment housed within. The technique will involve fundamental advances in the scaled boundary finite-element method, as calculations will be performed in a moving reference frame.Read moreRead less
Reducing geotechnical design conservatism to secure floating wind energy. The next frontier for offshore wind energy is moving further out to sea to avail of stronger and more consistent wind speeds. In these water depths, wind turbines are installed on floaters tethered to anchors in the seabed. Geotechnical design of anchors is inherently conservative, having been shaped by technical and economic considerations of oil and gas facilities. The offshore wind energy industry cannot afford to adopt ....Reducing geotechnical design conservatism to secure floating wind energy. The next frontier for offshore wind energy is moving further out to sea to avail of stronger and more consistent wind speeds. In these water depths, wind turbines are installed on floaters tethered to anchors in the seabed. Geotechnical design of anchors is inherently conservative, having been shaped by technical and economic considerations of oil and gas facilities. The offshore wind energy industry cannot afford to adopt such conservatism if floating wind is to become commercially viable. This project will, through numerical developments, geotechnical centrifuge modelling and field testing, develop the science that will lead to a reliability-based geotechnical design approach to make floating offshore wind energy economic and viable.Read moreRead less
Unlocking new generation physical modelling with realistic soil response. This project will improve the safety and efficiency of geo-structures associated with offshore wind developments by better characterising and replicating the behaviour of carbonate sediments. Novel characterisation techniques will be used to better understand the links between the chemical and structural composition of the sediments and their engineering properties relevant to geotechnical design, and how to better replica ....Unlocking new generation physical modelling with realistic soil response. This project will improve the safety and efficiency of geo-structures associated with offshore wind developments by better characterising and replicating the behaviour of carbonate sediments. Novel characterisation techniques will be used to better understand the links between the chemical and structural composition of the sediments and their engineering properties relevant to geotechnical design, and how to better replicate carbonate sediment behaviour in a laboratory – an outcome that has eluded researchers for decades. The main outcomes of the project will be the development of soil sample reconstitution techniques enabling high-fidelity physical modelling to be undertaken to assist in the design offshore wind turbine foundations.Read moreRead less
Follower-embedded plate anchors to underpin economic development in ultra deep water. Oil and gas is a key Australian industry, worth over $15 billion annually. In order to maintain current hydrocarbon production levels, Australian offshore oil and gas companies are extending their capabilities beyond the 2000 metre water depth limit. The offshore industry has identified economic and geotechnical limitations of current anchoring technology to be the major challenge that must be overcome in order ....Follower-embedded plate anchors to underpin economic development in ultra deep water. Oil and gas is a key Australian industry, worth over $15 billion annually. In order to maintain current hydrocarbon production levels, Australian offshore oil and gas companies are extending their capabilities beyond the 2000 metre water depth limit. The offshore industry has identified economic and geotechnical limitations of current anchoring technology to be the major challenge that must be overcome in order to make this transition into deep and ultra-deep water. The research proposed in this project focuses directly on this critical issue, with potential for immediate application to the Australian offshore oil and gas industry, and ensuring the continued viability of the key oil and gas industry in Australia.Read moreRead less
Mechanisms controlling displacement pile behaviour in sands. The project will exploit the potential of the drum centrifuge and recent innovations in earth pressure cell design to provide a uniquely comprehensive investigation into the factors controlling the performance of displacement piles in sand. A wide range of factors affecting the stresses that develop at the pile-soil interface will be examined in a systematic fashion to facilitate the derivation of more reliable and efficient design app ....Mechanisms controlling displacement pile behaviour in sands. The project will exploit the potential of the drum centrifuge and recent innovations in earth pressure cell design to provide a uniquely comprehensive investigation into the factors controlling the performance of displacement piles in sand. A wide range of factors affecting the stresses that develop at the pile-soil interface will be examined in a systematic fashion to facilitate the derivation of more reliable and efficient design approaches for piles.Read moreRead less
Numerical Modelling of Three-dimensional Scour below Offshore Pipelines. Australia's increasing offshore oil and gas exploration has demanded more accurate and reliable methods for evaluating the safety and serviceability of pipelines. Local scour around pipelines is one of the major causes of pipeline failures, and is a major concern in Australian waters. This project not only addresses these concerns in its direct application to the design and management of offshore pipelines, but also will co ....Numerical Modelling of Three-dimensional Scour below Offshore Pipelines. Australia's increasing offshore oil and gas exploration has demanded more accurate and reliable methods for evaluating the safety and serviceability of pipelines. Local scour around pipelines is one of the major causes of pipeline failures, and is a major concern in Australian waters. This project not only addresses these concerns in its direct application to the design and management of offshore pipelines, but also will contribute to the nation's development and competitiveness in offshore exploration, and produce high quality research students. The improved design and management of pipelines in Australian waters will reduce the risk of potential environmental damages caused by leaking gas and oil.Read moreRead less
Building Australia's Offshore Oil and Gas Industry on Solid Foundations: characterising multilayered soils for offshore foundation design. This project aims to characterise soils with multilayers for offshore foundation designs. The commonly used site investigation tools, cone, T-bar and ball penetrometers, will be studied using advanced large deformation finite element analysis and novel centrifuge technics. The outcome of this study will provide guidelines to interpret soil layer information a ....Building Australia's Offshore Oil and Gas Industry on Solid Foundations: characterising multilayered soils for offshore foundation design. This project aims to characterise soils with multilayers for offshore foundation designs. The commonly used site investigation tools, cone, T-bar and ball penetrometers, will be studied using advanced large deformation finite element analysis and novel centrifuge technics. The outcome of this study will provide guidelines to interpret soil layer information and soil design parameters from site investigation data, that is, penetrometers’ penetration resistance profiles. The guidelines will fill the knowledge gap in this area and will provide offshore design engineers with more reliable soil parameters for safer and more economical foundation designs.Read moreRead less
Shallow foundation solutions for offshore oil and gas facilities. This research will develop reliable predictions of limit loads for offshore skirted shallow foundations to replace current industry design guidelines that are excessively conservative. This project has direct application to the design of the range of established skirted shallow foundation systems for offshore structures as well as new concept hybrid production platforms and liquefied natural gas terminals designed to be buoyant af ....Shallow foundation solutions for offshore oil and gas facilities. This research will develop reliable predictions of limit loads for offshore skirted shallow foundations to replace current industry design guidelines that are excessively conservative. This project has direct application to the design of the range of established skirted shallow foundation systems for offshore structures as well as new concept hybrid production platforms and liquefied natural gas terminals designed to be buoyant after offloading, thus imparting a sustained uplift on the foundation. The direct economic benefit of this research would be in the region of $3-5M per project. Continued development of Australia's offshore resources will provide jobs for many Australians and sustain an essential market of the Australian economy.Read moreRead less
Application of field penetrometer data to offshore geotechnical design in deep water. Offshore oil and gas extraction is a $17 billion/year industry and a major component of GDP, but facing increasing challenges in Australia as exploration extends into water depths exceeding 1 km. In order to develop safe and economic facilities in these environments, solutions to significant technical challenges are required, ranging from new technology to assess the strength of seabed soils, to formulating res ....Application of field penetrometer data to offshore geotechnical design in deep water. Offshore oil and gas extraction is a $17 billion/year industry and a major component of GDP, but facing increasing challenges in Australia as exploration extends into water depths exceeding 1 km. In order to develop safe and economic facilities in these environments, solutions to significant technical challenges are required, ranging from new technology to assess the strength of seabed soils, to formulating response models for oil and gas pipelines and shallow foundations or anchoring systems. This project contributes to future exploitation of offshore hydrocarbon reserves while minimising impact on the marine environment; it brings direct benefits to our economy and helps maintain our world leadership in offshore geotechnical research.Read moreRead less