Direct geothermal energy: Reducing the rural industries’ carbon footprint. Direct geothermal energy: Reducing the rural industries’ carbon footprint. This project aims to design poultry brooder houses using geothermal technology. Reducing greenhouse gas emissions is a global priority. The lack of natural gas in rural areas and brooder houses’ heating and cooling needs make geothermal ideal. Direct geothermal systems use shallow ground both as a heat source and as a heat sink for cooling, using h ....Direct geothermal energy: Reducing the rural industries’ carbon footprint. Direct geothermal energy: Reducing the rural industries’ carbon footprint. This project aims to design poultry brooder houses using geothermal technology. Reducing greenhouse gas emissions is a global priority. The lack of natural gas in rural areas and brooder houses’ heating and cooling needs make geothermal ideal. Direct geothermal systems use shallow ground both as a heat source and as a heat sink for cooling, using heat pumps. Their application to poultry brooder houses could reduce electricity consumption by up to 75% and thus greenhouse gas emissions, since 91% of electricity comes from fossil fuels in Australia; minimise the need for expensive bottled gas heating; reduce the levels of ammonia emissions; and increase farm productivity.Read moreRead less
Combined strategies to extinguish underground coal fires and to extract geothermal energy. This project addresses two serious environmental issues that occur worldwide. Firstly, it aims to develop strategies to combat underground coal fires which are a serious environmental problem. It has been estimated that underground coal fires in China alone contribute 2 to 3 per cent of the total world output of carbon dioxide (CO2) from burning fossil fuel. Concentrations of CO2 and CO (carbon monoxide) o ....Combined strategies to extinguish underground coal fires and to extract geothermal energy. This project addresses two serious environmental issues that occur worldwide. Firstly, it aims to develop strategies to combat underground coal fires which are a serious environmental problem. It has been estimated that underground coal fires in China alone contribute 2 to 3 per cent of the total world output of carbon dioxide (CO2) from burning fossil fuel. Concentrations of CO2 and CO (carbon monoxide) of up to 2200 ppm and 1000 ppm, respectively, have been measured in gases produced by underground coal fires. Secondly, the project is a proof of concept to validate the feasibility of production of geothermal energy from burning coal seams. This aspect has the potential to harvest large amounts of geothermal energy which is currently wasted.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE150100058
Funder
Australian Research Council
Funding Amount
$560,000.00
Summary
Three dimensionally compressed and monitored Hopkinson bar . 3D compressed and monitored Hopkinson bar: The 3D compressed and monitored Hopkinson bar allows determination of the dynamic mechanical properties and fracturing behaviour of materials under such confinement. Understanding material behaviour under dynamic loading is essential in dealing with many engineering problems as excavation, fragmentation, earthquake, blasting, and structure design. In geotechnical and structure projects, materi ....Three dimensionally compressed and monitored Hopkinson bar . 3D compressed and monitored Hopkinson bar: The 3D compressed and monitored Hopkinson bar allows determination of the dynamic mechanical properties and fracturing behaviour of materials under such confinement. Understanding material behaviour under dynamic loading is essential in dealing with many engineering problems as excavation, fragmentation, earthquake, blasting, and structure design. In geotechnical and structure projects, materials are often subjected to existing confining stresses. The full-field optical techniques, with an ultra-high speed and resolution camera in the system, aims to assist the quantitative measurement of deformation fields including small strain induced in brittle material's failure and identification of constitutive parameters.Read moreRead less
Harnessing the power of oceans: anchors for floating energy devices. This project aims to establish a geotechnical design framework for shared anchoring systems subjected to multidirectional cyclic loading for large integrated arrays of floating wind turbines and floating wave energy converters. This is expected to facilitate new, economic foundation solutions, generating radical cost savings to help unlock Australia's renewable ocean energy resources. The project aims to utilise a blend of stat ....Harnessing the power of oceans: anchors for floating energy devices. This project aims to establish a geotechnical design framework for shared anchoring systems subjected to multidirectional cyclic loading for large integrated arrays of floating wind turbines and floating wave energy converters. This is expected to facilitate new, economic foundation solutions, generating radical cost savings to help unlock Australia's renewable ocean energy resources. The project aims to utilise a blend of state-of-the-art centrifuge modelling techniques and numerical modelling, incorporating an energy-based method and yield envelopes. This innovative methodology aims to establish a validated framework for understanding and predicting foundation performance under the complex load histories arising in renewable ocean energy applications.Read moreRead less
Determination of the condition and strength capacity of in-service timber poles in energy networks. The project addresses an important issue facing power industries and engineering community worldwide, that is, reliable and optimal management of power distribution infrastructures. The outcomes lead to new technologies that not only provide great social-economic benefits but advance knowledge and practice of the research at international level.
Discovery Early Career Researcher Award - Grant ID: DE150101751
Funder
Australian Research Council
Funding Amount
$351,000.00
Summary
Nanofiller reinforced concrete for high performance thermal energy storage. Harnessing the abundance of solar energy has been one of the most attractive energy alternatives. This project aims to investigate the mechanical properties, thermal energy storage capacity, thermal conductivity, long-term durability and nano/microstructural changes in nanofiller reinforced concrete composites using modern characterisation and modelling techniques. The newly developed concrete will be accessed as a therm ....Nanofiller reinforced concrete for high performance thermal energy storage. Harnessing the abundance of solar energy has been one of the most attractive energy alternatives. This project aims to investigate the mechanical properties, thermal energy storage capacity, thermal conductivity, long-term durability and nano/microstructural changes in nanofiller reinforced concrete composites using modern characterisation and modelling techniques. The newly developed concrete will be accessed as a thermal energy storage medium for concentrated solar energy plants. The project aims to create the next generation of construction materials to reduce the cost of the storage medium for solar energy harvesting.Read moreRead less
Sustainable Technology for Removal of Trace Contaminants in Rural Water Supplies. Provision of safe drinking water treatment using sustainable technology which can be applied in rural locations and emergency situations is the main aim of this project. A hybrid membrane process will be combined with solar energy for the removal of pathogens and trace pollutants such as uranium, fluoride, arsenic, boron and nitrates. The technology will be designed for remote community situations and hence be robu ....Sustainable Technology for Removal of Trace Contaminants in Rural Water Supplies. Provision of safe drinking water treatment using sustainable technology which can be applied in rural locations and emergency situations is the main aim of this project. A hybrid membrane process will be combined with solar energy for the removal of pathogens and trace pollutants such as uranium, fluoride, arsenic, boron and nitrates. The technology will be designed for remote community situations and hence be robust and low in maintenance. Using solar energy is a challenge for trace contaminant removal as the operating conditions vary with the power fluctuations, which presents a substantially different situation to grid power connection.Read moreRead less
Lightly Loaded Energy Farm Foundations in Cracked Desiccated Soil. This project aims are to understand the effects of seasonal changes in moisture on piles in clayey soils that develop desiccation cracks during dry times of the year. The project is significant because the economics of energy farms requires low cost foundations for their viability, but current methods of foundation design require long piles to overcome uncertainties in capacity and serviceability when soil shrinks in dry periods ....Lightly Loaded Energy Farm Foundations in Cracked Desiccated Soil. This project aims are to understand the effects of seasonal changes in moisture on piles in clayey soils that develop desiccation cracks during dry times of the year. The project is significant because the economics of energy farms requires low cost foundations for their viability, but current methods of foundation design require long piles to overcome uncertainties in capacity and serviceability when soil shrinks in dry periods and swells in wetter periods. The main outcome of the project will be recommendations for the design of lightly loaded pile foundations in soils that shrink and swell significantly. The benefits will be the reduced risk and cost associated with the geotechnical aspects of foundation design.Read moreRead less
Computational modelling of hydraulic fracture. The project aims to develop new computational methods and software for simulating hydraulic fracture (commonly known as 'fracking'), which is now being used to extract natural gas from some Australian coal seams. This form of natural gas recovery has the potential to be a major economic driver, but the benefits are currently being tempered by widespread community concern over possible adverse impacts on the environment. The expected outcome is new m ....Computational modelling of hydraulic fracture. The project aims to develop new computational methods and software for simulating hydraulic fracture (commonly known as 'fracking'), which is now being used to extract natural gas from some Australian coal seams. This form of natural gas recovery has the potential to be a major economic driver, but the benefits are currently being tempered by widespread community concern over possible adverse impacts on the environment. The expected outcome is new methods, supported by scientific publications and software, which can be used to guide the natural gas industry and inform regulatory authorities of the risks inherent in hydraulic fracturing.Read moreRead less
Large-scale geotechnical analysis of new and aged pipeline infrastructure. This project aims to develop novel computational methods for predicting failure rates in geographically distributed pipeline networks affected by ground movements, one of the main triggers of bursts and leakages in buried pipe infrastructure. The project will be based on a blend of experimental work and development of simulation tools to quantify the coupled effects of pipe deterioration, poor backfilling and ground movem ....Large-scale geotechnical analysis of new and aged pipeline infrastructure. This project aims to develop novel computational methods for predicting failure rates in geographically distributed pipeline networks affected by ground movements, one of the main triggers of bursts and leakages in buried pipe infrastructure. The project will be based on a blend of experimental work and development of simulation tools to quantify the coupled effects of pipe deterioration, poor backfilling and ground movements in aged and new pipelines. The results will feed towards the formulation of a framework for the large-scale stress analysis of segmented and continuous pipes, capable of using as input high-resolution geospatial observations and predictions of ground movements.Read moreRead less