High performance metal oxide inks for printable memory arrays . This project aims to develop next generation printable memory devices with low cost and excellent stability. The goal will be achieved by developing a new class of metal oxide nanomaterials based inks and large scale printing technology, through optimizing the synthesis, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in flexible electronics, significa ....High performance metal oxide inks for printable memory arrays . This project aims to develop next generation printable memory devices with low cost and excellent stability. The goal will be achieved by developing a new class of metal oxide nanomaterials based inks and large scale printing technology, through optimizing the synthesis, printing process and electrode configuration. The expected outcomes will be new electronic materials for a wide range of end uses in flexible electronics, significant advances in energy efficient data storage devices, and commercialisation of the technology to Australian industries.Read moreRead less
Haemodynamic investigation of flow diverter stents for the treatment of intracranial aneurysms. This project will explore the engineering of a flow diverter, an endovascular device for the treatment of brain aneurysms. The project will determine the optimal design of new types of flow diverters, which in turn could improve the effectiveness of treatments, thus reducing the associated costs of cerebral haemorrhage and stroke.
Development of inert gas ion beams for fabrication of nano-structures. This project will develop a high brightness, high density ion beam for reactive fabrication of structures with dimensions of the order of and less than 100 nano-metres. Present systems use liquid metal ion sources which can pollute the substrates being fabricated. Use of inert gas ions will overcome this problem and lead to a new type of ion source to replace the older systems. Added advantages include significantly increased ....Development of inert gas ion beams for fabrication of nano-structures. This project will develop a high brightness, high density ion beam for reactive fabrication of structures with dimensions of the order of and less than 100 nano-metres. Present systems use liquid metal ion sources which can pollute the substrates being fabricated. Use of inert gas ions will overcome this problem and lead to a new type of ion source to replace the older systems. Added advantages include significantly increased lifetime much higher reproducibility. Our commercial collaborator, FEI Company, estimate the world market as being $US100,000,000 and will actively promote this technology worldwide when it is fully developed.Read moreRead less
Switching mechanisms in nonvolatile resistive memory using high-k dielectrics. Growth in the use of portable electronic devices, such as cameras, phones and MP3 players has resulted in an increased demand for low-power, high-density, non-volatile memory (NVM). One class of such memories aims to use resistance changes in thin dielectric films as a means of storing information. This project aims to develop a better understanding of these devices and to develop new and innovative processes for co ....Switching mechanisms in nonvolatile resistive memory using high-k dielectrics. Growth in the use of portable electronic devices, such as cameras, phones and MP3 players has resulted in an increased demand for low-power, high-density, non-volatile memory (NVM). One class of such memories aims to use resistance changes in thin dielectric films as a means of storing information. This project aims to develop a better understanding of these devices and to develop new and innovative processes for controlling data storage. The project is based on collaboration between researchers at the ANU and Silanna, an Australian start-up company aiming to develop and commercialise such technology.Read moreRead less
A novel approach to direct nanopatterning of silicon for advanced phase-changed devices. This project will exploit key research developments at ANU in the field of nanotechnology, specifically nanofabrication of entirely new devices. In particular, this work will be exploited by a new Australian high-tech company, WRiota, to produce novel silicon phase change devices. The instrumentation developments will be commercialized by a leading nanoindentation company and the materials and device-related ....A novel approach to direct nanopatterning of silicon for advanced phase-changed devices. This project will exploit key research developments at ANU in the field of nanotechnology, specifically nanofabrication of entirely new devices. In particular, this work will be exploited by a new Australian high-tech company, WRiota, to produce novel silicon phase change devices. The instrumentation developments will be commercialized by a leading nanoindentation company and the materials and device-related outcomes and IP will be retained and used by WRiota. This project will further provide valuable opportunities for a number of research students and ECRs to gain experience in both the industrial and academic worlds.Read moreRead less
Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aim ....Implant Isolation of III-V Compound Semiconductor Devices and Structures. Individual devices in an integrated circuit can be electrically isolated from each other by irradiating the materials between them with high energy ions. This creates defects in the semiconductor that trap charge carriers and thereby increase the resistance of the material. However, the effectiveness of this process depends on the material as well as irradiation and post-irradiation processing conditions. This project aims to develop an implant isolation scheme for a new class of devices developed by Epitactix, an Australian start-up company founded on CSIRO research. This will be achieved by combining the ANU's experience and expertise in ion-irradiation and defect engineering with the device and processing expertise of Epitactix Pty Ltd.Read moreRead less
High-cadence near-infrared imaging. This project aims to deploy a cryogenic camera system to improve the outputs of astronomical telescopes. The system is equipped with an emerging detector technology, a near-infrared Avalanche Photo-Diode array, capable of high cadence imaging with frame rates of 10 - 1,000 Hz at a wavelength of around 2.2 microns. This new technology is a key component to the future of adaptive optics systems for astronomical telescopes as it allows the rapid measurements nece ....High-cadence near-infrared imaging. This project aims to deploy a cryogenic camera system to improve the outputs of astronomical telescopes. The system is equipped with an emerging detector technology, a near-infrared Avalanche Photo-Diode array, capable of high cadence imaging with frame rates of 10 - 1,000 Hz at a wavelength of around 2.2 microns. This new technology is a key component to the future of adaptive optics systems for astronomical telescopes as it allows the rapid measurements necessary to correct the image blurring introduced by the Earth's atmosphere. No expertise currently exists in Australia with this new technology. Capitalising on previous investment, the camera system is intended to fill a capability gap in local expertise and to ensure the potential of the next generation of telescopes is realised and strengthen our competitive edge for frontier instrumentation across the wider Australian imaging community.Read moreRead less
Exploiting deep sub-surface temperature-induced phase-transformations for an improved approach to semiconductor laser-dicing. This project aims to explore sub-surface laser-induced phase transformations in semiconductors and to exploit this novel method for ultra-fine laser cutting of semiconductor wafers without debris. The outcomes will be understanding new temperature-induced material modifications and innovative technology development relevant for the semiconductor industry.
High-brightness wavelength tuneable lasers for quantum science. This project aims to establish the capability to manufacture application-specific semiconductor lasers. The project will use existing facilities in Australia to enhance our world-leading quantum science research, and establish a viable export-dominated high-tech manufacturing business. Semiconductor lasers are a critical enabling technology for many scientific applications, particularly for quantum science including quantum computin ....High-brightness wavelength tuneable lasers for quantum science. This project aims to establish the capability to manufacture application-specific semiconductor lasers. The project will use existing facilities in Australia to enhance our world-leading quantum science research, and establish a viable export-dominated high-tech manufacturing business. Semiconductor lasers are a critical enabling technology for many scientific applications, particularly for quantum science including quantum computing and quantum sensing. This project is expected to enable the establishment of a high-tech manufacturing capability to support Australia's leading role in quantum science, and expand our scientific instrumentation exports to new and rapidly developing applications such as magnetic sensing and imaging at nanoscale, quantum communication and computation.Read moreRead less
An atom-scale fabrication technique for diamond quantum microprocessors. This project aims to develop an atomically-precise fabrication technique for the production of diamond quantum microprocessors through the pursuit of a novel bottom-up approach. This project expects to create significant new knowledge and capability in precision diamond growth, surface chemistry, electronics and characterisation, establish a long-term strategic partnership between Quantum Brilliance and the participating or ....An atom-scale fabrication technique for diamond quantum microprocessors. This project aims to develop an atomically-precise fabrication technique for the production of diamond quantum microprocessors through the pursuit of a novel bottom-up approach. This project expects to create significant new knowledge and capability in precision diamond growth, surface chemistry, electronics and characterisation, establish a long-term strategic partnership between Quantum Brilliance and the participating organisations, and enable the realisation of high-performance quantum microprocessors. These outcomes will potentially deliver Australia and Quantum Brilliance a profound advantage in quantum computing, thereby securing their positions in the emerging global quantum market and the associated economic and security benefits.Read moreRead less