Application of ultra-high stability cryogenic sapphire oscillators to Very Long Baseline Interferometry. This project will develop a state-of-the-art commercial prototype of the cryogenic sapphire oscillator (CSO) optimised for use at remote sites. Proof of operation will be applied to the important niche market of Very-Long Baseline Interferometry (VLBI) radio astronomy, with improvements in image quality. The research will also significantly benefit the Australian bid for the SKA project, as ....Application of ultra-high stability cryogenic sapphire oscillators to Very Long Baseline Interferometry. This project will develop a state-of-the-art commercial prototype of the cryogenic sapphire oscillator (CSO) optimised for use at remote sites. Proof of operation will be applied to the important niche market of Very-Long Baseline Interferometry (VLBI) radio astronomy, with improvements in image quality. The research will also significantly benefit the Australian bid for the SKA project, as the CSO is the only technology capable of synchronising the outputs of the telescopes arrays to the required signal to noise to attain the required image quality. The project will further Australia's status in radio astronomy as a world leader and add to our exports of precision scientific instruments.Read moreRead less
Application of Femtosecond Light Sources to Generation of Low Noise Microwave Signals. The main goal of the research project is to develop prototypes of photonic oscillators capable of generating spectrally pure signals both at optical and microwave frequencies. The project is also aimed at understanding noise mechanisms affecting frequency stability of classical microwave oscillators based on sapphire loaded cavity resonators. By cryogenically cooling such resonators we plan to create a new fam ....Application of Femtosecond Light Sources to Generation of Low Noise Microwave Signals. The main goal of the research project is to develop prototypes of photonic oscillators capable of generating spectrally pure signals both at optical and microwave frequencies. The project is also aimed at understanding noise mechanisms affecting frequency stability of classical microwave oscillators based on sapphire loaded cavity resonators. By cryogenically cooling such resonators we plan to create a new family of extremely low noise and economically viable microwave signal sources. The research proposed will enrich the field of oscillator frequency control, give rise to new techniques for precision noise measurements and reinforce Australia's position at the forefront of microwave and photonic science.Read moreRead less
Moving-beam phase retrieval - a route to better microscopy! This research will benefit the nation by improving the quality of x-ray diffraction and electron microscopy techniques available to Australian scientists. It will make it possible to examine microscopic structures in more detail and therefore gain more information about the atomic positions in these structures. This will greatly benefit research that depends on finding the structure of very small objects. Such research areas include ....Moving-beam phase retrieval - a route to better microscopy! This research will benefit the nation by improving the quality of x-ray diffraction and electron microscopy techniques available to Australian scientists. It will make it possible to examine microscopic structures in more detail and therefore gain more information about the atomic positions in these structures. This will greatly benefit research that depends on finding the structure of very small objects. Such research areas include nanomaterials, biological engineering, medical science and materials science. The work is also expected to have industrial applications and to make an important contribution to the development of the synchrotron science industry in Australia.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0347462
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Femtosecond laser micromachining facility. The proposed establishment of a femtosecond laser micromachining facility, with microdiagnostic capabilities, will facilitate a range of projects involving fabrication of submicron structures in metals, polymers, glasses, ceramics and crystalline materials. This facility, unique in Australia , will be comparable to the best such facilities in the world, enabling researchers to apply new microfabrication techniques to a range of photonic and optoelectro ....Femtosecond laser micromachining facility. The proposed establishment of a femtosecond laser micromachining facility, with microdiagnostic capabilities, will facilitate a range of projects involving fabrication of submicron structures in metals, polymers, glasses, ceramics and crystalline materials. This facility, unique in Australia , will be comparable to the best such facilities in the world, enabling researchers to apply new microfabrication techniques to a range of photonic and optoelectronic devices, including laser-written optical planar waveguides, nonlinear components and photonic bandgap structures , and various biomedical microstructures. Outcomes will include demonstration and development of novel photonic/optoelectronic devices and of new techniques, crucial to cost-effective manufacture of photonic components.Read moreRead less
Optical supercontinuum generation from high pulse-energy optical sources. The aim of this project is to develop a broadband and high brightness optical fibre source based on optical supercontinuum generation (i.e. low-coherence optical signals with octave or more bandwidth). Unlike similar sources demonstrated recently which rely on expensive bulk femtosecond pump lasers, this source will be pumped by a large pulse-energy optical fibre laser and use stimulated Raman scattering to seed the contin ....Optical supercontinuum generation from high pulse-energy optical sources. The aim of this project is to develop a broadband and high brightness optical fibre source based on optical supercontinuum generation (i.e. low-coherence optical signals with octave or more bandwidth). Unlike similar sources demonstrated recently which rely on expensive bulk femtosecond pump lasers, this source will be pumped by a large pulse-energy optical fibre laser and use stimulated Raman scattering to seed the continuum generation. The primary outcome will be a compact low-cost all-fibre supercontinuum source with a wide range of applications in areas such as optical metrology, optical coherence tomography, and high resolution non-contact position and motion sensing.Read moreRead less
Ringed photonic crystal fibres for broadband nonlinear optics. The technology developed from this project will enable organic molecules to be detected, identified and quantified. Because the technology is compact, easily engineered and low cost, it will lead to a dramatically increased capability for infrared spectroscopic measurement throughout biology and medicine, with specific benefits in agriculture, the food industry and defence.
Advanced Atomic Sources for Precision Measurement. Many advances in our technology-driven society rely on the precision measurement of quantities such as accelerations, magnetic and electric fields. A higher level of measurement precision leads to a clear economic or strategic advantage. We expect to provide the Australian industrial and government sectors with new and better methods for making precise measurements with accelerometers, gyroscopes and gravity gradiometers. This proposal will pla ....Advanced Atomic Sources for Precision Measurement. Many advances in our technology-driven society rely on the precision measurement of quantities such as accelerations, magnetic and electric fields. A higher level of measurement precision leads to a clear economic or strategic advantage. We expect to provide the Australian industrial and government sectors with new and better methods for making precise measurements with accelerometers, gyroscopes and gravity gradiometers. This proposal will place Australia with only a handful of other countries as an international leader in the new technology of coherent atom interferometry. It is expected that this proposal will lead to innovative prototype devices as well as significant patentable technology. Read moreRead less
Vibration Isolation Technology and Instrumentaion for Geophysical Surveys. Many geophysical exploration instruments are limited in sensitivity by vibration induced noise. New techniques of vibration isolation have been shown to eliminate vibration induced noise in a vibrating wire magnetic gradiometer. This project will create fully integrated sensor ?isolation packages for airborne and underwater applications, both for gradiometers and for ground penetrating radars. The project will signific ....Vibration Isolation Technology and Instrumentaion for Geophysical Surveys. Many geophysical exploration instruments are limited in sensitivity by vibration induced noise. New techniques of vibration isolation have been shown to eliminate vibration induced noise in a vibrating wire magnetic gradiometer. This project will create fully integrated sensor ?isolation packages for airborne and underwater applications, both for gradiometers and for ground penetrating radars. The project will significantly benefit the mineral exploration industry as well as underwater detection of cables and ship wrecks.Read moreRead less
Measuring the linewidth enhancement factor and optical feedback level factor of semiconductor lasers based on optical feedback self-mixing interferometry. This project aims to develop a high performance solution for the challenging problem of measuring the linewidth enhancement factor (LEF) of semiconductor lasers (SLs) and the optical feedback level factor, C, for the optical feedback self-mixing (OFSM) systems. Specific outcomes of the research include (1) a new model for an optical feedback ....Measuring the linewidth enhancement factor and optical feedback level factor of semiconductor lasers based on optical feedback self-mixing interferometry. This project aims to develop a high performance solution for the challenging problem of measuring the linewidth enhancement factor (LEF) of semiconductor lasers (SLs) and the optical feedback level factor, C, for the optical feedback self-mixing (OFSM) systems. Specific outcomes of the research include (1) a new model for an optical feedback self-mixing effect, (2) a new approach for measuring LEF and C based on the proposed model, (3) signal processing algorithms for improving the performance of the proposed approach, and (4) an OFSM system prototype based on the new model and algorithms.Read moreRead less
Structure-Activity Relationships in Silicon-based Photovoltaics Through Atomic Scale Microscopy. This project aims to develop new design principles for silicon-based photovoltaics (PVs) through a comprehensive study of atomic-scale structures and phenomena in PV materials. The development of more efficient photovoltaic materials is of major global importance, given the pressing need for clean and renewable sources of energy. Australia has international leadership in developing solar cell technol ....Structure-Activity Relationships in Silicon-based Photovoltaics Through Atomic Scale Microscopy. This project aims to develop new design principles for silicon-based photovoltaics (PVs) through a comprehensive study of atomic-scale structures and phenomena in PV materials. The development of more efficient photovoltaic materials is of major global importance, given the pressing need for clean and renewable sources of energy. Australia has international leadership in developing solar cell technologies, and the ideal natural environment to exploit these technologies. The fundamental insights derived in this project, such as detailed 3D maps of dopant distributions at the atomic scale, will bolster Australia's international reputation in the field and provide better control in the design of PV devices. Read moreRead less