Conducting coatings for control and eradication of unwanted marine biofilms. Biofilms grow on all surfaces and environments posing environmental threats and economic issues globally, costing billions each year to those attempting to eradicate them. To date, biofilm's detailed response to variations in electrochemically generated redox stress and shear is unknown in marine environments. The project aims at (i) developing novel electrically conducting carbon based paints that are stable in marine ....Conducting coatings for control and eradication of unwanted marine biofilms. Biofilms grow on all surfaces and environments posing environmental threats and economic issues globally, costing billions each year to those attempting to eradicate them. To date, biofilm's detailed response to variations in electrochemically generated redox stress and shear is unknown in marine environments. The project aims at (i) developing novel electrically conducting carbon based paints that are stable in marine environments and (ii) investigating how marine biofilms respond to these coatings. The expected outcome of this project is the development of a green alternative antifouling technology that can be used on demand in marine applications. This provides a new solution for controlling the biofouling of surfaces immersed in oceans.Read moreRead less
Nanostrutured Magnesium-base Composites for High-density Hydrogen Storage. This project aims to develop nanocrstalline magnesium-based composites for effective hydrogen storage, overcoming two main technical barriers of current metal hydride systems: high charging/discharging temperature and slow kinetics. Nanoscale catalysts based on mesoporous carbons and metal nanoparticles will be introduced into the magnesium to increase storage capacity and increase the rate at low temperatures. Fundament ....Nanostrutured Magnesium-base Composites for High-density Hydrogen Storage. This project aims to develop nanocrstalline magnesium-based composites for effective hydrogen storage, overcoming two main technical barriers of current metal hydride systems: high charging/discharging temperature and slow kinetics. Nanoscale catalysts based on mesoporous carbons and metal nanoparticles will be introduced into the magnesium to increase storage capacity and increase the rate at low temperatures. Fundamental understanding on the effects of catalysts, and adsorption and desorption mechanisms will be obtained to optimise the composite materials. This project will lead to effective and practical technology for hydrogen storage that will meet the target of commercial fuel cell vehicles.Read moreRead less
Fine Structured Optical Fibre Fabrication - Soot, Rheology and Nanostructure in Modified Chemical Vapour Deposition. For 30 years photonics and telecommunications have relied heavily on optical fibres made by Modified Chemical Vapour Deposition (MCVD), a complex, highly dynamic process with many interacting variables, which is still more art than science. The results are good enough for most purposes but the next generation of photonics demands fibres with intricate, precisely defined internal s ....Fine Structured Optical Fibre Fabrication - Soot, Rheology and Nanostructure in Modified Chemical Vapour Deposition. For 30 years photonics and telecommunications have relied heavily on optical fibres made by Modified Chemical Vapour Deposition (MCVD), a complex, highly dynamic process with many interacting variables, which is still more art than science. The results are good enough for most purposes but the next generation of photonics demands fibres with intricate, precisely defined internal structures. A multi-disciplinary team will elucidate and quantify the exact nature of the fundamental science underlying MCVD - of silicate soot formation, deposition and heat treatment - and translate this into reproducibly fabricated fine structured fibres with high optical and mechanical performance.Read moreRead less
Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to ....Condition monitoring and process control of injection molding. Injection molding has been widely used in automotive industry and improvement of the productivity and quality of the products is very important for the injection molding production to be internationally competitive. The aim of this project is to develop a condition monitoring and process control system to monitor the key parameters of the injection molding processes, to optimise the design and process conditions, and consequently, to more actively control the processes. This will lead to an more reliable process, improved productivity and production of higher quality of moldings.Read moreRead less
PRODUCTION OF OPTIMAL MICROSTRUCTURED POLYMER OPTICAL FIBRE. Microstructured optical fibres have been described as the 'next generation' of optical fibres, because of their ability to produce tailorisable optical effects. Our success in producing these fibres in polymer was a world-first. This project will yield a fundamental understanding of the fabrication process, so that for any fibre design the optimal drawing conditions can be determined and maintained for extended draws. This will allow i ....PRODUCTION OF OPTIMAL MICROSTRUCTURED POLYMER OPTICAL FIBRE. Microstructured optical fibres have been described as the 'next generation' of optical fibres, because of their ability to produce tailorisable optical effects. Our success in producing these fibres in polymer was a world-first. This project will yield a fundamental understanding of the fabrication process, so that for any fibre design the optimal drawing conditions can be determined and maintained for extended draws. This will allow improved draw reproducibility and fibre uniformity so that commercial quality fibres can be produced at economic rates. We will establish quantitative relationships between drawing parameters and optical properties, thus developing optimal designs and production processes.Read moreRead less
Miniature lithium ion battery for implantable medical device applications. This project addresses National Research Priorities in the areas of breakthrough science, frontier technologies and promoting and maintaining good health. Substantial national benefit could be derived from this project: (i) Australia will innovate in an important and intensely active area in which the results will have long-lasting significance in implantable rechargeable battery development; (ii)The development of new sc ....Miniature lithium ion battery for implantable medical device applications. This project addresses National Research Priorities in the areas of breakthrough science, frontier technologies and promoting and maintaining good health. Substantial national benefit could be derived from this project: (i) Australia will innovate in an important and intensely active area in which the results will have long-lasting significance in implantable rechargeable battery development; (ii)The development of new scientific knowledge related to this project will place Australia at the forefront of an emerging domain of research body batteries; (iii) In the long term, the successful outcome of this research will lead to more reliable batteries for implantable devices, thereby promoting health care.Read moreRead less
Engineering Processable, Tough Hydrogels with Biological Activity. The project aims to design a new class of tough hydrogels to address issues in engineering complex soft and robust structures. These hydrogels have superior properties compared with current materials as they are biologically active, processable by various manufacturing techniques, elastic and have a capacity for rapid self-recovery that are ideal for soft tissues. Their physical property is tunable by modification of their compos ....Engineering Processable, Tough Hydrogels with Biological Activity. The project aims to design a new class of tough hydrogels to address issues in engineering complex soft and robust structures. These hydrogels have superior properties compared with current materials as they are biologically active, processable by various manufacturing techniques, elastic and have a capacity for rapid self-recovery that are ideal for soft tissues. Their physical property is tunable by modification of their compositions that enable construction of complex seamless structure such as valved conduit with anistropic property. Expected outcomes of this project include new insights into material design, multi-physics modelling, and multi-material additive manufacturing for broad applications in soft robotics and medical implants.Read moreRead less
Combining the soft with the hard: The assembly of artificial cell membranes on porous semiconductors. The platform technologies developed in this project will have a wide range of applications. They will reveal new insights into drug-membrane and drug-protein interactions underpinning development of a new generation of drugs acting on transmembrane proteins that are linked to a wide range of diseases. The development of membrane-based biosensing devices targeting ion channels, membrane active pe ....Combining the soft with the hard: The assembly of artificial cell membranes on porous semiconductors. The platform technologies developed in this project will have a wide range of applications. They will reveal new insights into drug-membrane and drug-protein interactions underpinning development of a new generation of drugs acting on transmembrane proteins that are linked to a wide range of diseases. The development of membrane-based biosensing devices targeting ion channels, membrane active peptides or toxins which can be applied to biomedical diagnostics, biotoxin detection, environmental and food control will be readily achievable. This international interdisciplinary nanobiotechnology programme and its outcomes will enhance Australia's abilities in frontier technologies and build research strength in nanobiotechnology.Read moreRead less
Materials World Network for the Study of Macromolecular Ferrofluids. This work will develop an understanding that will allow us to optimise the properties of ferrofluids (magnetic liquids) to suit particular applications. Although the primary application that will be investigated is the treatment of retinal detachment, the results will be applicable to a wide range of applications including ferrofluid-based actuators, electromagnetic micropumps and fluid based valves and sealing systems. During ....Materials World Network for the Study of Macromolecular Ferrofluids. This work will develop an understanding that will allow us to optimise the properties of ferrofluids (magnetic liquids) to suit particular applications. Although the primary application that will be investigated is the treatment of retinal detachment, the results will be applicable to a wide range of applications including ferrofluid-based actuators, electromagnetic micropumps and fluid based valves and sealing systems. During the course of this work, young Australian scientists will be trained in a cross-disciplinary environment in a variety of aspects of both nano- and bio- technology that are a key part of the National Research Priority: Frontier Technologies for Building and Transforming Australian Industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100149
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Spectroscopic imaging for materials, minerals and life sciences. The spectroscopic imaging equipment highlighted in this proposal will produce a number of outcomes of national benefit. First, it will elevate the impact of research in materials, minerals, and life sciences in Australia, all of which are key areas for the national economy and community. Second, the equipment will be integral to the teaching and research nexus and experiential learning facility for a new wave of materials science ....Spectroscopic imaging for materials, minerals and life sciences. The spectroscopic imaging equipment highlighted in this proposal will produce a number of outcomes of national benefit. First, it will elevate the impact of research in materials, minerals, and life sciences in Australia, all of which are key areas for the national economy and community. Second, the equipment will be integral to the teaching and research nexus and experiential learning facility for a new wave of materials science and engineering students to be educated at UniSA in the EIF-funded M2 building at Mawson Lakes. Finally, the anticipated outcomes of the research to be supported are significant and relate clearly to a number of National Research Priorities.Read moreRead less