New Generation of Secure Wireless Communications for Constrained Devices. This project aims to develop novel physical-layer security techniques to safeguard the ‘Internet of things’ (IoT). The IoT will involve billions of resource-constrained devices connected to the environment and managed though a range of wireless connections. Standard wireless security solutions are unsuitable for these devices due to the high cost of communication and computation. The project aims to develop a novel wireles ....New Generation of Secure Wireless Communications for Constrained Devices. This project aims to develop novel physical-layer security techniques to safeguard the ‘Internet of things’ (IoT). The IoT will involve billions of resource-constrained devices connected to the environment and managed though a range of wireless connections. Standard wireless security solutions are unsuitable for these devices due to the high cost of communication and computation. The project aims to develop a novel wireless security approach based on the physical-layer properties of wireless channels, to secure communications for the IoT. The fundamental advances of the first two years will be followed by a software-defined radio demonstration of the new technology. Expected project outcomes would provide innovative solutions to safeguard future commercial deployment of the IoT.Read moreRead less
Opening a New Era of High-Performance Microwave Devices. We propose a conceptually new method of manufacturing high-performance microwave components at the low-cost and short lead time using liquid form conductors and 3D printing technology. Innovation consists in developing surface roughness free waveguide- and coaxial-based RF and microwave devices, in one-single-piece. This technique can be further extended to create high-performance reconfigurable RF and microwave devices such as filters, an ....Opening a New Era of High-Performance Microwave Devices. We propose a conceptually new method of manufacturing high-performance microwave components at the low-cost and short lead time using liquid form conductors and 3D printing technology. Innovation consists in developing surface roughness free waveguide- and coaxial-based RF and microwave devices, in one-single-piece. This technique can be further extended to create high-performance reconfigurable RF and microwave devices such as filters, antennas, directional couplers, phase shifters and switches by manipulating the locations of the liquid conductors. Furthermore, the method will enable the management of heat generated in high-power applications. Australian telecommunication industry and defence will benefit from the outcome of this project.Read moreRead less
Reconfigurable Conformal Antenna Arrays for Broadband in the Sky Networks. The project aims to develop the theory and technology for a novel type of antennas, namely, reconfigurable conformal antenna arrays, for future broadband in the sky networks (BISNets). BISNets are essential to providing digital services to users on the move and in remote areas. The antenna would be conformal to the surface of the mounting platform, and its elements would be reconfigured in situ to generate the optimum rad ....Reconfigurable Conformal Antenna Arrays for Broadband in the Sky Networks. The project aims to develop the theory and technology for a novel type of antennas, namely, reconfigurable conformal antenna arrays, for future broadband in the sky networks (BISNets). BISNets are essential to providing digital services to users on the move and in remote areas. The antenna would be conformal to the surface of the mounting platform, and its elements would be reconfigured in situ to generate the optimum radiation characteristics to suit the radio environment. It is expected that the project would advance the scientific knowledge of space-borne wireless communications and sensing in general, and antennas in particular, and significantly enhance the performance and reduce the cost of BISNets.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100124
Funder
Australian Research Council
Funding Amount
$300,000.00
Summary
Coherent detection based characterisation facility for ultra broadband photonic and RF systems. The new infrastructure will allow detection of ultrahigh-speed optical and wireless signals. The facility adopts coherent detection based technologies providing superior performance in resolution, sensitivity, and bandwidth. It will play an important role in supporting research activities to accommodate phenomenal Internet growth.
Digitally controlled mm-wave band selective devices and MEMS technology. This project aims to develop millimetre-wave frequency selective devices with programmable frequency response, using a silicon technology platform. It will design and make an entire radio system, including its tuneable antenna, at the wafer level. Wafer scale integration ensures the devices are compact and low cost, and can be inserted into smart watches for touchless gesture control, and minuscule devices, too small to be ....Digitally controlled mm-wave band selective devices and MEMS technology. This project aims to develop millimetre-wave frequency selective devices with programmable frequency response, using a silicon technology platform. It will design and make an entire radio system, including its tuneable antenna, at the wafer level. Wafer scale integration ensures the devices are compact and low cost, and can be inserted into smart watches for touchless gesture control, and minuscule devices, too small to be connected to the internet today. The project will demonstrate its devices in a wireless communication system operating at unprecedented data rates of over 100 Gb/s. These could transform terrestrial and satellite communication systems and propel Australia to the forefront of wireless communications.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE150100924
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Integrated Interconnects in Data Centres and High-Performance Computing. High-speed interconnects are needed to link, transmit, retrieve, and process intensive data in a time- and energy-efficient and cost-effective manner in data centres and high-performance computing. This project aims to investigate high-speed, integrated interconnects, including novel integrated devices and transceivers on silicon platforms, flexible subsystems and overall system architecture. The research outcomes will be b ....Integrated Interconnects in Data Centres and High-Performance Computing. High-speed interconnects are needed to link, transmit, retrieve, and process intensive data in a time- and energy-efficient and cost-effective manner in data centres and high-performance computing. This project aims to investigate high-speed, integrated interconnects, including novel integrated devices and transceivers on silicon platforms, flexible subsystems and overall system architecture. The research outcomes will be beneficial to a number of industries including integrated chip and circuit design and fabrication, integrated systems, and network infrastructures, and will enable faster platforms for cloud computing, sensing, signal processing, and computational health.Read moreRead less
Transmission beyond linear capacity in fibre optics. This project aims to develop the concept and demonstrate the practicality of a new fibre optic communication technology that allows data transmission rates beyond currently accepted fundamental limits. This project aims to design and demonstrate the feasibility and practicality of utilising nonlinear modes of data transmission. This would assist in the management of fibre impairments that fundamentally limit further increase in data rate causi ....Transmission beyond linear capacity in fibre optics. This project aims to develop the concept and demonstrate the practicality of a new fibre optic communication technology that allows data transmission rates beyond currently accepted fundamental limits. This project aims to design and demonstrate the feasibility and practicality of utilising nonlinear modes of data transmission. This would assist in the management of fibre impairments that fundamentally limit further increase in data rate causing the capacity crunch problem. This is expected to present Australia with leading edge technology to compete in the area of high-speed, high-capacity communication, which is the backbone of our economy, heath, education, social participation, and security.Read moreRead less
Micro-electro-mechanical Technologies and Tuneable Millimetre-wave Systems. The project aims to develop background theory and microelectromechanical (MEM)-based techniques for monolithic fabrication that integrate highly miniaturised three-dimensional waveguides with MEM systems. These technologies shall be used to design, develop and fabricate reconfigurable millimetre-wave devices. The project aims to bring together micromachining and millimetre-wave circuits to enable the realisation of recon ....Micro-electro-mechanical Technologies and Tuneable Millimetre-wave Systems. The project aims to develop background theory and microelectromechanical (MEM)-based techniques for monolithic fabrication that integrate highly miniaturised three-dimensional waveguides with MEM systems. These technologies shall be used to design, develop and fabricate reconfigurable millimetre-wave devices. The project aims to bring together micromachining and millimetre-wave circuits to enable the realisation of reconfigurable systems on chip. These technologies offer reduced size, cost and power consumption and high functionality, unachievable with conventional millimetre wave technology alone. The planned outcomes of the project are necessary to satisfy the sharply risen requirements for current and future fourth and fifth generation (4G and 5G) wireless communications systems.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100160
Funder
Australian Research Council
Funding Amount
$250,000.00
Summary
Distributed ultra-fast optical clocks for terabit/s communications. The project aims to enable experiments with full spectrum occupation for transmission over field-deployed optical fibre. Future optical communication systems will have to use the full available spectral bandwidth and advanced multiplexing and modulation to achieve ultimate data capacity over a fibre link. To realistically test such links, experiments must be performed over "real-world" fibre links. By linking three telecoms rese ....Distributed ultra-fast optical clocks for terabit/s communications. The project aims to enable experiments with full spectrum occupation for transmission over field-deployed optical fibre. Future optical communication systems will have to use the full available spectral bandwidth and advanced multiplexing and modulation to achieve ultimate data capacity over a fibre link. To realistically test such links, experiments must be performed over "real-world" fibre links. By linking three telecoms research laboratories, the project will create a close collaboration optical network that enables this research. Anticipated outcomes are the opportunity to conduct research over field-deployed fibre links and to prototype and test communication technology over real-world links, creating a simplified path to commercialisation.Read moreRead less
Low-energy electro-photonics: novel materials, devices and systems. This project aims to develop low-power technologies for programming and tuning photonic integrated circuits (PICs). By replacing thermal tuning, the project will reduce power consumption from watts to milliwatts, which also eliminates the thermal crosstalk that limits the complexity of today's PICs. The expected outcome will be the basis for a generic field-programmable photonic chip, which can be used to rapidly prototype desig ....Low-energy electro-photonics: novel materials, devices and systems. This project aims to develop low-power technologies for programming and tuning photonic integrated circuits (PICs). By replacing thermal tuning, the project will reduce power consumption from watts to milliwatts, which also eliminates the thermal crosstalk that limits the complexity of today's PICs. The expected outcome will be the basis for a generic field-programmable photonic chip, which can be used to rapidly prototype designs for production as full custom chips as part of a new Australian industry capability. The expected benefits will be a faster innovation cycle, greater adoption of photonic technologies, and support of research into, for example, neuromorphic optical processing, and advanced communications and sensing systems.Read moreRead less