Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expe ....Development of modal control systems for adaptive optics. This project will develop a simple, robust and low-cost modal servo system for dynamic control and correction of the propagation and focussing properties of light beams. This new system will incorporate a novel optical sensor, which will be developed in this project, and a new optical corrector being developed at the University of Durham. Currently available astronomical adaptive-optics systems have produced excellent results but are expensive and complicated. A low-cost alternative will dramatically increase the use of adaptive optics in industrial, environmental and medical applications. The compensation of distortions in low-cost optical atmospheric sensors will be demonstrated.Read moreRead less
Development of microwave tomography techniques and inverse methods for biomedical imaging applications. Microwave tomography is a rapidly emerging imaging technology with highly significant applications in industry and medicine. In particular, given its sensitivity to differences between normal and malignant breast tissue, non-invasive microwave imaging has been the subject of intense research interest in the last ten years. In collaboration with workers at Chalmers University in Sweden, we wi ....Development of microwave tomography techniques and inverse methods for biomedical imaging applications. Microwave tomography is a rapidly emerging imaging technology with highly significant applications in industry and medicine. In particular, given its sensitivity to differences between normal and malignant breast tissue, non-invasive microwave imaging has been the subject of intense research interest in the last ten years. In collaboration with workers at Chalmers University in Sweden, we will develop and evaluate a scanning microwave imaging tomographic system with a number of potential industrial and biomedical applications. This appears to be a new Australian initiative.Read moreRead less
Active polymer surfaces for control of fluid movement. The realisation of a diverse array of remote or portable chemical/biological monitoring systems depends on the development of low power fluid management protocols. The use of appropriate conducting polymer surfaces should enable this to occur. We envisage the integration of these fluid management platforms into portable, remote autonomous monitoring systems for environmental industrial and biomedical applications.
Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be ....Microfibre photonics: function densification on a wavelength scale. The project will contribute to Australia's nanoscale device research and nanomanufacturing development. The project will create microfibre fabrication technologies for the creation of new optical systems of miniature proportions that will be used for cell illumination, for the creation of sensors for detection in small environments and as light tools for fundamental experiments in physics. Specialist fabrication methods will be developed that will add to the nation's skill base. The outcomes of the project will enhance Australia's knowledge capacity, research capability and will contribute significantly to each of the National Research Priorities.Read moreRead less
Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-servin ....Inhomogeneous tissue conductivity influence on the forward and inverse electroencephalogram problems in realistic head models. The brain dysfunction indicators have been extremely difficult to obtain, largely because many disorders of higher brain function reflect abnormalities of brain function rather than apparent brain structure. The neuronal generator localization and identification in this project will provide complementary information about source and timing of neural activities sub-serving higher brain function and form sequences of spatial-temporal brain activity image. That will enable the information from MRI, which has a good spatial but poor temporal resolution, and the information from EEG, which has a high temporal resolution on the scalp, to be combined to provide clinical psychologists and brain researchers a more efficient diagnostic tool.Read moreRead less
Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is ....Comparison of Techniques for the Removal of Ocular Artefact from the Electroencephalogram: A Validation Study. Although employed extensively for both research and clinical purposes, the utility of the electroencephalograph (EEG) is hampered by the contaminating effects of eye movements on these 'brain waves'. If it can be validated, the recent Australian development of a solution to this problem will mean that the EEG can be measured more quickly and accurately. This purpose of this research is to perform this validation, and its success would mean both more efficient EEG recording for the country, as well as an enhanced scientific reputation.Read moreRead less
Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to ....Biomedical imaging with spins in nanoparticles: from single cell to whole-body scanning. The engineering of new biomedical technology is critical in underpinning our understanding of physiology and in the early detection of disease. This project will construct novel instrumentation for investigating normal and diseased physiology using bioagents based on diamond and ruby nanoparticles. The imaging and tracking techniques proposed are non-invasive, nontoxic, and provide high-resolution access to specific physiological interactions of paramount importance in, for instance, understanding cancer pathways and developing strategies for targeted drug delivery.Read moreRead less
Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Ele ....Manipulation of Biological Particles Using Dielectrophoresis. Dielectrophoretic manipulation and separation of particles has numerous biological and medical applications, e.g. identification and characterisation of individual cells, purification of cell subpopulations from mixture suspensions, etc. This research project aims to develop a high-efficiency and low-cost DEP device for bio-particle manipulation. It will contribute significantly to the advancements in the field of biological Micro-Electrical-Mechanical-Systems (MEMS) and nanotechnology. Industry will benefit from the expertise on micro/nano-structures and micro/nano-manufacturing achieved by this project.Read moreRead less
The creation and opimisation of new optical fibres and novel diode-pumped fibre lasers for applications in medicine, defence and the environment. The project will widen Australian laser research and contains the important steps required to progress beyond the recent demonstrations of super high power and ultra-compact mode-locked operation. The proposed fibre lasers are internationally significant, will address many applications and will keep Australia at the leading edge of laser and optical fi ....The creation and opimisation of new optical fibres and novel diode-pumped fibre lasers for applications in medicine, defence and the environment. The project will widen Australian laser research and contains the important steps required to progress beyond the recent demonstrations of super high power and ultra-compact mode-locked operation. The proposed fibre lasers are internationally significant, will address many applications and will keep Australia at the leading edge of laser and optical fibre research. The array of new technologies necessary for the development of the proposed lasers will be vitally important to Australia's high technology industries.Read moreRead less
Enhanced Mixing Through Particle Motion in Micro-Channels. This study will help place Australia within the forefront of one the key technological endeavours of this century, the development of small-scale microfluidic devices, and, thus, should enable Australian industry to benefit relatively early from these new developments. This new research field seeks to exploit many of the major advances being made in science and engineering. Therefore, the work proposed here clearly addresses the Federal ....Enhanced Mixing Through Particle Motion in Micro-Channels. This study will help place Australia within the forefront of one the key technological endeavours of this century, the development of small-scale microfluidic devices, and, thus, should enable Australian industry to benefit relatively early from these new developments. This new research field seeks to exploit many of the major advances being made in science and engineering. Therefore, the work proposed here clearly addresses the Federal Government's National Research Priority 3, Frontier Technologies for Building and Transforming Australian Industries (priority goals: Breakthrough Science & Frontier Technology). The study will also support the research training of two postgraduate students.Read moreRead less