A high speed, high fidelity 3D printer for fabricating microfluidic devices. This project aims to develop a novel 3D printer offering the highest resolution available and fastest printing speed for the single-step manufacturing of complex microfluidic devices. New resins developed to exploit the inert liquid interface layer printing approach will provide unprecedented capability to create micron sized channels interconnected in 3D space and fabricate Lab-on-a-Chip systems that cannot be generate ....A high speed, high fidelity 3D printer for fabricating microfluidic devices. This project aims to develop a novel 3D printer offering the highest resolution available and fastest printing speed for the single-step manufacturing of complex microfluidic devices. New resins developed to exploit the inert liquid interface layer printing approach will provide unprecedented capability to create micron sized channels interconnected in 3D space and fabricate Lab-on-a-Chip systems that cannot be generated by any current fabrication approach. This novel high speed, high fidelity 3D printer and the new resins to be developed are expected to lead to more effective manufacturing approaches for portable chemical devices and to promote complex chemical analysis into the knowledge immediacy culture of today.Read moreRead less
High Performance Twist Drill Design and Drilling Operations for Machining Mould Steel. In this project a high performance drill point design, based on low drilling forces and high drill-life criteria when machining mould steel will be developed together with a computer application software for drilling force predictions, based on the ¡®unified-generalised mechanics of cutting approach¡¯, and optimal drilling feed and speed selection for minimum cost and time per hole, based on a multi-constraint ....High Performance Twist Drill Design and Drilling Operations for Machining Mould Steel. In this project a high performance drill point design, based on low drilling forces and high drill-life criteria when machining mould steel will be developed together with a computer application software for drilling force predictions, based on the ¡®unified-generalised mechanics of cutting approach¡¯, and optimal drilling feed and speed selection for minimum cost and time per hole, based on a multi-constraint drilling optimization analysis. Particular attention will be given to the manufacture of the drill point geometry. It is anticipated that the application software will enable the drill design, manufacture, performance and drilling conditions to be integrated.Read moreRead less
Predictive Mechanics of Cutting Models for Forces and Torque in Machine Tapping Operations with Straight and Helical Flute Taps. This project is aimed at developing a fundamental understanding of the cutting process as well as mechanics of cutting mathematical models and software for reliable predictions of all the force components, torque and power in machine tapping of both wrought and sintered metallic materials with straight and helical fluted taps. This investigation will provide useful fun ....Predictive Mechanics of Cutting Models for Forces and Torque in Machine Tapping Operations with Straight and Helical Flute Taps. This project is aimed at developing a fundamental understanding of the cutting process as well as mechanics of cutting mathematical models and software for reliable predictions of all the force components, torque and power in machine tapping of both wrought and sintered metallic materials with straight and helical fluted taps. This investigation will provide useful fundamental and practical information and data on the tapping operations, renowned as 'some of the most neglected operations in machining research' and as 'bottleneck operations in practice'. This project heads towards satisfying the internationally recognised pressing need for quantitatively reliable machining performance data and equations.Read moreRead less
Controlling and Predicting the Pilling Propensity of Fabrics. Pilling adversely affects the appearance of fabrics and garments. It is one of the most serious quality problems for the textile industry, particularly the wool industry. This project will examine and control the key factors that contribute to fabric pilling in the fibre-to-fabric conversion processes. It also aims to predict fabric pilling performance from these factors. This will help the industry, along the fibre to fabric chain, t ....Controlling and Predicting the Pilling Propensity of Fabrics. Pilling adversely affects the appearance of fabrics and garments. It is one of the most serious quality problems for the textile industry, particularly the wool industry. This project will examine and control the key factors that contribute to fabric pilling in the fibre-to-fabric conversion processes. It also aims to predict fabric pilling performance from these factors. This will help the industry, along the fibre to fabric chain, to understand the mechanism of pilling and to work together to manage and control this long-standing problem for the benefit of the textile industry as well as textile consumers.Read moreRead less
Development of High Performance Mechanical Sorting of Plastics for Recycling. This research program aims to develop and test a range of high performance, mechanical in-process plastics sorting technologies in conjunction with Australia's lead recycling company. Currently, recycling techniques result in an insufficient purity and quality level, thus limiting the extent of recycling and opportunity for end product applications. Increasing the purity of recycled plastics and economics of recyclin ....Development of High Performance Mechanical Sorting of Plastics for Recycling. This research program aims to develop and test a range of high performance, mechanical in-process plastics sorting technologies in conjunction with Australia's lead recycling company. Currently, recycling techniques result in an insufficient purity and quality level, thus limiting the extent of recycling and opportunity for end product applications. Increasing the purity of recycled plastics and economics of recycling, without compromising throughput levels, will result in an increase in recycling rates and the range of applications of recycled plastics.Read moreRead less
Reinforced crumbed rubber concrete for residential construction. Reinforced crumbed rubber concrete for residential construction. This project aims to use crumb rubber from used tyres to replace natural sand aggregate in concrete used in housing construction. Globally, very few of the millions of tyres discarded annually are recycled, while natural sand used in concrete is being depleted. This project intends to provide the tyre industry with a viable market for end of life tyres, and the premix ....Reinforced crumbed rubber concrete for residential construction. Reinforced crumbed rubber concrete for residential construction. This project aims to use crumb rubber from used tyres to replace natural sand aggregate in concrete used in housing construction. Globally, very few of the millions of tyres discarded annually are recycled, while natural sand used in concrete is being depleted. This project intends to provide the tyre industry with a viable market for end of life tyres, and the premix concrete industry with a “green” product for the residential construction market. Expected benefits include the increased use of a waste resource (used tyres), reduced use of a scarce natural resource (sand), and the development of an economic but green alternative concrete option for residential builders and owners.Read moreRead less
A Framework for Software Component Conformance Testing. This research aims to establish a framework - a method, set of tools and business process - within which Commercial-off-the-shelf (COTS) software components can be tested for conformance to client user requirements. There currently exists no general method for validating COTS components without access to source code. We will ?wrap? components in human readable and executable requirements specifications that will be the basis for: client/s ....A Framework for Software Component Conformance Testing. This research aims to establish a framework - a method, set of tools and business process - within which Commercial-off-the-shelf (COTS) software components can be tested for conformance to client user requirements. There currently exists no general method for validating COTS components without access to source code. We will ?wrap? components in human readable and executable requirements specifications that will be the basis for: client/supplier negotiation about component functionality; generating conformance test cases; documentation for integration testing; advertising component capabilities. Outcome: a universally applicable component conformance framework directly beneficial to SMEs, and supporting the development of a robust component marketplace.Read moreRead less
Identifying the risks and assessing the impacts of marine debris on sea turtles in Australian waters. Marine debris is a significant global issue, with the amount of waste released into our oceans growing exponentially each year. Preliminary work in Australia has shown that entanglement and ingestion of debris is a serious threat to endangered sea turtles. The project aims to determine the impact debris is having and provide ways to reduce this impact.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0346666
Funder
Australian Research Council
Funding Amount
$260,000.00
Summary
Mobile high power diode laser for thermal processing applications. This proposal seeks to establish a mobile, high-power diode laser facility for thermal processing of in-situ components in the power generation, defence, shipbuilding and mining industries. Diode lasers offer significant advantages for laser thermal processing over conventional CO2 and Nd:YAG lasers in terms of their output wavelength, size and efficiency. The mobile high power diode laser facility will help build a strong infr ....Mobile high power diode laser for thermal processing applications. This proposal seeks to establish a mobile, high-power diode laser facility for thermal processing of in-situ components in the power generation, defence, shipbuilding and mining industries. Diode lasers offer significant advantages for laser thermal processing over conventional CO2 and Nd:YAG lasers in terms of their output wavelength, size and efficiency. The mobile high power diode laser facility will help build a strong infrastructure for in-situ repair of worn components and is expected to reduce overall component repair costs and time.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0668473
Funder
Australian Research Council
Funding Amount
$710,000.00
Summary
Direct Metal Deposition Freeform Fabrication Facility for Rapid Tooling and Manufacturing. Tools, dies and moulds produce approximately 87% of plastic and metal products for industries ranging among automotive, medical, electronics, aerospace and consumer products. The industry appears to be in a state of decline with domestic demand for tools, dies and moulds shrinking because manufacturing facilities are relocating to foreign countries to take advantage of low-cost labour and manufacturing cos ....Direct Metal Deposition Freeform Fabrication Facility for Rapid Tooling and Manufacturing. Tools, dies and moulds produce approximately 87% of plastic and metal products for industries ranging among automotive, medical, electronics, aerospace and consumer products. The industry appears to be in a state of decline with domestic demand for tools, dies and moulds shrinking because manufacturing facilities are relocating to foreign countries to take advantage of low-cost labour and manufacturing costs. The new technology of Direct Metal Deposition offers an opportunity to reverse this trend by providing tools that are faster to manufacture, allow for old tools to be refurbished and to incorporate special features into the tools, to deliver competitive advantages.Read moreRead less