Interface Engineering of Multilayer Nanostructures. Nanostructured multilayers can outperform coatings of their constituent layers in both hardness and strength. It is believed that the nature of interfaces in these materials is critical since they mediate dislocation motion and crack propagation. This project will use advanced synthesis, microanalysis and theoretical methods to investigate multilayer coatings with sharp, diffuse and rough interfaces in order to reveal their failure mechanisms u ....Interface Engineering of Multilayer Nanostructures. Nanostructured multilayers can outperform coatings of their constituent layers in both hardness and strength. It is believed that the nature of interfaces in these materials is critical since they mediate dislocation motion and crack propagation. This project will use advanced synthesis, microanalysis and theoretical methods to investigate multilayer coatings with sharp, diffuse and rough interfaces in order to reveal their failure mechanisms under stress. This will enable us to understand the principles required to design the strongest structures and facilitate the selection of materials and deposition parameters in order to produce coatings optimised for a range of demanding applications.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100082
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
An Australasian facility for the automated fabrication of high performance bespoke components. A facility for the automated fabrication of high performance bespoke components: The project will create a new coordinated facility for composites research including modern automated infrastructure. The facility will bring Australia in line with leading international research centres and promote fundamental and applied research into a range of fields including underwater renewable energy systems, space ....An Australasian facility for the automated fabrication of high performance bespoke components. A facility for the automated fabrication of high performance bespoke components: The project will create a new coordinated facility for composites research including modern automated infrastructure. The facility will bring Australia in line with leading international research centres and promote fundamental and applied research into a range of fields including underwater renewable energy systems, space vehicle structures, multifunctional and smart materials and infrastructure capacity extension. The facility will position Australian research for significant international collaboration through endorsement of next-generation manufacturing technology and enable leading outcomes for Australasian science and engineering in aerospace, marine, civil, automotive, renewable energy and primary resources.Read moreRead less
Efficient construction: analysis of integrated supply chains for innovative off site housing manufacturing. The Australian housing industry is failing to meet demand. Housing construction is too slow, as indicated by a 40 per cent increase in average construction time over the last fifteen years. Industry fragmentation is an oft-cited cause of construction inefficiency. A solution is offsite manufacturing. Australia lags other countries in adoption of off-site manufacturing. To achieve adoption ....Efficient construction: analysis of integrated supply chains for innovative off site housing manufacturing. The Australian housing industry is failing to meet demand. Housing construction is too slow, as indicated by a 40 per cent increase in average construction time over the last fifteen years. Industry fragmentation is an oft-cited cause of construction inefficiency. A solution is offsite manufacturing. Australia lags other countries in adoption of off-site manufacturing. To achieve adoption and diffusion, fragmentation needs to be addressed. This project aims to analyse the factors affecting supply chain integration to support innovative offsite manufacturing and develop a novel collaborative practice based implementation model.Read moreRead less
Performance of safety critical anchors in early age concrete with SCM. This project aims to examine the performance of anchors in a range of cements, to contribute to new safety and building guidelines. Demands for faster construction cycles and increased productivity require anchors for lifting and joining concrete elements to be installed and loaded in early age concrete. Yet, best practice for evaluation of anchors is based on mature concrete. There is also increasing use of supplementary cem ....Performance of safety critical anchors in early age concrete with SCM. This project aims to examine the performance of anchors in a range of cements, to contribute to new safety and building guidelines. Demands for faster construction cycles and increased productivity require anchors for lifting and joining concrete elements to be installed and loaded in early age concrete. Yet, best practice for evaluation of anchors is based on mature concrete. There is also increasing use of supplementary cementitious materials with unknown effects on anchors. This project aims to address this construction industry challenge. The project plans to study experimentally and analytically the effect of early age creep on anchor installation and the factors affecting the slip behaviour and ultimate performance of cast-in and post-installed mechanical anchors in concretes. It is intended that these studies will then inform new design guidelines.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0453732
Funder
Australian Research Council
Funding Amount
$726,164.00
Summary
Interactive network for plasma and surface analysis. Plasma-based materials synthesis and surface modification methods have great value because they allow a wide range of ion energies and processing conditions to be achieved. Accurate in-situ measurement of the plasma conditions is crucial to the development of reliable new processes. This proposal will establish unique capabilities for carrying out diagnostic studies of plasma surface treatment technologies. The proposal will link Australia's m ....Interactive network for plasma and surface analysis. Plasma-based materials synthesis and surface modification methods have great value because they allow a wide range of ion energies and processing conditions to be achieved. Accurate in-situ measurement of the plasma conditions is crucial to the development of reliable new processes. This proposal will establish unique capabilities for carrying out diagnostic studies of plasma surface treatment technologies. The proposal will link Australia's most advanced plasma processing and diagnostic equipment located at the University of Sydney and the ANU to advanced materials and surface analysis facilities at La Trobe and RMIT Universities in Melbourne, using interactive e-science links and vacuum sample-transfer facilities.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100006
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
X-ray Microscopy Facility for Imaging Geo-materials (XMFIG). The X-ray Microscopy Facility for Imaging Geo-Materials (XMFIG) will allow the investigation, with near-synchrotron capabilities, of the three dimensional internal structures and chemical compositions of geo-materials under relevant environmental conditions by engineers, geologists and materials scientists.
Innovative composite systems with enhanced resilience to extreme loads. The rapidly increasing global population (projected to be 9.8 billion by 2050) and global urbanisation have created a demand for the construction industry, thereby increasing the pressure on our planet’s limited resources for the construction industry. This high demand can yield detrimental effects to the environment due to the high carbon footprint of conventional construction materials, and is amplified by the threat of ac ....Innovative composite systems with enhanced resilience to extreme loads. The rapidly increasing global population (projected to be 9.8 billion by 2050) and global urbanisation have created a demand for the construction industry, thereby increasing the pressure on our planet’s limited resources for the construction industry. This high demand can yield detrimental effects to the environment due to the high carbon footprint of conventional construction materials, and is amplified by the threat of accidental or deliberate extreme loadings to buildings, which can trigger fatal progressive collapse events. The proposed project aims to develop an innovative structural system with that possesses superior structural resilience to extreme loads and progressive collapse using lightweight eco-friendly materials. Read moreRead less
Industrial Transformation Training Centres - Grant ID: IC150100023
Funder
Australian Research Council
Funding Amount
$4,000,000.00
Summary
ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. This training centre aims to unlock the potential for growth of Australia’s prefabricated building industry by creating a sustainable training ecosystem including both industry and universities. It seeks to enable the next generation of engineers and architects to apply advanced manufacturing principles to prefabricated modular buildings. This emerging ....ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. ARC Training Centre for Advanced Manufacturing of Prefabricated Housing. This training centre aims to unlock the potential for growth of Australia’s prefabricated building industry by creating a sustainable training ecosystem including both industry and universities. It seeks to enable the next generation of engineers and architects to apply advanced manufacturing principles to prefabricated modular buildings. This emerging highly trained workforce, driven by the needs of the customer, should identify innovations in the use of advanced materials, designs for manufacturing, and assembly. The centre aims to secure a competitive advantage for Australia in the global value chain leading to local employment growth and increased exports of prefabricated products and services.Read moreRead less
Novel test and design methods for base course reinforced flexible pavements. This project aims to develop the mechanics of geosynthetic-reinforced flexible pavements as an urgent need for the Australian pavement industry to build more sustainable and economical roads. Novel laboratory test apparatus and in-situ test programs, and mathematical models will be developed, for the first time, to capture the responses of reinforced base courses in a complete and optimised way to determine the paramete ....Novel test and design methods for base course reinforced flexible pavements. This project aims to develop the mechanics of geosynthetic-reinforced flexible pavements as an urgent need for the Australian pavement industry to build more sustainable and economical roads. Novel laboratory test apparatus and in-situ test programs, and mathematical models will be developed, for the first time, to capture the responses of reinforced base courses in a complete and optimised way to determine the parameters for pavement design and performance evaluation. The outcomes will enable reliable prediction of reinforced pavement behaviour, leading to better-performing geosynthetic products and more resilient pavements, reduced material usage and damage in pavements, and less environmental impact and maintenance cost.Read moreRead less
The Role of Colour and Luminance in Spatial Location. How does the brain form our impression of the world? Black and white images appear normal to us. However, colour images without luminance variation have little depth, suggesting that the brain does not process colour in the same way as luminance. A series of fresh experiments examine how colour and luminance are utilised for seeing the depth and position of objects. The results will help us to understand how the first stages of visual process ....The Role of Colour and Luminance in Spatial Location. How does the brain form our impression of the world? Black and white images appear normal to us. However, colour images without luminance variation have little depth, suggesting that the brain does not process colour in the same way as luminance. A series of fresh experiments examine how colour and luminance are utilised for seeing the depth and position of objects. The results will help us to understand how the first stages of visual processing in the brain shape our sense of the world, and help develop theories of human vision, as well as animal and machine models of vision.Read moreRead less