A new biomechanical model for understanding aging of stored Red Blood Cells. This project plans to develop a novel modelling framework to accurately represent the biomechanical properties of red blood cells (RBCs) over time under stored conditions. Stored RBCs suffer ageing-related deformability changes which impede RBC functions. The framework aims to integrate models for RBC membrane, inside haemoglobin and outside storage solution, and accounts for ageing effects by embedding time-dependent c ....A new biomechanical model for understanding aging of stored Red Blood Cells. This project plans to develop a novel modelling framework to accurately represent the biomechanical properties of red blood cells (RBCs) over time under stored conditions. Stored RBCs suffer ageing-related deformability changes which impede RBC functions. The framework aims to integrate models for RBC membrane, inside haemoglobin and outside storage solution, and accounts for ageing effects by embedding time-dependent correlations. It should provide new insights and understanding of the mechanisms of deformability changes of RBCs during stored lifespan. Therefore, it should significantly improve blood storage industry practices in terms of improving RBC storage protocols with preventative ageing strategies.Read moreRead less
Task-centric Synthesis for Wearable Assistive Robots. Wearable Assistive Robots, designed to be worn on the human body, show tremendous potentials to provide what the wearer lacks in performing physically challenging tasks, such as seen in manufacturing, agricultural and healthcare industries. However, fundamental challenges still prevent the realisation of such benefits in the practical settings outside the laboratory. This project addresses these challenges by establishing (1) a systematic des ....Task-centric Synthesis for Wearable Assistive Robots. Wearable Assistive Robots, designed to be worn on the human body, show tremendous potentials to provide what the wearer lacks in performing physically challenging tasks, such as seen in manufacturing, agricultural and healthcare industries. However, fundamental challenges still prevent the realisation of such benefits in the practical settings outside the laboratory. This project addresses these challenges by establishing (1) a systematic design approach for wearable robots to achieve the intended task while optimising other relevant considerations, such as human factors and the practical bulk of the robot; and (2) a novel control and interaction strategy to accommodate the variations in realistic living and working environments.Read moreRead less
Fatigue Behaviour of Dragline Tubular Structures. Fatigue failure is a major concern for dragline tubular structures. Several catastrophic collapses of such structure occurred. The fatigue behaviour of such large tubular structures is unknown. Fatigue cracks were observed in many existing draglines. The latest international design codes are inadequate to address this issue. The project will develop reliable methodologies for design, inspection, strengthening and assessment of such structures. Th ....Fatigue Behaviour of Dragline Tubular Structures. Fatigue failure is a major concern for dragline tubular structures. Several catastrophic collapses of such structure occurred. The fatigue behaviour of such large tubular structures is unknown. Fatigue cracks were observed in many existing draglines. The latest international design codes are inadequate to address this issue. The project will develop reliable methodologies for design, inspection, strengthening and assessment of such structures. The outcome will be reduced manufacturing and operational costs and a reduced catastrophic failure risk. This will increase the international competitiveness of Australian mining industry. Several other industry sectors will be benefited from the technology developed in this project.Read moreRead less
Quantitative structural health assessment of large membrane-like structures. This project aims to develop a new approach, based on remote sensing and computational modelling, to assess and manage the structural health of large floating covers used for odour control and biogas harvesting to prevent unexpected failures. The project has potential benefits for high-value-added manufacturing and maintenance of these floating covers by Australian industry.
Low emission, Gas Turbine Air Compressor (GTAC) demonstrator. Compressed air production consumes a significant portion of electricity generated world-wide. The fragility of power infrastructure in many developed countries, and the growing Chinese economy, has created very large markets for compressed air plants that run off Diesel and natural gas fuels. Australia's reliance on coal introduces the added greenhouse incentive of reduced electricity use.
This project will demonstrate a novel air ....Low emission, Gas Turbine Air Compressor (GTAC) demonstrator. Compressed air production consumes a significant portion of electricity generated world-wide. The fragility of power infrastructure in many developed countries, and the growing Chinese economy, has created very large markets for compressed air plants that run off Diesel and natural gas fuels. Australia's reliance on coal introduces the added greenhouse incentive of reduced electricity use.
This project will demonstrate a novel air compressor concept that features a natural gas fuelled micro-gas turbine. This device is expected to have comparable thermal efficiency to other air compressors, but with very significantly reduced greenhouse and overall emissions, much quieter operation, lower cost and increased device compactness.
Read moreRead less
Characterisation and Mitigation of Caustic Cracking: A Safety and Maintenance Concern in Alumina and Pulp-and-Paper Processing. Extraction of alumina from mineral bauxite (Bayer process) and pulp-and-paper processing (Kraft process) are major industries in Australia. Cracking of reaction vessels, digesters, cleaning tanks and pipework are major concern for plant integrity, occupational health, safety and environment. Caustic cracking is often the first suspect when a failure occurs. The propose ....Characterisation and Mitigation of Caustic Cracking: A Safety and Maintenance Concern in Alumina and Pulp-and-Paper Processing. Extraction of alumina from mineral bauxite (Bayer process) and pulp-and-paper processing (Kraft process) are major industries in Australia. Cracking of reaction vessels, digesters, cleaning tanks and pipework are major concern for plant integrity, occupational health, safety and environment. Caustic cracking is often the first suspect when a failure occurs. The proposed program will investigate the role of critical impurities and additives, temperature and stress fluctuations in caustic cracking of mild steel and their weldments (known to be most susceptible). This project will also develop an intellectual and infrastructural base that will also be a vital resource for several Australian industries where such cracking is a major concern.Read moreRead less
Variable Geometry Cooling Intakes for Passenger Vehicles. Cars reject engine heat via air forced through the grille, radiator and engine bay. The associated "cooling drag" increases total aerodynamic drag by 10-15% hence increasing fuel consumption. The highest heat load that needs to be rejected by the engine determines the quantity of cooling air, resulting in systems that are over designed for typical driving. This research provides a strategy of adjusting the cooling airflow to match the ....Variable Geometry Cooling Intakes for Passenger Vehicles. Cars reject engine heat via air forced through the grille, radiator and engine bay. The associated "cooling drag" increases total aerodynamic drag by 10-15% hence increasing fuel consumption. The highest heat load that needs to be rejected by the engine determines the quantity of cooling air, resulting in systems that are over designed for typical driving. This research provides a strategy of adjusting the cooling airflow to match the engine requirements (via variable geometry intakes that can be under the control of the engine management computer) offering substantial reductions in fuel consumption and emissions.Read moreRead less
Hybrid cooling for coal fired power stations. Water shortage is a nation wide problem facing Australian industries. The project will directly benefit the Victorian power industry through water saving. If the new proposed hybrid cooling system concept is proved to be practically feasible, it will put the Australian power industry in a strong competitive position in terms of its efficiencies and waste heat recovery technology. Lowering the temperature of water into the cooling tower by 2 degree, b ....Hybrid cooling for coal fired power stations. Water shortage is a nation wide problem facing Australian industries. The project will directly benefit the Victorian power industry through water saving. If the new proposed hybrid cooling system concept is proved to be practically feasible, it will put the Australian power industry in a strong competitive position in terms of its efficiencies and waste heat recovery technology. Lowering the temperature of water into the cooling tower by 2 degree, by using the hybrid cooling system, it would save over 17,500,000 tons of makeup water per year for the Victorian power industry alone. At the same time, the waste heat recovered by the heat pump can be fed back to the power generation cycle. Read moreRead less
A Novel Failure Approach for Multi-stage Aluminium Sheet Forming. This project aims to reduce waste in the production of aluminium cans. Over 200 billion aluminium beverage cans per year are produced worldwide (including 30 billion in Australia), but there is a problematic level of waste due to aluminium sheet forming failure. Current simulation of a multi-stage sheet forming process for rigid-packaging components results in a higher rejection rate due to the inaccuracy of conventional forming a ....A Novel Failure Approach for Multi-stage Aluminium Sheet Forming. This project aims to reduce waste in the production of aluminium cans. Over 200 billion aluminium beverage cans per year are produced worldwide (including 30 billion in Australia), but there is a problematic level of waste due to aluminium sheet forming failure. Current simulation of a multi-stage sheet forming process for rigid-packaging components results in a higher rejection rate due to the inaccuracy of conventional forming and fracture limit models. A novel development in this work is the design of a nonlinear strain path which is intended to maximise the forming limit of aluminium alloys and also estimate the safety margin up to the necking or fracture limit in the early die design stage.Read moreRead less
Practical model-based control for low emission and low cost diesel engines. Practical model-based control for low emission and low cost diesel engines. This project aims to develop and implement robust multivariable model predictive control algorithms for low emission and low cost diesel engines that reduce calibration effort. Legislative and increasing consumer requirements demand better control approaches than have been deployed in production vehicles to date, and motivate the use of model bas ....Practical model-based control for low emission and low cost diesel engines. Practical model-based control for low emission and low cost diesel engines. This project aims to develop and implement robust multivariable model predictive control algorithms for low emission and low cost diesel engines that reduce calibration effort. Legislative and increasing consumer requirements demand better control approaches than have been deployed in production vehicles to date, and motivate the use of model based techniques to meet performance and emissions specifications. However, current model-based controllers amplify the calibration effort and increase development costs as the tuning parameters are not related to time domain specifications. The anticipated outcome is new model based control architectures that improve diesel engine operation and reduce its calibration effort and cost.Read moreRead less