Interactions between linear and interfacial crystalline defects and their impact on mechanical properties in nanostructured metals and alloys. The project aims to apply in-situ deformation transmission electron microscopy to investigate the interactions among crystalline defects in nanostructured metallic materials and to explore the effect of the interactions on mechanical properties. The results will guide the structural design of nanomaterials with superior mechanical properties.
Discovery Early Career Researcher Award - Grant ID: DE180100736
Funder
Australian Research Council
Funding Amount
$362,446.00
Summary
High performing multifunctional silicon nanomaterials for bio-applications. This project aims to develop high-performance, multifunctional silicon nanomaterials, and to understand their physicochemical properties for bio-imaging. A range of high-quality multifunctional silicon-based bio-probes with novel fluorescent and magnetic properties will be developed for enhancing bio-imaging. The outcomes of the project will further strengthen Australia’s leading position in the targeted areas of Advance ....High performing multifunctional silicon nanomaterials for bio-applications. This project aims to develop high-performance, multifunctional silicon nanomaterials, and to understand their physicochemical properties for bio-imaging. A range of high-quality multifunctional silicon-based bio-probes with novel fluorescent and magnetic properties will be developed for enhancing bio-imaging. The outcomes of the project will further strengthen Australia’s leading position in the targeted areas of Advanced Materials and Nanotechnology.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100121
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is ....An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is not straightforward. It is clear, however, that novel materials manipulated at fine scales will be key. Transmission electron microscopy (TEM) guides the development of sustainable technologies. The new TEM facility at ANU will accelerate current studies, by enhancing the materials research portfolio, and extending national and international collaborations in materials, geological and earth sciences.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100033
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image s ....In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image structural and compositional changes of materials under stimuli at a speed and resolution previously unachievable. This project will drive pioneering research in the fields of Materials Science, Chemistry and Catalysis to solve problems in advanced manufacturing, energy, technology and the environment.Read moreRead less
Using extreme conditions to synthesise new materials. This project aims to synthesise useful materials from non-crystalline light element precursors. Boron, carbon and nitrogen are the hardest known solids, and their ability to form many kinds of chemical bonds offers opportunities for attractive new materials. This project will apply high pressures and temperatures to non-crystalline precursor materials to access previously unobtainable synthesis conditions. This project will create strong and ....Using extreme conditions to synthesise new materials. This project aims to synthesise useful materials from non-crystalline light element precursors. Boron, carbon and nitrogen are the hardest known solids, and their ability to form many kinds of chemical bonds offers opportunities for attractive new materials. This project will apply high pressures and temperatures to non-crystalline precursor materials to access previously unobtainable synthesis conditions. This project will create strong and hard materials with tuneable optical and electronic properties. The expected outcome is new light materials that emit and detect light in the far ultraviolet for biological imaging and tough materials with low friction needed for motors and regenerative technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100030
Funder
Australian Research Council
Funding Amount
$541,705.00
Summary
National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented ....National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented resolution. It is expected this will yield discoveries in nanoscale physics and materials science. It will create interdisciplinary collaborations by linking Australian scientists who use high-resolution multimodal characterisation methods to innovate and develop materials and device technologies.Read moreRead less
Nanostructured anti-reflection coatings for LED applications. Light emitting diode (LED) devices play a critical role in emerging technologies with important current and future applications in medicine, health, horticulture, nanotechnology, biology and photonics. The basic laws of optics, however, only allow a very small amount of light to escape their surfaces due to very strong intrinsic internal reflection. This project aims to optimally couple light by design to nanostructured metal - low lo ....Nanostructured anti-reflection coatings for LED applications. Light emitting diode (LED) devices play a critical role in emerging technologies with important current and future applications in medicine, health, horticulture, nanotechnology, biology and photonics. The basic laws of optics, however, only allow a very small amount of light to escape their surfaces due to very strong intrinsic internal reflection. This project aims to optimally couple light by design to nanostructured metal - low loss zinc oxide surface coatings to significantly improve the light extraction efficiency. These breakthroughs in nanoscience and nanotechnology are expected to lead to enhanced LED performance, efficiency and longevity.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100116
Funder
Australian Research Council
Funding Amount
$350,000.00
Summary
Facilities of thermophysical characterisations at nanometre scale for development of advanced materials, energy technologies and biomedical components. Australia's energy, mining, metallurgical, defence, pharmaceutical and biomedical industries are spearheading the advancement of technologies in the global competitive market. They are the engines of Australian economic strength. Future progress of these industries will be largely driven by advances in materials. The installation of the propose ....Facilities of thermophysical characterisations at nanometre scale for development of advanced materials, energy technologies and biomedical components. Australia's energy, mining, metallurgical, defence, pharmaceutical and biomedical industries are spearheading the advancement of technologies in the global competitive market. They are the engines of Australian economic strength. Future progress of these industries will be largely driven by advances in materials. The installation of the proposed facilities will add a new dimension to high-level research performance and significantly enhance the capability for characterisation of various forms of materials and biomedical components in Australia. The continual development of advanced materials and energy technology will potentially provide a sustainable means for meeting the increasing global challenge for the industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE160100168
Funder
Australian Research Council
Funding Amount
$650,000.00
Summary
Facility for Characterisation of BioNanomaterials. Facility for characterisation of bionanomaterials:
The facility for characterisation of bionanomaterials aims to provide researchers with access to an integrated facility for advanced characterisation of nanomaterials from inception to application in biomedicine. Nanotechnology has contributed to significant advances across a range of disciplines and is increasingly used in biomedical applications. The facility aims to allow detailed examinatio ....Facility for Characterisation of BioNanomaterials. Facility for characterisation of bionanomaterials:
The facility for characterisation of bionanomaterials aims to provide researchers with access to an integrated facility for advanced characterisation of nanomaterials from inception to application in biomedicine. Nanotechnology has contributed to significant advances across a range of disciplines and is increasingly used in biomedical applications. The facility aims to allow detailed examination of how nanomaterials interact in biological systems; from individual nanoparticles to whole animals, and through developing this fundamental understanding provide the means to produce new and highly effective nanomaterials for biomedical applications. The facility plans to support programs using nanomaterials for molecular imaging and intelligent drug delivery, while developing greater understanding of how to create more effective nanobiomaterials.Read moreRead less