Tuning the electrolytes for high efficiency solar splitting of water. This project will develop a new technology that uses ionic liquids and sunlight to split water into hydrogen and oxygen to be used as a clean fuel. Australia has abundant sunlight, is very close to the growing energy markets of the Asia-Pacific region, and is ideally placed to benefit from this new technology.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE100100121
Funder
Australian Research Council
Funding Amount
$1,000,000.00
Summary
An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is ....An analytical transmission electron microscope for the investigation of functional materials, earth processes and novel condensed matter. Sustainablity depends on the delivery of clean energy, pristine water and air, and the manufacture of consumer products with small environmental footprints. Modelling long-term impacts requires an understanding of the hydro-geological cycles. The technologies are well known—efficient electronics, fuel cells, lightweight composites, and so on—but delivery is not straightforward. It is clear, however, that novel materials manipulated at fine scales will be key. Transmission electron microscopy (TEM) guides the development of sustainable technologies. The new TEM facility at ANU will accelerate current studies, by enhancing the materials research portfolio, and extending national and international collaborations in materials, geological and earth sciences.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100033
Funder
Australian Research Council
Funding Amount
$1,200,000.00
Summary
In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image s ....In situ Environmental Electron Microscope Facility. This project aims to establish an In situ Environmental Electron Microscope Facility to characterise real-time and dynamic changes in nanomaterials at the atomic scale. We will combine a cutting-edge 'in situ' gas/heating/electrical bias holder with new camera and analysis technology on a transmission electron microscope. This facility will be a sophisticated suite of equipment that will innovate and transform microscopy in Australia to image structural and compositional changes of materials under stimuli at a speed and resolution previously unachievable. This project will drive pioneering research in the fields of Materials Science, Chemistry and Catalysis to solve problems in advanced manufacturing, energy, technology and the environment.Read moreRead less
Diamane: A New Frontier in Materials Science. Single-layer diamond (‘diamane’) is a new frontier of material research although its preparation is still in infancy with many structures predicted possible but have not been made experimentally. Built on a new chemical route for 'graphite to diamane' transformation, this project will address a research gap towards synthesising new diamane(-like) nanostructures and developing an in-depth understanding of the chemically induced phase transformation an ....Diamane: A New Frontier in Materials Science. Single-layer diamond (‘diamane’) is a new frontier of material research although its preparation is still in infancy with many structures predicted possible but have not been made experimentally. Built on a new chemical route for 'graphite to diamane' transformation, this project will address a research gap towards synthesising new diamane(-like) nanostructures and developing an in-depth understanding of the chemically induced phase transformation and structure-property correlations, which will have far-reaching impact on scientific fields beyond carbon research. Preliminary data points to both feasibility and impact for discovering new materials and technologies, which will bring foreseeable scholarly, economic, and social benefits.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE180100030
Funder
Australian Research Council
Funding Amount
$541,705.00
Summary
National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented ....National facility for nanoscale characterisation of luminescent materials. The project aims to establish a national facility for nanoscale characterisation of advanced optoelectronic materials, including atomically-thin materials, luminescent nanocrystals, metamaterials, and plasmonic nanostructures. The combination of a highly focused electron beam, and novel light detection optics, will enable temperature-dependent, angle, polarisation and time-resolved luminescence analysis with unprecedented resolution. It is expected this will yield discoveries in nanoscale physics and materials science. It will create interdisciplinary collaborations by linking Australian scientists who use high-resolution multimodal characterisation methods to innovate and develop materials and device technologies.Read moreRead less
Discovery Early Career Researcher Award - Grant ID: DE130100592
Funder
Australian Research Council
Funding Amount
$375,000.00
Summary
Fabrication strategies for nanophotonic devices. The project will develop novel strategies to engineer nanophotonic entities to control and guide light at the nanoscale. These nanostructures will open up new avenues for integrated multifunctional devices spanning sensing, light emission and quantum communications, positioning Australia at the frontier of nanoscience and quantum technologies.
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100156
Funder
Australian Research Council
Funding Amount
$289,500.00
Summary
3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-ti ....3D Two-Photon Nanoprinter for Advanced Multi-Functional Materials & Devices. The Nanoscribe Photonic Professional GT2 Two-Photon 3D Printer enables tailoring materials’ architecture at nanoscale. This results in unique optical, mechanical, electrical, chemical, biochemical, and acoustic properties enabling a wealth of cutting-edge research activities in variety of fields including mechanical/optical/electrical metamaterials, bioinspired hard/soft materials, biomaterials (e.g., structured cell-tissue interfaces), biomedical devices (implantable devices and drug-delivery systems), nanofluidics, and photonic crystals. In each of these fields, we will use GT2 to print variety of polymers, hydrogels, metals and ceramics, for example by printing polymer-derived nanoceramics that will be simultaneously strong and tough.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE200100197
Funder
Australian Research Council
Funding Amount
$1,102,947.00
Summary
Cryogenic Scanning Microwave Measurement Facility for Quantum Materials. This proposal addresses a major experimental capacity gap in Australian infrastructure for research and development of novel electronic materials and nanoscale quantum devices for future technologies. It will establish Australia's first non-contact, non-destructive, cryogenic scanning microwave microscopy facility for advanced materials characterization enabling new studies of these materials in the 2 to 300 Kelvin temperat ....Cryogenic Scanning Microwave Measurement Facility for Quantum Materials. This proposal addresses a major experimental capacity gap in Australian infrastructure for research and development of novel electronic materials and nanoscale quantum devices for future technologies. It will establish Australia's first non-contact, non-destructive, cryogenic scanning microwave microscopy facility for advanced materials characterization enabling new studies of these materials in the 2 to 300 Kelvin temperature range. The facility will provide crucial new information for the development of future quantum materials, enhancing our international competitiveness in the development of next-generation electronic materials and device technologies.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE140100104
Funder
Australian Research Council
Funding Amount
$500,000.00
Summary
Collaborative facility for high resolution fabrication, imaging, and characterisation of nanostructured materials. Collaborative facility for high resolution fabrication, imaging, and characterisation of nanostructured materials: The development of the next generation of electronic, optical, and biomedical devices requires methods that can quickly manipulate and characterise matter at the nanoscale. This project will establish new tools that will allow researchers to build novel device structure ....Collaborative facility for high resolution fabrication, imaging, and characterisation of nanostructured materials. Collaborative facility for high resolution fabrication, imaging, and characterisation of nanostructured materials: The development of the next generation of electronic, optical, and biomedical devices requires methods that can quickly manipulate and characterise matter at the nanoscale. This project will establish new tools that will allow researchers to build novel device structures and analyse them at nanoscale spatial resolutions. The new facilities are required to meet the demands of a growing number of innovative projects being undertaken within a large multidisciplinary consortium of research groups. The facilities will be housed in state-of-the art laboratories and managed as open access resources for researchers which will enable advances in the areas of energy harvesting, environmental monitoring, and electronics.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE210100086
Funder
Australian Research Council
Funding Amount
$489,250.00
Summary
A platform for probing nanoscale magnetic states under multiple actuations. The proposed facility offers unique capabilities to investigate the interactions of spin with charge and lattice under external stimuli of light illumination, mechanical stress and voltage bias at various temperatures in a wide range of functional materials. Precise laser magnetometry and video-rate Kerr microscopy are integrated in a single magneto-optic Kerr effect (MOKE) system. This platform also aims to provide opti ....A platform for probing nanoscale magnetic states under multiple actuations. The proposed facility offers unique capabilities to investigate the interactions of spin with charge and lattice under external stimuli of light illumination, mechanical stress and voltage bias at various temperatures in a wide range of functional materials. Precise laser magnetometry and video-rate Kerr microscopy are integrated in a single magneto-optic Kerr effect (MOKE) system. This platform also aims to provide optical magnetic circular dichroism (OMCD) to assess electronic structures of semiconductors and biomedical materials. It will facilitate multidisciplinary research collaborations between academics and industries to advance next-generation spintronics, optoelectronics, energy conversion and storage, and biomedical technologies.Read moreRead less