Atomic scale information for the design of nanomaterials. This project aims to develop a new tool to measure the 3-D distribution of atoms within nanoparticles. For the rational design of nanoparticles, it is necessary to compare the atomic scale structure to the resulting performance. But this information is hard to access. This projects aims to develop new methods so that atom probe microscopy can be applied to experimentally measure the precise 3-D location and identity of the individual atom ....Atomic scale information for the design of nanomaterials. This project aims to develop a new tool to measure the 3-D distribution of atoms within nanoparticles. For the rational design of nanoparticles, it is necessary to compare the atomic scale structure to the resulting performance. But this information is hard to access. This projects aims to develop new methods so that atom probe microscopy can be applied to experimentally measure the precise 3-D location and identity of the individual atoms within nanoparticles, and apply them in the development of alloy catalyst nanoparticles that could make the sustainable production of liquid fuels from biomass commercially viable. These new tools would be useful across the wide range of engineering applications for which nanomaterials are currently being developed.Read moreRead less
Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosiv ....Reducing gas and ash corrosion in advanced power generation. Advanced power generation using new coal combustion technologies increases energy efficiency and makes carbon dioxide capture possible, but increases the corrosion problems. This project aims to determine the corrosion behaviour of chromia-scale forming iron- and nickel-base alloys in the presence of deposits (coal ashes and salts) under carbon dioxide rich gas atmospheres. The increased understanding of alloy behaviour in hot corrosive ashes and gases, will permit more effective materials design and selection leading to more efficient and economic technologies for reliable and low cost carbon capture in energy production, waste-energy conversion and related industries.Read moreRead less
High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multipl ....High temperature corrosion induced by multiple secondary oxidants . Heat resisting chromia-forming alloys passivate successfully in clean, dry air at temperatures up to about 950°C. However, this performance is degraded by secondary oxidants (carbon, sulphur, chlorine, water vapour), leading to corrosion failure in important industries. The project aims to investigate the effect of these secondary oxidants on corrosion behaviour of chromia-forming alloys, to identify interactions between multiple oxidants within the scale, to establish the mechanisms of oxide scale penetration by foreign species, and to evaluate scales on different alloy types. The results will provide a basis for improved design/selection of heat resisting chromia-forming alloys, key to power generation industries.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE120100098
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
A comprehensive gas/vapour sorption facility for the fast advancement of decarbonised energy technologies. Solutions to clean energy production, storage and use are critical to Australia’s prosperity, yet there is a significant lack of targeted research facilities for the development of the highly needed materials and technologies for powering a sustainable Australia. This facility will bring research efforts closer to practical solutions.
One-dimensional nanostructured catalysts for heterogeneous catalytic conversion of biomass to furan derivatives. A sustainable future depends on the partial replacement of petrochemicals, and the use of bioresources synthesise fine chemicals and fuels. This project will develop new-generation novel catalysts to make this possible by syntheisising essential starting compounds from biomass using a green chemical process.
Industrial Transformation Training Centres - Grant ID: IC210100023
Funder
Australian Research Council
Funding Amount
$4,943,949.00
Summary
ARC Training Centre in Bioplastics and Biocomposites. There is unprecedented growth in demand for bioderived and biodegradable materials. This Training Centre in Bioplastics and Biocomposites will capitalise on Australia’s abundance of the requisite natural bioresources to drive advances in technology for the development of bioplastic and biocomposite products for the new bioeconomy. The aim is to deliver leading edge research with a holistic focus on technical, social, policy and end of life so ....ARC Training Centre in Bioplastics and Biocomposites. There is unprecedented growth in demand for bioderived and biodegradable materials. This Training Centre in Bioplastics and Biocomposites will capitalise on Australia’s abundance of the requisite natural bioresources to drive advances in technology for the development of bioplastic and biocomposite products for the new bioeconomy. The aim is to deliver leading edge research with a holistic focus on technical, social, policy and end of life solutions, training a cohort of industry ready research specialists to underpin Australia’s transition to a globally significant bioplastics and biocomposites industry, while at the same time laying the foundations for accelerated growth in this space.Read moreRead less
Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum pho ....Two-dimensional plasmonic heterogeneous nanostructures for photocatalysis. This project aims to design and explore two-dimensional heterogeneous photocatalysts that can convert solar energy into usable chemical energy. This project will investigate the correlation between surface plasmonic resonance and photocatalytic activities on the atomic level. Heterogeneous engineering and in-situ investigation of atomic-level photocatalytic dynamics is expected to yield several new full-solar-spectrum photocatalysts. The project is expected to contribute to the understanding of the processes and mechanisms underlying photocatalysis, and lead to useable, stable and durable photocatalytics. The outcomes will enable efficient, cost-effective and reliable production of clean energy in a low-emission way.Read moreRead less
Corrosion of heat resisting alloys in steam/hydrogen-rich environment . Hydrogen is a clean fuel for energy future. Its production and utilisation unavoidably involve water vapour and hydrogen at high temperature which is however corrosive to materials used in the system. This project aims to investigate corrosion behaviour of heat resistant alloys in the presence of both hydrogen and water vapour, mechanisms of water transport in oxide scale, and the effect of hydrogen on water vapour corrosion ....Corrosion of heat resisting alloys in steam/hydrogen-rich environment . Hydrogen is a clean fuel for energy future. Its production and utilisation unavoidably involve water vapour and hydrogen at high temperature which is however corrosive to materials used in the system. This project aims to investigate corrosion behaviour of heat resistant alloys in the presence of both hydrogen and water vapour, mechanisms of water transport in oxide scale, and the effect of hydrogen on water vapour corrosion. Alloying effects on corrosion rates will be defined and methods of slowing or preventing water vapour corrosion in the presence of hydrogen will be devised. The results will provide a basis for improved design/selection of heat resisting alloys for hydrogen production and hydrogen utilisation industries.Read moreRead less
Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used ....Controlling Anisotropic Growth of Metal Oxide Crystals in Aqueous Solution by Selective Adsorption of Small Molecules. The proposed research will enhance our ability to make both light emitting diodes (LEDs) and piezoelectric actuators from ZnO. LEDs are a high efficiency light source that save energy compared to conventional illumination sources and can be fabricated in thin films. The proposal is to also bring the technology for device fabrication to Australia where it can ultimately be used to broaden the economic base of the country. The knowledge of crystal growth rate and crystal morphology control can be applied to improvements in the efficiency of alumina production which is already an important contributor to Australian exports.Read moreRead less
Monolithic Solar Thermal Photocatalytic Membrane for Hydrogen Production. This ambitious project aims to develop a new concept of monolithic membranes composed of photocatalysts embedded in highly efficient solar thermal graphene. Such a membrane will be first of its kind and is able to utilise full solar spectrum for scalable seawater desalination and direct splitting to produce hydrogen without the need to concentrate sunlight. Expected outcomes include chemically and structurally tailored mem ....Monolithic Solar Thermal Photocatalytic Membrane for Hydrogen Production. This ambitious project aims to develop a new concept of monolithic membranes composed of photocatalysts embedded in highly efficient solar thermal graphene. Such a membrane will be first of its kind and is able to utilise full solar spectrum for scalable seawater desalination and direct splitting to produce hydrogen without the need to concentrate sunlight. Expected outcomes include chemically and structurally tailored membranes and 2D floating prototypes for real life hydrogen production, and in-depth understanding of working mechanism to facilitate up-scaled renewable hydrogen generation. Significant benefits in minimising fossil fuel consumption, increasing energy security, and expanding competitive clean energy industry are promised.Read moreRead less