Homogeneous Combustion Catalysts for Efficiency Improvements and Emission Reduction in Diesel Engines. Australia currently consumes about 25 billion litres of diesel annually through the mining industry, road transportation and electricity generation for remote communities which presentins a significant cost and carbon footprint. A small reduction of say 2.5% in diesel consumption nationwide by improving engine performance and energy efficiency can result in more than $0.5 billion in savings and ....Homogeneous Combustion Catalysts for Efficiency Improvements and Emission Reduction in Diesel Engines. Australia currently consumes about 25 billion litres of diesel annually through the mining industry, road transportation and electricity generation for remote communities which presentins a significant cost and carbon footprint. A small reduction of say 2.5% in diesel consumption nationwide by improving engine performance and energy efficiency can result in more than $0.5 billion in savings and a reduction of 1.75 million tonnes in greenhouse gas emission annually. The homogeneous combustion catalysts, to be developed in this research for direct doping into diesel supply system, will help realise these objectives and contribute to the development of an environmentally sustainable Australia.Read moreRead less
An Innovative Powertrain Architecture and Optimal Energy Management for Plug-in Hybrid Electric Vehicles. Plug-in hybrid electric vehicle technologies will significantly reduce the dependence of vehicles on fossil fuels, thereby reducing their emissions of carbon and other pollutants. The project will produce new knowledge in automotive engineering, software tools for vehicle design and a novel powertrain architecture with key components almost ready for commercial application. The research will ....An Innovative Powertrain Architecture and Optimal Energy Management for Plug-in Hybrid Electric Vehicles. Plug-in hybrid electric vehicle technologies will significantly reduce the dependence of vehicles on fossil fuels, thereby reducing their emissions of carbon and other pollutants. The project will produce new knowledge in automotive engineering, software tools for vehicle design and a novel powertrain architecture with key components almost ready for commercial application. The research will directly contribute to the use of green energy and the reduction of vehicles' harmful environmental impacts. The nation will benefit from new economic activity, such as increased exports of automotive parts and components, and from strengthening its position as a world leader in reducing carbon emissions.Read moreRead less
Variable Geometry Cooling Intakes for Passenger Vehicles. Cars reject engine heat via air forced through the grille, radiator and engine bay. The associated "cooling drag" increases total aerodynamic drag by 10-15% hence increasing fuel consumption. The highest heat load that needs to be rejected by the engine determines the quantity of cooling air, resulting in systems that are over designed for typical driving. This research provides a strategy of adjusting the cooling airflow to match the ....Variable Geometry Cooling Intakes for Passenger Vehicles. Cars reject engine heat via air forced through the grille, radiator and engine bay. The associated "cooling drag" increases total aerodynamic drag by 10-15% hence increasing fuel consumption. The highest heat load that needs to be rejected by the engine determines the quantity of cooling air, resulting in systems that are over designed for typical driving. This research provides a strategy of adjusting the cooling airflow to match the engine requirements (via variable geometry intakes that can be under the control of the engine management computer) offering substantial reductions in fuel consumption and emissions.Read moreRead less
An Integrated Starter Alternator for Automobiles using a New Wide Speed Range Interior Permanent Magnet Motor and a Matrix Z-Source Converter. The projected growth of power demand and efficiency of future automobiles calls for a suitable integrated starter-alternator (ISA) to be developed. While interim solutions have been offered, a true ISA is still considered to be more than five years away. Considering the huge worldwide market, an ISA developed in Australia is expected to benefit the large ....An Integrated Starter Alternator for Automobiles using a New Wide Speed Range Interior Permanent Magnet Motor and a Matrix Z-Source Converter. The projected growth of power demand and efficiency of future automobiles calls for a suitable integrated starter-alternator (ISA) to be developed. While interim solutions have been offered, a true ISA is still considered to be more than five years away. Considering the huge worldwide market, an ISA developed in Australia is expected to benefit the large Australian automobile industry significantly. The CIs has strong links with local developers and suppliers of power semiconductors and motors, who have participated in the recent developments already carried out. A proven ISA developed locally should be a boon for these industries.Read moreRead less
Analysis, simulation, fabrication and characterization of reliable, robust and scalable compact cooling elements based on semiconductor nanostructures. Modern electronic, microelectronic and optoelectronic devices generally work better when they are cooler. We aim to develop a semiconductor nanostructure cooling element which directly integrates into existing devices. The solid-state cooling element will be reliable, robust, scalable and operate in any orientation. The basis of operation is ....Analysis, simulation, fabrication and characterization of reliable, robust and scalable compact cooling elements based on semiconductor nanostructures. Modern electronic, microelectronic and optoelectronic devices generally work better when they are cooler. We aim to develop a semiconductor nanostructure cooling element which directly integrates into existing devices. The solid-state cooling element will be reliable, robust, scalable and operate in any orientation. The basis of operation is thermionic emission - electrons are the working fluid. Our project combines (1) analysis and simulation, (2) fabrication of nanostructures and (3) experimental test-benching using optical and electrical methods. The outcome of this research has the potential to revolutionize cooling of modern electronic and photonic systems, from computer motherboards to mobile phones.Read moreRead less
A methodology for the control of harmonics due to large distorting loads. The ideal electricity supply has a voltage of prescribed frequencey and value with a sinusoidal waveshape. Modern electronic equipment such as digital commuication equipment and automatic manufacturing lines draw non-sinusoidal currents which distort the voltage waveform. Electricity suppliers are responsible for limiting voltage distoration to levels set by national standards. Techniques have been developed to allow them ....A methodology for the control of harmonics due to large distorting loads. The ideal electricity supply has a voltage of prescribed frequencey and value with a sinusoidal waveshape. Modern electronic equipment such as digital commuication equipment and automatic manufacturing lines draw non-sinusoidal currents which distort the voltage waveform. Electricity suppliers are responsible for limiting voltage distoration to levels set by national standards. Techniques have been developed to allow them to determine the maximum level of current distortion to which a particular customer is entitled. This project will developand verify a method for determining if a particular customer exceeds that entitlement.Read moreRead less
Novel methods for enhancing room temperature figure of merit of thermoelectric/thermionic materials for refrigeration applications. With global warming and an increased awareness of climate change, devices such as thermoelectric modules can be part of the solution, particularly if their relative power and efficiency can be increased. The aim of this project is to bring together theoreticians, experimentalists, materials scientists, and industrial partners with complementary expertise to develop ....Novel methods for enhancing room temperature figure of merit of thermoelectric/thermionic materials for refrigeration applications. With global warming and an increased awareness of climate change, devices such as thermoelectric modules can be part of the solution, particularly if their relative power and efficiency can be increased. The aim of this project is to bring together theoreticians, experimentalists, materials scientists, and industrial partners with complementary expertise to develop new techniques and methods for fabricating novel thermoelectric/thermionic materials with high figure of merit, ZT, for solid state refrigeration applications. The success of the project will lead to a 3 to 5 fold increase in the market share of thermoelectric cooler and will have a significant impact on the Australian economy and reduce greenhouse emissions and global warming. Read moreRead less
Synthesis of functionalised metal oxide beads with hierarchical pores for radionuclide and metal sequestration. The central aim of this project is to fabricate nanostructured materials to address the worldwide issue of nuclear waste. These novel materials, with tailored porosity and surface functionality, will decrease both radioactive waste volume and the potential for environmental risk. The collaboration between the Caruso group at the University of Melbourne and the Luca group at ANSTO will ....Synthesis of functionalised metal oxide beads with hierarchical pores for radionuclide and metal sequestration. The central aim of this project is to fabricate nanostructured materials to address the worldwide issue of nuclear waste. These novel materials, with tailored porosity and surface functionality, will decrease both radioactive waste volume and the potential for environmental risk. The collaboration between the Caruso group at the University of Melbourne and the Luca group at ANSTO will educate more scientists and students in the areas of nuclear science and engineering, and the environmental impact of nuclear power generators. Such expertise is currently in high demand around the world, thereby enhancing Australia's position in the global nuclear field.Read moreRead less
The use of numerical and experimental techniques to develop energy efficient open refrigerated display cabinets. This project will provide knowledge for Australian industry to develop new energy efficient refrigerated display cabinets, putting Australia in the forefront of commercial refrigeration display cabinet technologies. This will have a significant impact on sustainability of our environment and will assist Australia to meet present and future international climate obligations by contrib ....The use of numerical and experimental techniques to develop energy efficient open refrigerated display cabinets. This project will provide knowledge for Australian industry to develop new energy efficient refrigerated display cabinets, putting Australia in the forefront of commercial refrigeration display cabinet technologies. This will have a significant impact on sustainability of our environment and will assist Australia to meet present and future international climate obligations by contributing to the reduction of greenhouse emissions. The Government has already introduced new MEPS levels, and are planning to increase these to more stringent levels in 2007. The development of the techniques proposed in this application will be essential for manufacturers if they are to economically meet these MEPS level requirements. Read moreRead less
Simulation and characterisation of opto-thermionic cooling devices. Opto-thermionic devices combine thermionic emission and laser cooling to achieve the maximum cooling power and highest thermal efficiency. These devices are ultra small, very reliable and fully integrable. Many important problems need to be solved to improve the performance of this new class of solid-state cooling devices. One is to understand and manipulate the electron-hole radiative recombination and minimize the Auger proces ....Simulation and characterisation of opto-thermionic cooling devices. Opto-thermionic devices combine thermionic emission and laser cooling to achieve the maximum cooling power and highest thermal efficiency. These devices are ultra small, very reliable and fully integrable. Many important problems need to be solved to improve the performance of this new class of solid-state cooling devices. One is to understand and manipulate the electron-hole radiative recombination and minimize the Auger process in reduced dimensionality devices such as quantum wells. Researchers at Wollongong and Lund will collaborate on theoretical analysis, computer simulation and electrical/optical measurements to solve this problem.Read moreRead less