Long-span cold-formed steel portal frames. Novel solutions will be developed for building portal frames in cold-formed steel at effectively twice the span currently available. Economies are derived from using cold-formed steel, which will benefit the end consumer and help the Australian steel industry to maintain its position as preeminent provider of innovative cold-formed steel solutions.
Analysis and design of midrise built-up cold-formed steel structures. The project will develop an analytical and computational basis for designing midrise buildings in cold-formed steel. It will enable solutions with high column capacities and high lateral load resistance to be realised by using built-up sections, thus overcoming the current barrier to constructing buildings up to 10 storeys from cold-formed steel and enabling green, fully recyclable and rapidly constructed buildings to be achie ....Analysis and design of midrise built-up cold-formed steel structures. The project will develop an analytical and computational basis for designing midrise buildings in cold-formed steel. It will enable solutions with high column capacities and high lateral load resistance to be realised by using built-up sections, thus overcoming the current barrier to constructing buildings up to 10 storeys from cold-formed steel and enabling green, fully recyclable and rapidly constructed buildings to be achieved. Experimental, analytical and computational studies will be undertaken and synthesised into efficient design guidelines for practising engineers, including structural reliability analyses at system level of midrise buildings featuring innovative built-up multi-section columns and integrated shear panels.Read moreRead less
Offsite manufacture reimagined for high-performance adaptable housing. The project aims to address housing performance and affordability in Australia by deploying adaptable design for spatial reconfiguration and component reuse, to advance offsite timber manufacture towards energy efficient and healthy homes as mainstream practice. The intended outcome is the development, prototyping and monitoring of an offsite manufactured panelised lightweight timber system for high-performance homes, that is ....Offsite manufacture reimagined for high-performance adaptable housing. The project aims to address housing performance and affordability in Australia by deploying adaptable design for spatial reconfiguration and component reuse, to advance offsite timber manufacture towards energy efficient and healthy homes as mainstream practice. The intended outcome is the development, prototyping and monitoring of an offsite manufactured panelised lightweight timber system for high-performance homes, that is adaptable to all Australian climates and long-term household changes. This will contribute to the sustainable growth of the Australian housing market with significant benefits on housing affordability, adaptable design and long-lasting performance, while boosting the offsite manufactured timber construction sector.Read moreRead less
Understanding the performance of cold-formed steel frame wall systems in fires to design for superior fire resistance. This project will develop new light gauge steel frame (LSF) wall systems with superior fire resistance rating and associated design rules to enable innovative and safe applications of these wall systems in various building applications. This will enable expansion of the worldwide market for LSF wall systems by the industry partner.
Built-up cold-formed steel structures. The building industry is seeing a rapid uptake of joining two or more cold-formed steel sections to form large built-up sections with high carrying capacities. The joining consists of screws, or similar fasteners, placed intermittently along the member. The ease of joining encourages innovation in forming versatile new built-up section shapes in expanding areas of application. The project will provide guidelines and numerical tools for the efficient structu ....Built-up cold-formed steel structures. The building industry is seeing a rapid uptake of joining two or more cold-formed steel sections to form large built-up sections with high carrying capacities. The joining consists of screws, or similar fasteners, placed intermittently along the member. The ease of joining encourages innovation in forming versatile new built-up section shapes in expanding areas of application. The project will provide guidelines and numerical tools for the efficient structural design of built-up sections through experimental and theoretical research, studying the new failure modes pertaining to built-up sections, the increase in strength achievable from composite action and the optimum arrangement of fasteners. Read moreRead less
Rotation Capacity of Joints in SFRC Moment Resisting Beams and Frames. In January 2014 the draft Australian Standard for the design of concrete bridges was released; this is the first standard in Australia, and one of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for flexure and shear, strict limitations are placed on application where large plastic rotations are expected. This study invest ....Rotation Capacity of Joints in SFRC Moment Resisting Beams and Frames. In January 2014 the draft Australian Standard for the design of concrete bridges was released; this is the first standard in Australia, and one of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for flexure and shear, strict limitations are placed on application where large plastic rotations are expected. This study investigates the moment-rotation performance of SFRC beam-column connections containing economical fibre dosages. The study is expected to provide data on the post-ultimate behaviour and robustness of SFRC moment hinges and determine moment-rotation relations for adoption by engineers and Standards bodies.Read moreRead less
Development of efficient, robust and architecturally-flexible structural systems using innovative blind-bolted connections. The aim of the proposed project is to develop structural systems that have sufficient stiffness, strength, and ductility to withstand code-specified loads and that will be competitive in the marketplace. The development of demonstrable cost-effective structural systems is essential if these types of systems are to be widely adopted in practice, thus allowing Australian manu ....Development of efficient, robust and architecturally-flexible structural systems using innovative blind-bolted connections. The aim of the proposed project is to develop structural systems that have sufficient stiffness, strength, and ductility to withstand code-specified loads and that will be competitive in the marketplace. The development of demonstrable cost-effective structural systems is essential if these types of systems are to be widely adopted in practice, thus allowing Australian manufacturers of blind bolts and steel tubes to achieve a greater market share.Read moreRead less
New Systems for High Rise Steel Structures in Rising Factory Construction. This project will develop new and innovative ways of constructing steel structures using the rising factory concept. The rising factory is a 10 storey enclosure where the final high-rise building is safely constructed within a watertight envelope which rises as the building progresses. The project will perform the necessary research to make possible high-rise steel structural systems consisting of hot-rolled (heavy gauge ....New Systems for High Rise Steel Structures in Rising Factory Construction. This project will develop new and innovative ways of constructing steel structures using the rising factory concept. The rising factory is a 10 storey enclosure where the final high-rise building is safely constructed within a watertight envelope which rises as the building progresses. The project will perform the necessary research to make possible high-rise steel structural systems consisting of hot-rolled (heavy gauge) and cold-formed (light gauge) steel structural members and connections which can be used in the rising factory. The main benefits of the rising factory are the waterproof construction environment and the substantially increased safety as a result of no external cranes.
Read moreRead less
Mixed Mode Torsion-Shear-Bending Failure in SFRC Elements . In 2017 and 2018 the Australian Standards for the design of concrete bridges and structures were released; these are some of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for shear and bending of SFRC girders, the rules exclude the use fibres to carry torsional moments. This study investigates the torsion-bending-shear interaction ....Mixed Mode Torsion-Shear-Bending Failure in SFRC Elements . In 2017 and 2018 the Australian Standards for the design of concrete bridges and structures were released; these are some of the first in the world, to include design procedures for steel fibre reinforced concrete (SFRC) in a comprehensive way. While rules have been introduced for shear and bending of SFRC girders, the rules exclude the use fibres to carry torsional moments. This study investigates the torsion-bending-shear interaction performance of SFRC members. The study will provide vital data needed for for adoption by engineers and Standards bodies.Read moreRead less
Hybrid steel-framed structural systems for mid-rise buildings. The project aims to develop solutions for lightweight structural systems. Hybrid steel structures are those constructed from a mixture of conventional hot-rolled steel sections and tubes combined with lightweight cold-formed steel structural members. There is an increasing need to provide prefabricated structural systems that are highly constructible and modular in mid-rise (5–10 storeys) residential apartment and commercial building ....Hybrid steel-framed structural systems for mid-rise buildings. The project aims to develop solutions for lightweight structural systems. Hybrid steel structures are those constructed from a mixture of conventional hot-rolled steel sections and tubes combined with lightweight cold-formed steel structural members. There is an increasing need to provide prefabricated structural systems that are highly constructible and modular in mid-rise (5–10 storeys) residential apartment and commercial buildings. The major problem in producing efficient hybrid systems is the connections between the hot-rolled framing members and the lightweight cold-formed members. The main aim of the project is to carry out experimental and theoretical research into the hybrid connections. The expected outcomes of the research are more efficient and standardised structural connections and systems.Read moreRead less