Fibre-Polymer Composites With Graded Microstructure. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucleus) and a tough fibrous periphery (annulus). The graded composite approach of this proposal represents a significant advance over spinal fusion, and over the current generation of spinal disk protheses (metal plates with springs/polymers as shock absorber ....Fibre-Polymer Composites With Graded Microstructure. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucleus) and a tough fibrous periphery (annulus). The graded composite approach of this proposal represents a significant advance over spinal fusion, and over the current generation of spinal disk protheses (metal plates with springs/polymers as shock absorbers). Chronic back pain affects a significant proportion of the population and is primarily caused by failure of the spinal disk. Therefore a strong social and economic imperative exists to develop engineering solutions to this problem.Read moreRead less
Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown ....Surface engineering of biomaterials for optimal bone bonding characteristics. The ideal bone-implant material is hydroxyapatite. Chemically similar to bone mineral, hydroxyapatite is capable of inducing bone ongrowth. An ideal surface coating for metal hip implants, plasma spraying has been the preferred commercial hydroxyapatite coating technique. Until recently, it was always presumed that the bioactivity of hydroxyapatite resulted from its surface chemistry. However, a recent study has shown that the bioactivity of HAp coatings strongly correlates with surface roughness on the scale of bone cells. This project will explore cell-attachment behaviour for hydroxyapatite coatings prepared by plasma spraying compared with engineered surface morphology/chemistry by microlithography and vapour coating.Read moreRead less
Functionally graded fibre-polymer composites: a novel material for spinal disk prostheses. Chronic back pain affects a significant proportion of the population and is primarily caused by failure of the spinal disk. A strong social/economic imperative exists to develop engineering solutions to this problem. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucle ....Functionally graded fibre-polymer composites: a novel material for spinal disk prostheses. Chronic back pain affects a significant proportion of the population and is primarily caused by failure of the spinal disk. A strong social/economic imperative exists to develop engineering solutions to this problem. This project concerns the development of a novel fibre-polymer functionally graded composite material that mimics the structure of the spinal disk. The spinal disk comprises a soft core (nucleus) and a tough fibrous periphery (annulus). The graded composite approach of this proposal represents a significant advance over spinal fusion, and over the alternative spinal disk protheses in clinical use or in the patent literature.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE0561186
Funder
Australian Research Council
Funding Amount
$447,967.00
Summary
Surface Mechanical Property Analysis Facility. The aim of this proposal is to develop a facility for the mechanical properties analysis of material surfaces. The facility will enable an understanding of the performance of materials in a wide range of contact and abrasion situations and in very small volumes such as thin films and components of multiphase composites. The unique features of the proposed facility are that it is capable of analysis down to exceptionally low sub-micron length scale, ....Surface Mechanical Property Analysis Facility. The aim of this proposal is to develop a facility for the mechanical properties analysis of material surfaces. The facility will enable an understanding of the performance of materials in a wide range of contact and abrasion situations and in very small volumes such as thin films and components of multiphase composites. The unique features of the proposed facility are that it is capable of analysis down to exceptionally low sub-micron length scale, under multiple forms of loading and over a range of temperatures. It is applicable to the design of abrasion resistant materials, characterisation of very thin surface films for applications such as microelectronics and biomedical implants and design of advanced composites.Read moreRead less
Corrosion of heat resisting alloys in steam/hydrogen-rich environment . Hydrogen is a clean fuel for energy future. Its production and utilisation unavoidably involve water vapour and hydrogen at high temperature which is however corrosive to materials used in the system. This project aims to investigate corrosion behaviour of heat resistant alloys in the presence of both hydrogen and water vapour, mechanisms of water transport in oxide scale, and the effect of hydrogen on water vapour corrosion ....Corrosion of heat resisting alloys in steam/hydrogen-rich environment . Hydrogen is a clean fuel for energy future. Its production and utilisation unavoidably involve water vapour and hydrogen at high temperature which is however corrosive to materials used in the system. This project aims to investigate corrosion behaviour of heat resistant alloys in the presence of both hydrogen and water vapour, mechanisms of water transport in oxide scale, and the effect of hydrogen on water vapour corrosion. Alloying effects on corrosion rates will be defined and methods of slowing or preventing water vapour corrosion in the presence of hydrogen will be devised. The results will provide a basis for improved design/selection of heat resisting alloys for hydrogen production and hydrogen utilisation industries.Read moreRead less
Kesterite solar cell coated architectural stainless steel. This project aims to develop cost-effective, high-performance kesterite architectural stainless steel coated with solar cells for application in roofing, skin and facades of smart buildings. The project will integrate expertise in producing kesterite solar cells with expertise in manufacturing new steel to eliminate toxic, scarce materials and high-cost processes employed in conventional solar-driven steel. The initial target of the proj ....Kesterite solar cell coated architectural stainless steel. This project aims to develop cost-effective, high-performance kesterite architectural stainless steel coated with solar cells for application in roofing, skin and facades of smart buildings. The project will integrate expertise in producing kesterite solar cells with expertise in manufacturing new steel to eliminate toxic, scarce materials and high-cost processes employed in conventional solar-driven steel. The initial target of the project would be to increase kesterite cell efficiency to beyond 10 per cent, and ultimately beyond 17 per cent, but still at a low cost.Read moreRead less
Linkage Infrastructure, Equipment And Facilities - Grant ID: LE110100229
Funder
Australian Research Council
Funding Amount
$230,000.00
Summary
Carbon-free high temperature vacuum sintering facility. This facility will provide an extremely clean sintering environment for development of advanced materials free from imperfections for applications which range from energy conversion to medical components. It will ensure that Australia is an important international leader in both fundamental research and industrial innovation.
Efficient photovoltaic-electrochemical water splitting for clean hydrogen. This project aims to develop a novel, low cost and high performance monolithic photovoltaic-electrochemical (PV-EC) device for clean hydrogen production. This device tailors and integrates low cost and high performance thin film and tandem photovoltaics for water splitting with the aim of achieving high solar to hydrogen conversion efficiency towards 20%. Earth abundant and stable catalysts will be developed in this proje ....Efficient photovoltaic-electrochemical water splitting for clean hydrogen. This project aims to develop a novel, low cost and high performance monolithic photovoltaic-electrochemical (PV-EC) device for clean hydrogen production. This device tailors and integrates low cost and high performance thin film and tandem photovoltaics for water splitting with the aim of achieving high solar to hydrogen conversion efficiency towards 20%. Earth abundant and stable catalysts will be developed in this project to replace noble based catalysts, as well as novel architectures for electrical contacting, feed-through and catalyst integration in PV-EC devices. These innovations offer high performance and the potential for device costs 2 to 3 orders of magnitude lower than recent world record photoelectrochemical devices. Read moreRead less
Defect control for high-performance green kesterites energy materials. This project will tackle the fundamental challenge of defect control of the quaternary compound kesterite, revolutionizing the way we can understand the hidden defect-evolution process and design accordingly effective defect-control approaches. This will be realized by a systematic approach integrating multiscale materials characterization, process and materials modeling, and linking microscopic local chemical potential and m ....Defect control for high-performance green kesterites energy materials. This project will tackle the fundamental challenge of defect control of the quaternary compound kesterite, revolutionizing the way we can understand the hidden defect-evolution process and design accordingly effective defect-control approaches. This will be realized by a systematic approach integrating multiscale materials characterization, process and materials modeling, and linking microscopic local chemical potential and macroscopic processing conditions, and associated compound properties and device performance to control defects evolution. Successfully achieved, this project will realize full potential of kesterite in photovoltaic and photoelectrochemical applications, and leading to new discoveries in other compound energy materials.Read moreRead less