Nickel(III) Oxyhydroxide (NiOOH) as a Positive Electrode Material in Primary Cells. In recent years, the demands put on batteries has increased due to the development of sophisticated portable electronic devices. With the currently available primary battery systems finding it difficult to cope with these demands, there is considerable incentive to develop an improved system with an appropriate capability. This project focuses on nickel(III) oxyhydroxide (NiOOH) as a cathode material. NiOOH is us ....Nickel(III) Oxyhydroxide (NiOOH) as a Positive Electrode Material in Primary Cells. In recent years, the demands put on batteries has increased due to the development of sophisticated portable electronic devices. With the currently available primary battery systems finding it difficult to cope with these demands, there is considerable incentive to develop an improved system with an appropriate capability. This project focuses on nickel(III) oxyhydroxide (NiOOH) as a cathode material. NiOOH is used widely in rechargeable battery systems, where it performs adequately even under severe discharge conditions. However, in primary battery systems, NiOOH suffers from self discharge. This project aims to use the performance capabilities of NiOOH in a primary system, by investigating ways to improve its stability. The benefits for Delta EMD will be protection of their existing business, as well as opening the door to the commercial manufacture of an advanced export material.Read moreRead less
Capacitance Fade Mechanisms in Carbon-Based Supercapacitors. Energy storage is of significant importance to the global community. This project addresses certain performance issues concerning prolonged energy storage in supercapacitors, which are an emerging technology in the electronics industry. CAP-XX is Australia's only manufacturer of supercapacitors, and the improvements to their products that will result from this work, will lead to significant returns to them and the Australian economy.
Designing Nano-Pore Architectures for High Power Battery Materials. In recent years there has been a steady increase in the popularity of portable electronic devices. Of the numerous battery systems available, alkaline MnO2/Zn cells are most commonly used to power these devices. However, as the device power requirements increase, so too does the demand on these cells to perform. Delta EMD, Australia, currently exports ~10% of the world's supply of MnO2 for these cells. Their collaboration with p ....Designing Nano-Pore Architectures for High Power Battery Materials. In recent years there has been a steady increase in the popularity of portable electronic devices. Of the numerous battery systems available, alkaline MnO2/Zn cells are most commonly used to power these devices. However, as the device power requirements increase, so too does the demand on these cells to perform. Delta EMD, Australia, currently exports ~10% of the world's supply of MnO2 for these cells. Their collaboration with personnel from the University of Newcastle, who have significant expertise in the field of MnO2 research, will focus on designing a superior MnO2 with optimized nano-pore architecture for high power battery applications.Read moreRead less
Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. In ....Surface Processing of Photo-Sensitive Semiconducting Oxides for Solar-Hydrogen. Aim: To enhance the performance of titania-based semiconducting photo-electrodes for the generation of hydrogen from water using sunlight. Means: Engineering of the surface and near-surface layers so as to increase photo-sensitivity and reactivity with water. Significance: Success will provide the key functional component of photo-electrochemical cells for the mass production of renewable and clean hydrogen. Innovation: For the first time, the properties controlling photo-sensitivity (defect disorder; charge transport; and chemically-induced, local, surface electric fields) will be modified. Outcomes: Technologies for the production of fuel (hydrogen) using renewable energy (solar energy) and a renewable resource (water).
Read moreRead less
PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of tit ....PROCESSING OF REDUCED-BAND-GAP TITANIA FOR SOLAR-HYDROGEN. The present project involves the development of materials and devices for solar-hydrogen using photo-assisted water decomposition. The research focusses on the processing of titanium dioxide (titania) with substantially enhanced photo-sensitivity and, consequently, increased efficiency of the conversion of solar energy into chemical energy (hydrogen) through imposition of the optimal Ti/O ratio. Significance: processing technology of titania for photo-electrochemical devices for hydrogen generation and water decontamination. Innovation: processing of titania with reduced band-gap to be achieved through optimised oxygen nonstoichiometry. Outcome: processing technology of titania with outstanding photo-sensitivity.Read moreRead less
Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be disc ....Tailoring the microwave dielectric properties of promising electroceramics for use in wireless telecommunication components and devices. This project aims to develop and tailor the microwave dielectric properties of promising electroceramic materials specifically targeting next generation wireless telecommunications applications. The partnership between the ANU and the Australian company Microwave and Materials Designs has the potential to enable new microwave electroceramic materials to be discovered and then incorporated into new microwave components and/or devices developed in response to the requirements of the international wireless telecommunications market. The requested PhD student will gain experience in both the industrial and academic worlds and the skills needed to be part of Australia's high-tech workforce. Read moreRead less
Porous Mineral Formulations for Controlled-Release Applications. The controlled release of biologically active agents from host materials is a process that is used routinely in pharmaceuticals delivery but has received only limited attention in large-scale, low-cost areas such as the agrochemicals industry. Here we identify a number of rare tubular mineral phases as having great potential for low-cost controlled release. These little-studied minerals, for which high quality deposits exist in Aus ....Porous Mineral Formulations for Controlled-Release Applications. The controlled release of biologically active agents from host materials is a process that is used routinely in pharmaceuticals delivery but has received only limited attention in large-scale, low-cost areas such as the agrochemicals industry. Here we identify a number of rare tubular mineral phases as having great potential for low-cost controlled release. These little-studied minerals, for which high quality deposits exist in Australia, consist of hollow tubules of nanoscale dimension. This project involves the first ever studies of the kinetics of guest release from these fascinating hosts, and promises to generate important new technologies in agrochemical delivery.Read moreRead less
Self-zoning in natural uraninite: radiation driven chemical separation. In this project we aim to explore and define the effects of the substitution of lead and rare earths on the crystal chemistry of uranium dioxide (uraninite) and related minerals, towards establishing the oxygen stoichiometry (as a measure of oxygen fugacity) of these materials both in nature and in synthetic materials. This project will use synthetic materials to understand the variability of oxygen stoichiometry, establish ....Self-zoning in natural uraninite: radiation driven chemical separation. In this project we aim to explore and define the effects of the substitution of lead and rare earths on the crystal chemistry of uranium dioxide (uraninite) and related minerals, towards establishing the oxygen stoichiometry (as a measure of oxygen fugacity) of these materials both in nature and in synthetic materials. This project will use synthetic materials to understand the variability of oxygen stoichiometry, establish accurate and precise structures for the oxides, and distinguish both long range and short-range order which is critical to understanding both natural and synthetic U-oxides. This will help to define the geochemical conditions leading to the formation of deposits like Olympic Dam towards potential economic benefit.Read moreRead less
Lithium/Sulfur rechargeable battery for power applications. The Lithium/Sulphur battery system is very promising for large-scale power applications as it has the highest energy density and lowest cost among various types of rechargeable batteries. However, the degradation of the capacity and short cycle life of Li/S battery have been problematic for commercial development. The aim of this project is to study the mechanisms of capacity fading and to develop effective means such as use of carbon n ....Lithium/Sulfur rechargeable battery for power applications. The Lithium/Sulphur battery system is very promising for large-scale power applications as it has the highest energy density and lowest cost among various types of rechargeable batteries. However, the degradation of the capacity and short cycle life of Li/S battery have been problematic for commercial development. The aim of this project is to study the mechanisms of capacity fading and to develop effective means such as use of carbon nanotubes and nanosize composite absorbents to improve the cycle life of Li/S batteries. The expected outcomes are the development of sulphur-containing cathode materials and polymer electrolytes, enabling electric vehicles to be a technically competitive and environmentally superior transportation option.Read moreRead less
Investigation of Nano-materials for use in Lithium Rechargable Batteries. Lithium ion batteries are emerging as a new generation of rechargeable batteries for power sources of portable electronics. The aim of this project is to explore potential applications of novel nano-materials such as intermetallic alloys, transition-metal oxides, and carbon nanotubes as anode materials in lithium-ion rechargeable batteries. Significance and expected outcomes will be the development of alternative anode ma ....Investigation of Nano-materials for use in Lithium Rechargable Batteries. Lithium ion batteries are emerging as a new generation of rechargeable batteries for power sources of portable electronics. The aim of this project is to explore potential applications of novel nano-materials such as intermetallic alloys, transition-metal oxides, and carbon nanotubes as anode materials in lithium-ion rechargeable batteries. Significance and expected outcomes will be the development of alternative anode materials with improved performance in energy capacity and cycle life over existing anode materials. This could open opportunities for Australian mineral companies to take advantage of the developments to produce value-added new products.Read moreRead less